Features

• Better leveling with uniform finish, allows uni-directional sanding
• 3 by 24 inches, 150 grit
• P-grade regalite mineral construction
• Aggressive initial cut, consistent cut rate & long life
• Higher stock removal with less heat & loading

Subjects:  1. Sanders    2. Belts   

Features

• Better leveling with uniform finish, allows uni-directional sanding
• 4 by 24 inches, 60 grit
• P-graded regalite mineral construction
• Aggressive initial cut, consistent cut rate & long life
• Higher stock removal with less heat & loading

Subjects:  1. Sanders    2. Belts   

Features

• Cotton backing, non-stretch, non-slip
• 4 by 24 inches, 100 grit
• Resin over resin industrial belts
• With open coat to resist loading
• Sharp aluminum oxide grains with heat resistant bond

Subjects:  1. Sanders    2. Belts   

Features

• Cotton backing, non-stretch, non-slip
• 3 by 21 inches, 60 grit
• Resin over resin industrial belts
• With open coat to resist loading
• Sharp aluminum oxide grains with heat resistant bond

Subjects:  1. Sanders    2. Belts   

Features

• Organizes cords for orderly appearance
• Keeps cords safely out of the way

Subjects:  1. Electrical    2. Cable Ties    3. (Zip Ties)   

Features

• Cotton backing, non-stretch, non-slip
• 3 by 21 inches, 100 grit
• Resin over resin industrial belts
• With open coat to resist loading
• Sharp aluminum oxide grains with heat resistant bond

Reviews (1)

Belt usage
I just bought a 10 pack of these belts.They are 3M but made in Brazil and packaged in Mexico.They run in either direction.This way you can run in the other direction and pull off some of the buildup.I have grit 100 and ran a belt for 1.5 hours.It is holding up well after that run.Good price. ... Read more

Subjects:  1. Sanders    2. Belts   

Features

• Better leveling with uniform finish, allows uni-directional sanding
• 3 by 24 inches, 80 grit
• P-graded regalite mineral construction
• Aggressive initial cut, consistent cut rate & long life
• Higher stock removal with less heat & loading

Subjects:  1. Sanders    2. Belts   

Features

• Better leveling with uniform finish, allows uni-directional sanding
• 3 by 24 inches, 120 grit
• P-graded regalite mineral construction
• Aggressive initial cut, consistent cut rate & long life
• Higher stock removal with less heat & loading

Subjects:  1. Sanders    2. Belts   

Features

• Organizes cords for orderly appearance
• Keeps cords safely out of the way

Subjects:  1. Electrical    2. Cable Ties    3. (Zip Ties)   

Features

• Cotton backing, non-stretch, non-slip
• 3 by 24 inches, 60 grit
• Resin over resin industrial belts
• With open coat to resist loading
• Sharp aluminum oxide grains with heat resistant bond

Subjects:  1. Sanders    2. Belts   

Features

• 4 by 24 inches, 50 grit
• Resin over resin industrial belts
• With open coat to resist loading
• Sharp aluminum oxide grains with heat resistant bond
• Cotton backing, non-stretch, non-slip

Subjects:  1. Sanders    2. Belts   

Features

• 3 by 21 inches, 50 grit
• Resin over resin industrial belts
• With open coat to resist loading
• Sharp aluminum oxide grains with heat resistant bond
• Cotton backing, non-stretch, non-slip

Subjects:  1. Sanders    2. Belts   

Features

• Open coated with tough hard aluminum oxide mineral
• Lasts 10 times longer, sands 10 times faster than ordinary sandpaper
• Sands wood, metal, plastic, and fine glass
• Coarse and X-Coarse includes four sheets per pack

Features

• Cotton backing, non-stretch, non-slip
• 3 by 24 inches, 100 grit
• Resin over resin industrial belts
• With open coat to resist loading
• Sharp aluminum oxide grains with heat resistant bond

Subjects:  1. Sanders    2. Belts   

Features

• From 3M, a world leader in hospital wound care products.
• Returns will not be honored on this closeout item

Reviews (1)

Good value - limited protection
I use these masks when I know that I will be creating fine sanding dust in my woodshop or when sanding drywall mud.They are fairly form fitting and shapable which makes them effective as well as comfortable to wear.What I like most about these masks is that they don't let a lot of heat/moisture build up inside (always uncomfortable) yet they do their job well.The only thing to keep in mind is that these are not meant to protect you from solvent fumes...just dust.

Because I can use one mask for several days, I find these to be a good value for the money.I highly recommend them to woodworkers. ... Read more

Subjects:  1. (Resperators)    2. (Dust Masks)    3. Masks    4. (Face Masks)    5. Painting Supplies    6. (Respiraters)    7. (Respirators)   

Features

• Better leveling with uniform finish, allow uni-directional sanding
• 3 by 24 inches, 60 grit
• P-grade regalite mineral construction
• Aggressive initial cut, consistent cut rate & long life
• Higher stock removal with less heat & loading

Subjects:  1. Sanders    2. Belts   

Features

• Better leveling with uniform finish, allows uni-directional sanding
• 3 by 24 inches, 100 grit
• P-grade regalite mineral construction
• Aggressive initial cut, consistent cut rate & long life
• Higher stock removal with less heat & loading

Subjects:  1. Sanders    2. Belts   

Features

• Roll carded in sharp cutter blade dispenser
• 49656: 3/4" x 60'

Subjects:  1. Electrical    2. Electrical Tape    3. (Electrician's Tape)   

Features

• Lightweight and comfortable
• Inexpensive, disposable
• Filters out non-toxic dusts, pollens
• Not recommended for sanding, grinding, insulating, powders, or spray paint particles. Customers who have a need for protection from these applications should use a government certified respirator.

Reviews (3)

wanted to give six but wasn't able to.
Hello my name is cornelius tinderwitt,I am a retired insurance adjusterand tend to spend most of my time gardening and avoiding the better half,although which half is debatable.anyway to make along story short I'verecently come into some money and have been in the market for a new pollenmask. It seems my dearly beloved( by who is any ones guess)mistook my oldone for a coffee filter , and ever since then I've had to postponere-tarring the roof. However I've just received my new mask in the mail andthe world has revealed to me its hidden pearl once again. Thank you 3M onceagain I am in your debt.

Essential for sanding, yardwork, etc
Allergies are a killer, especially in the spring when so many home-renewal projects hit. Clean up the yard? Do a little woodwork? Painting? Maybe you're blessed with a lack of allergies, but I for one am often impaired bythat sort of thing. So if you have to knock down the Scotch Broom that isinfesting the yard, or some other high-pollen-count invader... one of thesecan be quite handy.

Well put together and a solid product. Glad to seeAmazon carrying it.

Everyone needs some of these.
If you've ever worked in a dusty environment, these little dust pollen masks are just superb, and often necessary. If you work in either an enclosed environment where there is sawdust, sand, drywall compound dust(the worst), smoke, hair, these little babies can be life-savers. I keep afew in the glove box, just in case there's a fire nearby or I plan to dosome construction work.

These are, however, not good to be wearing ifyou are dining in an elegant restaurant or going to the opera. I have seenpeople cut little holes in them so they can smoke, though. This defeats thewhole purpose of the mask, as they are brilliantly designed to keep outparticulates and contaminants.

No doubt about it, everryone should havesome of these around, just in case. ... Read more

Subjects:  1. Painting Supplies    2. Masks    3. (Dust Masks)    4. (Face Masks)    5. (Respirators)    6. (Resperators)    7. (Respiraters)    8. Paint Removers   

Features

• Cotton backing, non-stretch, non-slip
• 3 by 24 inches, 50 grit
• Resin over resin industrial belts
• With open coat to resist loading
• Sharp aluminum oxide grains with heat resistant bond

Subjects:  1. Sanders    2. Belts