Features

• 15" blade
• Triple Chip tooth design
• 110 carbide teeth
• Aluminum cutting
• 1" Arbor

Subjects:  1. Blades    2. Circular Saw Blades   

Features

• Dado insert for Hitachi model C10RA2 10-inch portable table saw

Subjects:  1. Blades    2. Table Saw Blades    3. Dado    4. (Tablesaws)    5. Saws    6. Table Saws    7. Table Saw Attachments   

Features

• 1-1/4-inch
• 15-gauge finish nails
• Bright
• 4,000 count
• Fits NT65MA and NT65MA2

Subjects:  1. Hardware    2. Fasteners    3. Nails    4. Collated Nails    5. Finish Nails    6. (Colated)   

Features

• Fits NR90AC2
• 3 1/2" x .162
• Brite
• 3m Count
• Plastic Strip

Subjects:  1. Hardware    2. Fasteners    3. Nails    4. Collated Nails    5. Framing Nails    6. (Colated)   

Features

• Aligns the material with the saw fence
• For working with wider materials and higher miter and bevel degree settings
• Improves cutting accuracy and safety
• Vise clamp assembly for the Hitachi C8FB2 8-1/2-inch slide compound saw

Reviews (2)

An Absolute Must Have!
Due to the smalish size of the Hitachi saw bed and fence, this vice clamp is a must, not only for cutting accuracy, but also for safety. There is a slight potential for kick-back when cutting wide material with the sliding-mitre saw so you definitely want your 'holding hand' out of the way! The assembly is a definite must for keeping the work lined up with the saw fence once you've started the cut, especially with wide material and/or the greater mitre/bevel degree settings.

An Absolute Must Have!
Due to the smalish size of the Hitachi saw bed and fence, this vice clamp is a must, not only for cutting accuracy, but also for safety. There is a slight potential for kick-back when cutting wide material with the sliding-mitre saw so you definitely want your 'holding hand' out of the way! The assembly is a definite must for keeping the work lined up with the saw fence once you've started the cut, especially with wide material and/or the greater mitre/bevel degree settings. ... Read more

Subjects:  1. Saws    2. Miter Saws    3. Miter Saw Attachments    4. (Mitre Saws)    5. (Mitersaws)    6. (Mitresaws)   

Features

• 15 guage finish nails
• Bright
• 4m Count
• Fits NT65MA & NT65MA2

Subjects:  1. Hardware    2. Fasteners    3. Nails    4. Collated Nails    5. Finish Nails    6. (Colated)   

Features

• Parallel guide for model NOS C7SB, C7BD, and C8

Subjects:  1. Fences    2. Circular Saw Fences   

Features

• BIM
• Demolition
• 6 TPI
• 3 pack

Subjects:  1. Blades    2. Reciprocating Saw Blades    3. Multipurpose Cutting Blades    4. (Sawzalls)    5. (Sawsalls)    6. (Recipracating)   

Features

• 6-inch jointer blade set

Subjects:  1. Jointers    2. Knives    3. (Knife)    4. Blades   

Features

• 2 1/2"
• 16 guage finish nails
• 2.5m count
• Bright
• Fits NT65A,NT65A2,NT65A3

Subjects:  1. Hardware    2. Fasteners    3. Nails    4. Collated Nails    5. Finish Nails    6. (Colated)   

Features

• 1 1/2"
• 16 guage finish nails
• 2.5m count
• Bright
• Fits NT65A,NT65A2,NT65A3

Subjects:  1. Hardware    2. Fasteners    3. Nails    4. Collated Nails    5. Finish Nails    6. (Colated)   

Features

• 2", 16 gauge finish nails
• 2.5m count
• Fits Hitachi NT65A,NT65A2,NT65A3 finish nailers

Subjects:  1. Hardware    2. Fasteners    3. Nails    4. Collated Nails    5. Finish Nails    6. (Colated)   

Features

• 3/4"
• 18 guage
• 5m count
• Electro Galv
• Fits NT50AE & NT32AE

Subjects:  1. Hardware    2. Fasteners    3. Nails    4. Collated Nails    5. Brad Nails    6. (Colated)   

Features

• 1 1/4"
• 18 guage
• 5m count
• Electro Galv
• Fits NT50AE

Subjects:  1. Hardware    2. Fasteners    3. Nails    4. Collated Nails    5. Brad Nails    6. (Colated)   

Features

• Set of two 12-inch blades
• For models P12R or P12RA

Reviews (3)

these are not carbide
Given a set of carbides are over [$$$] you can assume these are steel.The steel is useful for certain applications like recycling wood where you dont want a nail to shatter your carbides.Sharpening steel is about [$$]a pop, so you do the math for your needs.Given I do a lot of recyling of softwoods, the steel works fine.I rotate two sets.If you want carbide the Hitachi part number is 200001.Call a local dealer.

Carbide PLEASE!
I am very glad I bought carbide blades when I bought this unit, since they seem impossible to find now. I have had a notify request in to Amazon/ToolCrib for over a year, never got any information, and they long ago seem to have removed the carbide blade item from the site. This unit NEEDS carbide blades for the planer. Without them, the unit is relatively useless on anything harder than fresh yellow pine. Old wood, ash, oak and the like require carbide or this machine simply folds the edge of the steel knives. while they can be resharpened, they are relatively useless compared to carbide blades. The planer is great, the steel blades are a waste of time.

hss
If these are the same as the stock blades no thanks. I'm looking for carbide cutters for the p12ra Hitachi,the 972011 12" Planer Blade Set dose not specify. So I guess it is safe to assume they are high speed steel. ... Read more

Subjects:  1. Planers    2. Knives    3. Knife    4. Blades    5. (Planners)    6. (Plainers)    7. (Surface Planers)   

Reviews (1)

Too Short a fence
I own the Hitachi C10FS sliding compound miter saw.I love the saw but hate the fence.It is too low for easy and uncomplicated cutting of crown molding.You have to have a good knowledge of the angles you need to cut inside or outside crown molding corners.With a taller fence you can set the molding in an installed position and then just cut a 45 degree angle.Once again, the saw itself is great. ... Read more

Subjects:  1. Fences    2. Miter Saw Fences    3. (Mitre Saws)    4. (Mitersaws)    5. (Mitresaws)   

Features

• 1-1/4-inch nails
• 2800 nails & caps per box
• Ring shank

Reviews (1)

Time Is Money!
With out a doubt this in assocation with Hitachi's
speedy cap gun will increase your companies profit poteniial the first day you put them to use. What was once a days work smashing finger after finger trying to dry in your roofs in harsh winds can now be compleeted in a quarter of the time with half of the people. This product is a must for any professional roofer. Well worth the cost!! ... Read more

Subjects:  1. Fasteners    2. Collated Nails    3. Roofing Nails    4. (Colated)   

Features

• Fits SuperDrive
• 2 1/2" Collated Deck screw
• LOX drive
• 1000 hr dacro

Subjects:  1. Fasteners    2. Collated Screws    3. Specialty Screws    4. (Colated)   

Features

• Fits SuperDrive
• 3" collated deck screw
• LOX drive
• 1000 hr dacro

Subjects:  1. Fasteners    2. Collated Screws    3. Specialty Screws    4. (Colated)   

Features

• Fits SuperDrive
• 1 3/4" Stabber sub-floor collated screw
• LOX drive
• Yellow zinc

Subjects:  1. Fasteners    2. Collated Screws    3. Specialty Screws    4. (Colated)