Features

• Large gauges provide a clear view of both tank and regulated air pressure
• Honda 5.5HP engine with oil alert which protects engine in low oil situations
• Oil lubricated pump with cast iron cylinder for extreme durability
• Full roll cage protection for extreme job site durability
• Innovative, integrated control panel for the ultimate in user convenience

Subjects:  1. Air Compressors    2. Oil-Lube Compressors    3. Wheelbarrow    4. (Wheel Barrow)    5. (Compresors)    6. (Compressers)   

Features

• Hardened steel nose piece
• Rugged portable designed for performance
• Magnetic nose piece to hold nail in place
• Includes: Leather glove, two hardened nose pieces, oil, O-rings, and service tools
• Convenient carrying case

Reviews (2)

Great Nailer!
I have just begun a 2000 sq. ft. addition on my home. This nailer is the perfect tool for nailing all the joist hangers. I have a lot of engineered lumber in my design and trying to drive a nail by hand into a microlam beam is very difficult. I have framing nailers but they are too big to get in between the rafters at times.

The tool has a good feel and weight. Very comfortable. I drove over 200 nails the first day I used it and it never malfuctioned once. The glove keeps the tool where it needs to be and there is very limited recoil so it doesn't bother your hand at all.

I would recomend this nailer to anyone who does even the smallest amount of construction or home inprovement. In fact I have a second one on order for a Christmas gift for my 68 year old father who fell in love with it the first time he used it.

Pneumatic Palm Nailer
I recently retired and have undertaken a project to build a woodworking shop-garage.Swinging a hammer has become a very tiresome chore, and I was considering the purchase of a framing nailer.Upon reviewing information from various manufacturers, I realized that a framing nailer is a very specialized tool.
However, I happened to run across information about palm nailers. In reviewing the information provided by Amazon, I read that a palm nailer can be used for nailing any size nail and in many different applications. I could see where this would be a more useful tool than a framing nailer.I purchased the Bostitch PN100 kit, and immediately started using it with 16d nails in framing my new shop. I then used 10d nails in decking the roof. All I can say is this nailer is wonderful!!It drives nails quickly, at any angle, and in a limited amount of space. You do have to be careful to make sure that the alignment of the nail with the nailer is correct; if not, bent nails will result. However, with just a little practice, nailing becomes an effortless operation. I would recommend this as a general purpose nailer to anyone.I might also add that I own a brad nailer and a roofing nailer made by Porter Cable, and a 1/4 inch crown stapler, and the Bostitch nailer works as well as any of them. ... Read more

Subjects:  1. Air Tools    2. Nailers    3. Framing Nailers    4. (Nail Guns)    5. (Nailguns)    6. Cordless Tools    7. (Nail Gun)    8. (Nailgun)   

Features

• 1/4-inch staple
• 5,000 per box

Subjects:  1. Fasteners    2. Staples    3. Finish Staples    4. (Stapels)   

Features

• Solid steel, multi-directional exhaust cap
• Increased power for better driving of staples into hardwood applications
• Jam-Free magazine
• Molded rubber comfort grip designed to last longer
• Longer, narrower nose for increased visibility and ease in stapling corner blocks

Features

• Combo pack includes a 1-5/8-inch brad nailer
• 1000 1-5/8" brad nails, tool oil, tool carrying case
• 1.5-HP, 5.8-gallon oil-less compressor with wheels for portability
• Kit also comes with a 25-foot airline kit with all fittings and Teflon tape

Reviews (8)

broken compressor no help to fix it
Hi T.W.IT M.C.Ibought this compressor combo kit at a local dealer and when it broke no wants to touch it or have any parts for it.How can I repair my tools!!!!!!!!!!!!!!!

Bostitch Cpack 100 Great Deal
I purchased the Bostitch CPACK100 from Amazon and it is an amazing kit. I like the compressor because of it's quick recovery and portability. The brad nailer will nail oak trim with no problem. The compressor also has plenty of power to use with a framing nailer and finish nailer. It's a great product!

So Far So Good
I received my combo last week and used it for about 6 hours so far. I have used the compressor with the brad nailer and a Bostitch angle finish gun. So far it works beautifully. I had a jam in the finish nailer...no problem to clear. The brad nailer has been flawless so far. What I will say is that the directions for the compressor aren't worth the paper they are printed on. If you buy this compressor: The large gauge measures the pressure in the tank, the motor will cut off at 120 psi. The small gauge measures the psi delivered to the tool. Pull up the red cap and adjust the outflow until it meets the psi you need, then push the cap down to lock. To drain or release pressure the valve is on the bottom. The hose and connections are self explanatory.

Overall I'm very happy so far for the price you can't go wrong. ... Read more

Subjects:  1. Air Tools    2. Combo Packs   

Features

• Cushioned non-slip grip and a squeeze mechanism requiring less pressure to operate
• Staples, nails, plus fastens screen doors and windows, tacks cabling, and is strong enough to take on upholstering chores
• Shoots: 1/4, 5/16, 3/8, 1/2, and 9/16-inch staples
• Shoots: 1/2 and 5/8-inch brad nails
• Hi/lo power switch that drives the fasteners to exactly the right depth

Reviews (5)

Worst staple gun ever
After several repairs, numerous cleanings (sand), and weeks of trying to install 1000+ sf of insulation in a crawl space the staple gun had to be replaced. Several years of former Stanley products is now wrapped up in the nightmare of this staple gun.

Stanley ProSharp Shooter Broke in one year.
I bought a Stanley ProSharp Shooter TR200. And with in one year it broke. I don't use it that much so I would like to know if someone has had that problem. And if you can tell me who tocontact on line to have it repaired. Thank You Jack

The supplies are available....
A fine product for upholstery and framing. The TR200 uses both Stanley Sharpshooter TRAand Arrow T-50 supplies.
I searched Google using Sharpshooter TRA and located suppliers for the Stanley fasteners.
I searched Google using Arrow T-50 and found several suppliers of fasteners.My local Home Depot has Arrow T-50 staples that worked just fine. ... Read more

Subjects:  1. Hand Tools   

Features

• No mar tip
• Oil free
• Lightweight magnesium housing
• Ultra quiet rear exhaust
• Adjustable depth control

Reviews (9)

doing your research
I bought this stapler for general projects and am very happy with the stapler itself. It has always worked very well. I like the oilless feature and the power it has. My caution for anyone thinking about buying this item is the availability of the shorter 1/2 inch and 5/8 inch staples. In my area I went to Home Depot, Lowes and Menards all of which sell the stapler but do not stock the short staples. I wanted them to do an upholstery project. I found them on the net but this delayed the project until the staples arrived in the mail. That is my only warning about buying this or any other tool is make sure they stock the full range of fasteners that can be used with it.

Needs improvement
This product has worked quite well for me, but a key feature broke, making is almost obsolete.I had to staple hail screen (hardware cloth) to a wooden frame.This required placing the safety mechanism (at the tip) on the screen and firing a staple.When the tip was wide it was not difficult.However, the tip is PLASTIC and it wore through after about 20 hours of work.The metal is very narrow, and was difficult to place on the screen to fire a staple.Consider selecting a stapler that has an all metal safety tip.This part is available from the Stanley/Bostitch website for $0.15, but shipping is $7.00!!!

So far so good
My old narrow crown went down the other day so I bought this at a home improvement warehouse. I usually check to see which is made in the USA first, then durability, then price. This was the only gun in it's price range made in the USA. I use it in case openings, drawerstock and drawer bottoms, built-in backs, or anything thin. (...) Depth of drive adjustment is good, rear exhaust is great,I have always hated the "blow in your face," weight is good, also no oil is a blessing ... no mar. It is so light it feels like plastic, but it is magnesium. I liked the automatic feature..as long as the safety is down, it will fire till you run out of stock. I wish it wouldn't fire without staples though..If I could I would deduct a half star for that.It had the power to consistantly sink 1" staples, butdon't know about 1 1/2". It took more than a thousandstaples without a hitch building columns...no pretzels. so far so good ... Read more

Subjects:  1. Air Tools    2. Staplers    3. Construction Staplers    4. (Staple Guns)   

Features

• Free H30-8 hammer stapler in the box (limited time offer)
• Patented single-action side load canister for fast nail loading
• Adjustable exhaust deflector
• Shingle gauge for fast layouts
• Vinyl siding and insulation board adapters available

Reviews (3)

nailer
This has been a very reliable nailer for me.It make easy work of putting on a roof.It is light weight, and nails quickly.

Well made and good deal but
The Bostitch appears well made and it is a good deal with the included stapler.It will drive 1 3/4 nails easily although in cold weather it is necessary to increase the pressure to 100 psi.So far I have only nailed one square of shingles, but it has already misfired once - not a good sign.The misfire was due to a misfeed but did not seem to be a nail problem since I was using Bostitch brand 1 1/4 nails (not generics).

Great combo
The nailgun is as good as everyone says, and the Hammer Stapler is a great addition.It works fine for quickly tacking on felt, housewrap, vapor barriers, etc.Not a bad deal! ... Read more

Subjects:  1. Air Tools    2. Nailers    3. Roofing Nailers    4. (Nail Guns)    5. (Nailguns)   

Features

• Pistol Grip Blow Gun
• 3/8" x 50' Heavy Duty PVC
• 1 MPT 1/4" Quick Connect Coupling, 1 FPT 1/4" Quick Connect Coupling, 1 FPT 1/4" Quick Connect Plug, 1 MPT 1/4" Quick Connect Plug
• Teflon tape
• Pneumatic tool lubricant

Features

• No mar tip
• Oil free
• Lightweight magnesium housing
• Ultra quiet rear exhaust
• Adjustable depth control

Subjects:  1. Air Tools    2. Nailers    3. Brad Nailers    4. (Nail Guns)    5. (Nailguns)   

Editorial Review

A popular model with framers, this Bostich stick framing nailer offers solid, no-fuss, reliable performance. With an aluminum housing and extruded aluminum magazine, it's a tough piece of equipment, designed to hold up to falls and the inevitable beating things take on a job site. Features include aggressive teeth that easily grip lumber (for toe-nailing), adjustable depth control, and a deflector that conveniently directs exhaust away from the user. We were impressed with how solid the whole unit feels--it definitely has the burliness of an industrial-strength tool. But with its burly nature comes a bit of extra weight--always something to consider.The tool weighs just over 8 pounds empty, so some arm fatigue is probably inevitable. But the nailer's rubber grips are comfortable to hold, and the balance is good. This model shoots 2- to 3-1/2-inch, 21-degree, plastic-collated, full-head nails, and will hold up to 75 nails at a time. This model is also available in contact or sequential trip. --Jonathon Tudor ... Read more

Features

• Multidirectional exhaust and a comfort grip
• Designed for fast loading of two nail clips with no adjustments
• Angled magazine for accurate toe nailing
• Lightweight -- only 9.1 pounds
• Used for framing sheathing, roof decking, and subflooring

Reviews (7)

Great Gun
By far the best nailer I have ever used. Somtimes hard to find nails, but a can't miss nailer.

A tank!
This thing is a tank. I bought one used years ago. It now has all of the paint worn off , and does not owe me a penny. It has never mis-fired, mis-fed jammed or leaked air. Just done it's job without missing a beat. It has had every brand of full head nails, and will feed them all. It even fed half a clip of d-heads once in a moment of desperation. Go figure. They are heavier ( by a lot!) than some of the newer guns and simpler. They do not have a 'lock out' for the last nail and will dry fire. Do not have the jam clear nose.But I can give one to a helper, and know there will be a greater chance ( some find a way) he will be able to do the job without shooting himself, someone else ( mine is sequential fire only, no bump fire and will not double shoot) or killing it ( two story drop, throw in dirt etc). And after he has finished abusing it, the next time I pick it up, it will still work!

Good Nailer for Cost
This is my first nailer although I have used Paslode, DuoFast and Senco as well.I understood going in the 800 lb force would not produce the same results as the higher priced models.I have found the nailer to work in all materials (although I have only used it for a couple of hundred nails), hardwood, softwood and even pressure treated. No jams as of yet and the nailer does drive nails completely into wood as long as you have it seated properly on the piece you are nailing.I must also add that I have the adjustment set for the deepest setting.I have used 8, 10, and 12 penny nails so far.No problem finding nails at Home Depot. ... Read more

Subjects:  1. Air Tools    2. Nailers    3. Framing Nailers    4. (Nail Guns)    5. (Nailguns)   

Features

• Easy one-step loading
• Lightweight--only 5.96 pounds
• Shingle placement guide
• Comfort-grip handle
• Carbide-steel contact parts

Reviews (8)

A very good gun.
This gun worked very good 30 square and no jams. I know that is not a lot of shingles but that is not bad.It also worked like a dream loading and is very easy to handle.I don't know how it will
hold up but it is built very well. I would recomend this gun to anybody.

Nice but...
Although I get the occassional nail jam (and the gun is easy to clear), I find, especially in cold weather, the gun just loves to shoot two or three nails at a time. Which is a pain. But it has shot them consistently and well for a lot of jobs and seems in no desperate way to wish to continue doing so for a long time to come. I think coil nails are a pain, but this gun loads them easily. It also seems to respond very nicely to preesure changes and will handle typical "abuse" well. It feels good and balanced, is fairly light and works and works.

In Three Short Words - "Simply THE Best!"
I have used nearly every roofing nailer made (ie: Hitachi, Porter Cable, Makita, Senco, paslode, Max, etc.) and have yet to find anything to compete with the accuracy, precision and consistancy of the Stanley Bostitch RN45B-1. This gun actually makes roofing pleasurable (if you can believe that)! However, ask any roofer applying his trade in 100+ weather if the frustration of jams, short sinks don't make a hot day even hotter?! The Hitachi is a distant 2nd, cost about 30 bones more on the average, however, is not the workhorse that the Bostitch is, and needing far more repair and maintenance. In other words, when the Bostitch is making you money, the Hitachi is getting a check up and repair; to say nothing of it lagging behind in all performance catagories as well. Actually, I have had a great degree of success with the Porter Cable as well. For whatever reason, folks just like to beat up on Porter Cable (unless it is their 216 Planer or 557 Plate Joiner) and would put it right there with the Hitachi, almost. But make no mistake about it! The Stanley Bostich RN45B-1 is the air coil nailer that steals the show running away! Imagine an automobile having the lines of a Ferrari, the speed of a Lamborgini Diablo, power of the Dodge Viper and the durability of a Mac Truck - and you have the Bostich RN45B-1. Have a better concept now about this roofing nailer? :o) ... Read more

Subjects:  1. Air Tools    2. Nailers    3. Roofing Nailers    4. (Nail Guns)    5. (Nailguns)   

Features

• Multi-blow technology that virtually eliminates overdrives
• DC motor delivers 650 watts of power
• Drives 1 to 1-1/2-inch roofing nails
• Comes with two 20.4 Ni-cad batteries,one-hour charger, two canisters of 1-1/4" nails, manual, video, and case

Reviews (4)

6 Roofs per year
While I am not in the trade year round I have found this tool to be the answer to many of the challenges we face with safety and quality while on the roof.
This gun eliminates tripping hazards as there are no hoses or electric cords.This keeps the comprtessor off the roof so no hazard encountered while tring to get your equipment up tothe work surface.
No overhead issue for the team on the ground because the grip pads on the top end of the gun really do stop it from sliding off the roof unlike other air guns that momentum of the hose carries the gun off the roof onto the teamnbelow.
Noise is much less of an issue than with compressed air.Communications from the ground up and down is easier. No noise to yell over.
I have read that you can reload the plastic containers the nails come in however I have not been able to find a manufactures note that would indicate that this is a safe practice.
Compared to the conventional Bostitch RN45B we are able to lay em down and nail em with equal speed and without fighting the hose all day.
The quality of our finished product is greater because there is no marring of the roof edge shingles from the air line rubbing against it.That is the customers line of sight and that matters.

...

If you are buying an air nail roofing gun. Reconsider and buy this battery operated gun.

Log Home Contractor
This is a fabulous tool.I use as many cordless tools as I can because I hate listening to my generator and compressor running all the time.Bostitch has made a top of the line tool with this one.The battery will lay about 2 1/2 square of shingles without a recharge and with two batteries one can be charging at all times so you never run out of power.The tool is loud but not as loud as a generator, it is a bit on the heavy side but much better than having that air hose in tow and the way it holds in your hand you barely notice the weight.You have to buy the nails in the in the plastic canisters which only cost on average two dollars more per box but if you are a real miser you can buy regular coil roof nails and reload the canisters.If you are like me and want to use cordless as much as possible and you do many roofs this is a great alternative to pneumatic.I have literally waited for years for this tool. . . thank you Stanley Bostitch.

No Hoses, No Jams, No Cords, No Overdrives, No Compressor
My construction class recently bought two of these nailers because our compressed air supply is too high pressure for nailers, so we use cordless or a seperate compressor.I have used a pneumatic nailer on five roofs ranging from small ticket booths to full sized play barns with flashing, felt paper, drip edge, and more.I was skeptical about a cordless nailer that did not use gas cells like a Paslode Impulse system, but I realized that it takes a lot less force to drive a nail through some shingles or a thin strip of aluminum than a 2x12 header.The jackhammer-style system takes some getting used to but it does not require padded gloves like a demo hammer.As for the nail cartridges, they are great.Our pneumatics constantly jammed from misshapened and bent wire-collated nails.The cartridges keep the nails in the correct shape....This is the only roofing nailer you will ever need, just get some cartridges of nails, a couple of batteries, go up on your roof and start laying whatever is needed.This is a great innovation.If you dont believe me, try Tools of The Trade, they gave it a special award for innovation ... Read more

Subjects:  1. Air Tools    2. Nailers    3. Roofing Nailers    4. (Nail Guns)    5. (Nailguns)   

Features

• Box of 5,000
• 1/2-inch staples
• Fits PC1000 Grand Slammer staple hammer

Subjects:  1. Cordless Tools    2. Staples    3. (Stapels)    4. Fasteners    5. Construction Staples   

Editorial Review

A popular model among builders who work on high-repetition projects like trusses and prefabricated frames, Bostitch's utility coil nailer offers huge capacity and solid reliability. When fully loaded, this nailer certainly isn't the lightest tool you could choose, but when you can drive 300 nails without having to reload, you quickly appreciate the timesaving capacity. With its aluminum housing and composite canister, this gun is a tough piece of equipment, designed to hold up to bumps and falls--the inevitable beating nailers take on a job site. The nailer's aggressive teeth easily grip lumber for toe-nailing. An adjustable deflector conveniently directs exhaust away from the user, and a quick-release canister makes loading new coils a snap. We were impressed with how solid the whole unit feels--it has the burliness of an industrial-strength machine. This model shoots 1-1/2- to 3-1/4-inch, 15-degree, wire-weld-collated, full-head nails, and weighs just over 8 pounds empty. Note: this model does not haveadjustable drive depth. --Jonathon Tudor ... Read more

Features

• Comfortable grip
• Contact-trip trigger
• Large-capacity magazine
• Lightweight--only 8 pounds
• Made in the USA

Reviews (11)

Coil nails
The description of this nailer states that it takes nails from 1 1/2 to 3 1/4. I have been unable to find anyone that sells less than a 2" nail for this gun. I also e-mailed the company to see if they could help me but received no response back. If you need a gun that provides a wide range of uses then you may be dissatisfied with this nail gun.

Bostich N-80
I am a framer by trade and have 5 N-80's, they are a very dependable tool.The large nail capacity and full round headed nails are its biggest assets. Some of the drawbacks with the coil gun compared to the stick is that sometimes the coil of nails gets bound up in the magazine and needs to be straightend out.When toenailing it doesn't sink the heads as well as the stick.

Darn Good Gun
I am a framer in New York where we frame in weather ranging from 90+ all the way down to below freezing. I have found this gun quite reliable and have had only minor problems usually associated with rubber o-rings that may freeze in extreme temperatures. The extra weight of the nailer is more than offset by the nail magazine capacity. My crews use all seven of my guns regularly and we still have yet to retire even the first one I ever bought. Last, but not least, these guns are extremely well-priced and an excellent bang for the buck. I recommend it highly. ... Read more

Subjects:  1. Air Tools    2. Nailers    3. Framing Nailers    4. (Nail Guns)    5. (Nailguns)   

Features

• Dial-A-Depth control
• Easy rear loading
• Easy-clear front nose
• No-mar tip
• Lightweight--only 4.6 pounds

Reviews (9)

Kit Gun
I am just a hobbiest and do not use my gun every day. If you like having to buy o-ring kits, bumper kits, and triggers, go ahead and get one. It seems like every time I go to use it I have to buy a kit or trigger. I have bought enough kits for my gun to buy 3 guns. It's the worse gun I've ever bought. I had a 18ga. Central Pneumatic brad nailer from Harbor Freight that I used a lot more than the N60FN and I never had to put a kit in it. It lasted 20 years. It finally died just recently and I can't get a kit for it. The problem with bostitch nailers is the kits cost way too much. It's kind of like buying a printer. When the ink runs out just go ahead and buy another printer because the ink is more expensive than the printer. I haven't shot but a total of 4 boxes of nails through mine and have had to use four kits and 2 triggers. I don't know if the new version is better than mine, but I'm afraid to try it.

Good Gun
I purchased the N60 and later read the reviews on this web site.A consistent theme seems to be that it does not have enough power to counter sink nails in hard wood.I have found with mine that if you remove the rubber tip, put the pressure around 90 psi, and crank the depth adjustment down, it countersinks consistently just fine.I tried it out on a 4" block of rock maple and it did great.Oak was just fine too.I can't imagine what this gun wouldn't work on (unless you are nailing plate steel to concrete).

Good gun, but get the 62 for greater power
I bought the 59 and took it back to Home Depot, then I took a chance on the 62 since I needed to get through maple consistently.If you'll never go through hardwoods this is a good gun, but if you need to punch through hardwoods you can't go wrong with the 62. ... Read more

Subjects:  1. (Nail Guns)    2. (Nailguns)    3. Air Tools    4. Finish Nailers    5. Nailers