 | Bosch HS2169 5-1/2" x 20" Clay Spade
list: $106.02 - our price: $66.39
by Bosch
Tools & Hardware
(1 reviews) 
Customer Review: A Spade for a KING: Having owned many spades in my life I can safely say this one is the greyest one that I've had. Usually I go for the green ones, |
 | Bosch HS2173 Tamper Shank
list: $61.14 - our price: $39.99
by Bosch
Tools & Hardware
|
 | Bosch JA1002 Anti-Splintering Inserts (5-Pack)
list: $2.98 - our price: $3.10
by BOSCH (S-B Powertools)
Tools & Hardware
(2 reviews) 
Customer Review: They stop splintering, but so does fine tooth blades: I thought that since they were clear plastic, they would do the job, and not get in the way of being able to see the line. |
 | Bosch JA1003 Circular & Parallel Cutting Guide
list: $15.06 - our price: $14.99
by Bosch
Tools & Hardware
(5 reviews) 
Customer Review: Just plain JUNK: While my Bosch 1587 is quality made and the Bosch saw blades are the best I have used, the optional JA1003 Cutting Guide is a [X] piece of junk. |
 | Bosch Metal and Woodworking Blades (30-Pack)
list: $40.50 - our price: $29.99
by Bosch
Tools & Hardware
(6 reviews)
Customer Review: Good for most, but not all, applications.: This is a good assortment of blades from Bosch. They are quite sharp and last a good long time under most conditions. |
 | Bosch PC11PCM 12-Piece Power Change Master Bi-Metal Hole Saw Set
list: $156.05 - our price: $71.99
by Bosch
Tools & Hardware
(1 reviews)
Customer Review: Excellent design and value: If you don't want to spend over $250 for a set of carbide hole saws, then this is as good as it gets at a fraction of a carbide set's price. |
 | Bosch RA1054 Deluxe Router Guide
list: $58.33 - our price: $31.99
by Bosch
Tools & Hardware
(5 reviews) 
Customer Review: Very accurate tool: Just made a large fluted column with the guide, and it worked very well. The tool has a very large adjustable edge guide for stable contact with the wood edge. |
 | Bosch RA1166 Router Plunge Base
list: $156.00 - our price: $87.99
by Bosch
Tools & Hardware
(1 reviews)
Customer Review: Upgrade your fixed based to a plunge router: I purchased the Bosch fixed based router last fall before the combo kit came out. I eventually mounted the fixed base to my home built router table. |
 | Bosch RA1180 Benchtop Router Table
list: $421.06 - our price: $199.99
by Bosch
Tools & Hardware
(22 reviews)
Customer Review: Patience pays off.: It took me about 8 hours to assemble this table properly. I needed that much time as I'm a perfectionist. :-) All said and done, |
 | Bosch RA1200 Deluxe Router Table
list: $642.12 - our price: $279.99
by Bosch
Tools & Hardware
(31 January, 2001)
(4 reviews)
Customer Review: Great portability, poor precision: I must admit, I didn't buy this from Amazon. I got mine from Woodworker's Warehouse when they were going out of business. |
 | Bosch T101B 4" 10-Tooth T-Shank Jig Saw Blades (5-Pack)
list: $8.60 - our price: $7.99
by Bosch
Tools & Hardware
(1 reviews)
Customer Review: The Best Jigsaw Blades: For anyone who isn't sure which jigsaw blade to buy, the 101B is the absolute best blade for almost all woodcutting in wood under 1 1/4" thick. |
 | Bosch T101D 4" 6-Tooth T-Shank Jig Saw Blades (5-Pack)
list: $8.60 - our price: $7.99
by Bosch
Tools & Hardware
(2 reviews)
Customer Review: These are scary sharp: The swiss make great knives and jig saw blades! :-) These Bosch blades are swiss made. It is stamped on the side. |
 | Bosch T118A 3" 24-Tooth Jig Saw Blades (5-Pack)
list: $7.88 - our price: $7.49
by Bosch
Tools & Hardware
(2 reviews)
Customer Review: Great blades for sheet metal: These blades go great in my Bosch Progressor jig saw when its time to cut sheet metal. For this job, |
 | Bosch T123X Progressor Metal Blade (5-Pack)
list: $10.88 - our price: $10.49
by Bosch
Tools & Hardware
(2 reviews) 
Customer Review: Great for the first few cuts, but then . . . .: The first time I put these blades in my BOSCH jig saw, I thought how wonderful it was that BOSCH had created a blade that cut quickly, |
 | Bosch TS1000 Portable Folding Stand
list: $164.60 - our price: $95.99
by Bosch
Tools & Hardware
(1 reviews)
Customer Review: Ripper's last stand: I am a trim carpenter and need to move my stuff around a lot.Over the years, I have tried several job site table saw arrangments ranging from working on my knees on the floor to various cobbled up home made rigs, |
 | Bosch TS1001 Fixed Steel Stand
list: $62.64 - our price: $39.99
by S-B Power Tool Company
Tools & Hardware
|
 | Bosch TS1002 Rear Outfeed Support Extension
list: $38.92 - our price: $27.99
by Bosch
Tools & Hardware
(1 reviews)
Customer Review: outfeed support: The outfeed support is a handy thing to have on a table saw. The only problem that I have encountered in useing it is that flexible materials like thin plywood tend to flex between the saw and the outfeed support and hit the support instead of going on top of it. |
 | Bosch TS1003 Left Side Support Extension
list: $28.24 - our price: $29.99
by Bosch
Tools & Hardware
(5 reviews)
Customer Review: Close to a Must Have: The Left Side Support extension is everything it is supposed to be. Solid, heavy, a good general fit, and with thoughful design features which make it a 'natural'accessory. |
 | Bosch TS1004 Dust Collector
list: $14.92 - our price: $10.99
by Bosch
Tools & Hardware
(3 reviews)
Customer Review: Not worth the price: Not worth the price you ask? It's only $11.00. True. Don't waste your $11.00. Instead plug a shop vac into the exhaust port of the table saw. |
 | Bosch TS1009 Molding Head Insert
list: $14.96 - our price: $10.99
by Bosch
Tools & Hardware
|
 | Factory-Reconditioned Bosch 3107DVS-46 5" Dustless Random Orbit Sander/Polisher
list: $130.00 - our price: $59.99
by Bosch - Reconditioned
Tools & Hardware
(1 reviews)
Customer Review: Great Sander - superior dust collection - bargain price!: Having been VERY disappointed with the performance and long-term quality of the Black & |
 | Factory-Reconditioned Bosch 3365-46 3-1/4" Power Planer
list: $191.75 - our price: $89.99
by Bosch - Reconditioned
Tools & Hardware
(1 reviews)
Customer Review: Great deal on a planer: I have used this planer primarily on doors in my house. In particular, I've found it long enough to get the start and end of the edge planed without "clipping" the edge. |
|
