Features

• Long-lasting tungsten carbide cutting edges for use with tough materials
• Contains 15 bits in a wooden case

Subjects:  1. Bosch    2. (Bosh)   

Features

• 3 inch chisel for demolition hammer
• Wide chisel with two 60 degree, angles clean concrete, scale and rust
• Cuts troughs and some asphalt

Subjects:  1. Bosch    2. (Bosh)    3. Drill Bits    4. Round Shank Percussion Bits    5. (Drils)   

Features

• Non-ferrous metal
• 5 per pack for less downtime and more productivity
• 4-inch length for cutting non-ferrous metal
• 14 teeth for fast, smooth cuts
• Cut steel up to 3/8-inch for metalwork

Subjects:  1. Bosch    2. (Bosh)    3. Blades    4. Jig Saw Blades    5. Jig Saw Blade Sets    6. (Jigsaws)    7. Metal-Cutting Blades   

Features

• 10 per pack
• 1 1/2 by 12 inches
• 60 grit

Reviews (3)

No other source for belts.
Like the other reveiwers I have a problem with the durability of the belts. I burn through quite a few of these, we own 3 of these sanders, they are the best thing for touching up coped joints. Love the sander don't like the belts.
HEY BOSCH are you listening-

Belts are designed for light duty only
I have burned up all of the belts that came with the sander in just one day.I have used the sander at work to grind off flashing from polymer concrete castings (similar material to a cultured marble counter top.)I was able to get about 15 minutes out of each belt before they split and had to be discarded.

I don't recommend them for industrial use.They may be good for light duty sanding of wood and other soft materials but either way, the price is way too much for an expendable item.

break too often
these belts work OK when they work but of the first 6-8 I used, two broke as soon as I turned on the machine. If I could find another source, I would probably switch but so far I can't find this size belt in my town. ... Read more

Subjects:  1. Bosch    2. (Bosh)    3. Sanders    4. Belts   

Features

• Carbide tipped bit head is harder, tougher, and more resistant to extreme loads
• 5/8" diameter, 16" useable length, 21" overall length
• Four chiseling faces and cutting edges double the chiseling action for more efficient drilling

Subjects:  1. Bosch    2. (Bosh)    3. Drill Bits    4. SDS Shank Bits    5. (Drils)   

Features

• 135 degree split point starts on contact without walking or skating
• Speed helix design penetrates material three times faster than standard drill bits
• Black oxide coating lasts 50 percent longer than high speed steel drill bits
• Jobbers length bits in sizes 1/16" through 1/2" in 64ths

Subjects:  1. Bosch    2. (Bosh)    3. Drill Bits    4. Drill Bit Sets    5. (Drils)   

Features

• Moil point
• General chipping work
• 20 1/2 inch

Subjects:  1. Bosch    2. (Bosh)    3. Drill Bits    4. Round Shank Percussion Bits    5. (Drils)   

Features

• Fits Bosch model 11225VSRH Rotary Hammer
• 3.0 amp hours

Subjects:  1. Bosch    2. (Bosh)    3. Cordless Tools    4. Battery Packs    5. 24 Volt    6. (24 V)    7. (24V)    8. (V)   

Features

• Carbide tipped bit head is harder, tougher, and more resistant to extreme loads
• 1-1/2" diameter, 18" useable length, 23" overall length
• Four chiseling faces and cutting edges double the chiseling action for more efficient drilling

Subjects:  1. Bosch    2. (Bosh)    3. Drill Bits    4. SDS Shank Bits    5. (Drils)   

Features

• Compacts dirt, tamps asphalt
• Use with HS2126

Subjects:  1. Bosch    2. (Bosh)    3. Drill Bits    4. Hex Shank Drill Bits    5. (Drils)   

Features

• Titanium coating lasts six times longer than black oxide
• Unique Speed Helix flute design penetrates material three times faster than standard bits

Reviews (1)

Brittle, Bent and Expensive
This is an expensive set of drill bits, and indicated that they were of a high quality, but as it turns out I am not overly impressed. First I found the smaller bits extremely easy to snap, sure you have to be careful with smaller bits... but these broke easily. Then some others were just fine. The metal index box is almost as important to me as the bits since it is what allows me to make the correct selection in a fast and timely manner, as well as protecting the bits when not in use and allowing me to get the right bit back into the proper place for use next time.

While the sizing is fine, the box itself is nothing to get excited about, and if you drop it once count on the racks flying out of the box all over the shop floor. Again... something that would not be a big deal... but this is the top of the line and I thought I would get a little bit better box.

The final straw was when I used the 1/2" bit, the largest in the set and I was needing an extremely precise hole... and I didn't get it (seating a bearing) I took the bit out and it rolled across my tablesaw top and was as crooked as can be.

This was NOT caused by any fall, drop, or misuse. It was the first time I had used it, I was drilling into soft plastic, and this is a 1/2" piece of steel/titanium. I couldn't bend if I tried. I wish I could say that this was a good set, some of the bits ARE good, but no way I can say that it is worth the price. You might be able to overlook a problem here and there.. but not when you are buying for the very best you can get. ... Read more

Subjects:  1. Bosch    2. (Bosh)    3. Drill Bits    4. Drill Bit Sets    5. (Drils)   

Features

• Intermediate connection between breaker hammer and tamper plate or tent stake driver for pitching tents, tamping dirt and asphalt
• Tested for extreme durability through everyday use
• Designed for use with the and HS2126 demolition hammer, Bosch 6x6" tamper plate, tent stake drivers, and more
• 15-1/2 inches long for better reach and less operator fatigue

Subjects:  1. Bosch    2. (Bosh)    3. Drill Bits    4. Hex Shank Drill Bits    5. (Drils)   

Features

• Titanium coating lasts six times longer than black oxide
• Unique Speed Helix flute design penetrates material three times faster than standard bits

Subjects:  1. Bosch    2. (Bosh)    3. Drill Bits    4. Drill Bit Sets    5. (Drils)   

Features

• Carbide tipped bit head is harder, tougher, and more resistant to extreme loads
• 1/2" diameter, 18" useable length, 23" overall length

Subjects:  1. Bosch    2. (Bosh)    3. Drill Bits    4. Spline-Shank Bits    5. (Drils)   

Features

• Narrow chisel
• Starts holes in concrete slabs
• 20-1/2 inches

Subjects:  1. Bosch    2. (Bosh)    3. Drill Bits    4. Hex Shank Drill Bits    5. (Drils)   

Features

• Quick change bit system for fast, one-handed load and release
• Change bits without re-chucking

Subjects:  1. Bosch    2. (Bosh)    3. Drill Bits    4. Drill Bit Sets    5. (Drils)   

Features

• Accepts all 1/4-inch power hex shank accessories
• Quick-change bit system for fast, one-handed load and release
• Change bits without re-chucking for more productivity
• Eliminates looseness and wobble for fast and easy bit changes
• Fits all 3/8-inch and 1/2-inch drills for dual-use versatility

Subjects:  1. Bosch    2. (Bosh)    3. Drill Bits    4. Drill Bit Sets    5. (Drils)   

Subjects:  1. Bosch    2. (Bosh)   

Features

• Carbide tipped bit head is harder, tougher, and more resistant to extreme loads
• 1/2" diameter, 11" useable length, 16" overall length

Subjects:  1. Bosch    2. (Bosh)    3. Drill Bits    4. Spline-Shank Bits    5. (Drils)   

Features

• Set includes two each of T101B, T119BO, T144D, T118A, and T118B jig saw blades
• T-Shank jig saw blades fit the following brand jig saws: Bosch, DeWalt, Hitachi, Makita, Milwaukee, Metabo, PorterCable and Craftsman.

Reviews (1)

The blades earn a 5, the assortment earns a 4...
In my humble opinion, Bosch makes great jigsaws and great jigsaw blades.I bought this kit right after I got my Bosch barrel grip jigsaw, thinking that a good assortment was just the key.Its now several years later and I long ago used, dulled, and discarded the blades from this set that suit my type of work and the rest sit collecting dust.

My advice is:buy Bosch blades, but only buy a couple at a time until you know which sizes suit you and/or the style of work you do most.Then you can buy larger quantities of just those sizes!

... Read more

Subjects:  1. Bosch    2. (Bosh)    3. Blades    4. Jig Saw Blades    5. Jig Saw Blade Sets    6. (Jigsaws)