Features

• 12" width requires less moving of the tool rest base
• Provides support for turning tools, allowing safer, more controlled operation
• Cast-iron construction for durability and vibration resistance
• Fits 1" diameter tool rest mounting holes

Reviews (1)

WHAT IS THE SIZE OF THE SHANK? 5/8 OR 1 INCH
i NEED A 5/8 INCH TOOLE REST. THIS ITEM MAY MMET MY NEEDS IF THE SHANK IS THE CORRECT SIZE.
THE ITME DESCRIPTION DOES NOT STATE THE SIZE. ... Read more

Features

• Two-year limited warranty on machines, parts, and accessories
• Adds roll-away portability to Delta 37-380 8-inch Jointer
• Steel construction for durability
• Foot-operated lever provides easy raising and lowering of base
• Inside dimensions 17 by 27 inches for a custom fit

Reviews (1)

A Much Needed Accesory
Unless you have a large shop where you will never need to move your jointer, you need this item, the rack and pinion on the fence takes a bit of room.I was a bit hesatant due to the price but I am glad I purchased it.The Jointer is now easy to relocate, a single step on the pedal and one hand is all that is needed. With the pedal up it is as solid as if it were on the floor. ... Read more

Subjects:  1. Mobile Bases    2. Jointers   

Features

• 23.75 inches x 11.75 inches x 2.0 inches
• Replacement three-pocket inner filterfor 50-868 Air Cleaner
• Easy, tool-free installation for quick replacement
• Filters particles down to 1 micron for a cleaner, healthier work environment
• One filter per package

Subjects:  1. Vacuums    2. Dust Collectors    3. Filters    4. (Vacumes)    5. (Vaccuums)    6. (Vaccums)    7. (Vacums)   

Features

• Deflects chips and debris for an added measure of safety
• Adjustable for proper positioning
• Fits drill presses with columns between 1-1/2" and 3-11/16" diameter
• Includes mounting hardware

Subjects:  1. Safety Equipment    2. Eye Protection    3. (Goggles)    4. (Glasses)   

Features

• "Dresses" grinding wheel to provide a clean, fresh, square surface
• Keeps wheel conditioned for peak performance and consistent results

Subjects:  1. Jigs    2. Honing Jigs    3. Hand Tools    4. Sharpening Stones   

Features

• 1-1/2-inch diameter for sanding medium-sized curves and contours
• Aluminum oxide abrasive for long lasting, efficient sanding
• 80 grit for aggressive sanding action
• 6 pack

Subjects:  1. Sanders    2. Sleeves    3. Sand Paper    4. (Sandpaper)   

Features

• Fits Delta 43-505 router/shaper table
• Trimmable for a custom fit to the bit or cutter for reduced chipping and splintering
• Constructed from plastic for easy trimming, will not damage cutters
• Fits cutters from 1/2- to 2-7/8" in diameter
• Replaces standard insert

Subjects:  1. Shapers    2. Shaper Attachments   

Features

• Fits Delta 40-530, 40-540, and 40-560 Scroll Saws to convert to floor stand models
• Mounts saw at a comfortable working height for easier use
• Pre-drilled for easy mounting of saw
• Simple, bolt-together assembly for easy set up

Subjects:  1. Stands    2. Saw Stands    3. Scroll Saws    4. (Scrollsaws)   

Features

• Fits Delta 37-350 DJ-20 Jointer and 37-380 Professional Jointer
• High-speed steel construction for sharpness
• 3-pack

Reviews (1)

Delta Knock-off's
I ordered the Delta 37-365X Jointer and a set of knives for back up. When the knives arived, they were not in a Delta box and Delta's name/part number was not printed on the knives. I call Amazon and requested a second set, no-luck, same set was sent again. I returned the knives, and ordered a set from Delta direct. I feel, to keep equpment running safe and trouble free, buy orgenal parts only, not copies. ... Read more

Subjects:  1. Jointers    2. Knives    3. (Knife)    4. Blades   

Features

• Increase the safety of jointing operations
• Molded handle provides comfortable grip
• Rubber bottom pad grips workpiece surface

Subjects:  1. Jigs    2. Featherboards    3. (Feather Boards)    4. Jointers    5. Jointer Attachments   

Features

• Fits Delta 31-695 and 31-280 sanders and others requiring a 6-by-48-inch sanding belt
• Aluminum oxide abrasive for long lasting, efficient sanding
• 120 grit for efficient stock removal with a finer finish

Subjects:  1. Sanders    2. Belts   

Features

• 1-inch diameter for sanding small curves and contours
• Aluminum oxide abrasive for long lasting, efficient sanding
• 120 grit for efficient sanding with finer finish
• 6 pack

Subjects:  1. Sanders    2. Sleeves    3. Sand Paper    4. (Sandpaper)   

Features

• Fits Delta mortising attachments and mortising machine
• Drills 1/4" square holes for making mortise and tenon joints
• Center drill bit removes material, hollow chisel squares off the sides
• Two-piece design for easy re-sharpening
• High quality steel for durabilty and sharpness

Subjects:  1. Drill Presses    2. Mortisers    3. (Drils)    4. (Mortise)    5. (Mortising Machines)   

Features

• 36 Grit
• Pre-cut to proper length for replacing abrasives on 31-250 wide drum sander
• Four per package

Subjects:  1. Sanders    2. Drum Sanders   

Features

• 6" diameter for small and medium face plate turnings
• 1"/8 left and right hand threads fit standard headstocks
• Pre-drilled holes for mounting the workpiece
• Cast iron for durability and vibration resistance

Reviews (1)

Great plate for turning.
I have used these plates for turning wood bowls in the past, and I have found nothing that I like better. I successfully turned an 18 inch oak bowl by mounting it onto this base plate. (I have to admit I was surprised at how beautiful it turned out, since it was my second major attempt at turning bowls)

I STRONGLY recommend purchasing this plate if you are planning on doing any serious bowl turning, since if you use a smaller plate the bowl may become detached when you apply pressure with the chisels, leaving you with a waste of time rather than a piece of art.

Good luck turning! ... Read more

Features

• Drills 1/2" square holes for making mortise and tenon joints
• Center drill bit removes material, hollow chisel squares off the sides
• Two-piece design for easy re-sharpening
• Fits Delta mortising attachments and mortising machine

Reviews (2)

Am I missing something?
I bought this chisel and bit as part of a four piece set and have been happily using it for nearly five years now.I have read in many places that inexpensive chisel and bit sets like this one provide inferior cuts and can dull quickly.That has not been my experience at all.With an accurate setup, I have used this tool to cut perfect mortises in red oak, quartersawn white oak, white pine, and southern yellow pine with no problems whatsoever.Granted, the chisels do get hot during extended use and I am dilligent about letting them cool if they are about to overheat - but I could not be happier with the performance of this set.At this price and with that quality, you cannot go wrong!

THE CHEAPEST MORTISING CHISEL .
I am using the above tool for years now.I have purchased so many pcs which brakes after short period of use.After usingDELTA 17-783 1/2" SET OF MORTISING CHISEL AND BIT I found it is good in quality and I gives it 5 stars for its cheap price.I feel my problem is solved. ... Read more

Subjects:  1. Drill Presses    2. Mortisers    3. (Drils)    4. (Mortise)    5. (Mortising Machines)   

Features

• Ruggedly constructed of 9-ply Finland Birch and high impact laminates that are hand fitted to solid steel angle iron and tubing for years of use
• Standard 28" right cutting capacities with 8" of left capacity
• Biesemeyer Fence system feature mounting holes for a variety of manufactures' table saws
• Includes two year limited warranty on parts and accessories

Subjects:  1. Saws    2. Table Saws    3. Table Saw Attachments    4. (Tablesaws)   

Features

• Fits Delta 31-695 and 31-280 sanders and others requiring a 6-by-48-inch sanding belt
• Aluminum oxide abrasive for long lasting, efficient sanding
• 100 grit for efficient stock removal with a finer finish

Subjects:  1. Sanders    2. Belts   

Features

• All-in-one design for convenient changing from shaper cutters to router bits
• Accepts 1/2" bore shaper cutters and 1/4-and 1/2" router bits
• Includes wrenches
• Fits Delta 43-355 wood shaper

Reviews (1)

Better than buying an expensive router table!
If you already have the Delta Shaper this stub spindle fits
(43.355) then you're already half way there!This item lets you use both 1/2" spindle shaper cutters and 1/4" or 1/2" router bits
Fit and finish of the accessory was very, very good.No idea if it is made offshore, but given Delta's track record the last few years it wouldn't surprise me.Nonetheless, it it a well made accessory and given the amount of machining to make it the price
Amazon charges is quite reasonable.

The stability and usability of the Delta shaper is far superior
to any router table setup I've seen yet.This accessory will let
you leverage your collection of router bits and avoid the high cost of seldom used shaper cutters.

Amazon was a little slower than usual getting me this item, but
then hardly any other online tool source could even order it!Kudos to Amazon for getting me this fine addition to my tool collection. ... Read more

Subjects:  1. Shapers    2. Shaper Attachments   

Features

• 5 micron replacement bag for model 50-840 dust collector
• Provides maximum filtration of airborne particles
• Traps particles down to 5-microns
• Can be used for top or bottom bag replacement

Subjects:  1. Vacuums    2. Dust Collectors    3. Dust Bags    4. (Vacumes)    5. (Vaccuums)    6. (Vaccums)    7. (Vacums)