Features

• 5" long to fit Delta and other standard scroll saws
• Plain end design for smaller entry holes when cutting inside the workpiece
• Spiral design allows cutting in any direction

Subjects:  1. Blades    2. Scroll Saw Blades    3. (Scrollsaws)   

Features

• Universal design fits many brands of jointers
• Fits 6" jointers to provide proper airflow for efficient dust collection
• 4" diameter outlet for use with standard hoses

Reviews (1)

Might Be able to Make it Work
I expected a dust connector from Delta, designed for Delta 6" joiners would "bolt up" to a Delta 6" Joiner.That's not the case. Other than duct tape, I'm not sure how to install this item on the joiner. ... Read more

Subjects:  1. Vacuums    2. Dust Collectors    3. Fittings    4. (Vacumes)    5. (Vaccuums)    6. (Vaccums)    7. (Vacums)   

Features

• Two-year limited warranty on machines, parts, and accessories
• Utility grinder for blade and tool sharpenening
• Two fully adjustable tool rests for a wide range of sharpening angles
• 120 grit wet/dry grinding wheel for fine sharpening
• Rubber pads minimize vibration and maximize stability on many surfaces

Reviews (5)

Not bad for the money.....
I bought this little grinder at a local home center for twenty bucks...close out sale. I have it sitting next to my wood lathe. I use it to touch up my lathe tools while doing projects. I don't use jigs and only use the tool rest to rest my hand on. I touch up the edges using my hands and mark one eyeball. Since the wheel turns so slowly it's pretty hard to mess up an edge after a little practice, even on the gouges. If you take your time and use a little patience at first, you can produce a good edge. Its not meant to reshape or grind out nicks, etc. Its basically an overgrown honing stone. It does a good job. I use it dry and clean the stone every so often. If I have a real bad one I go to the 8" grinder to shape and establish the edge, then use the small one to finish. My neighbor has the Tormak, and its a wonderfull machine, he's got all the jigs, holders, etc. But I can put an edge on my roughing gouge and be making chips before he gets set up to sharpen his. Guess its all in what you want to do....I just want a sharp tool. This little machine delivers what it says it will, but nothing more. It's not a do-all. I would reccommend it to anyone as a honing tool.

Terrible.
I thought it was a great value for a Delta tool.

While unpacking it I heard rattling inside, opened it up and found a bolt and washer for the motor mount had come off. That was easy enough to fix.

I did not much like the way it looked on the inside -did not see effective rubber gaskets to keep water from getting to the motor housing, the two belts for the reduction gears appear to be nylon rather than reinforced rubber. But I figured "it's a Delta, the design should be okay and it was only forty bucks".

Ten minutes into using it one of the belts slipped -had to open it again and noticed a lot of play in the pulleys sliding on their axels. I decided not to muck with it, just put the belt back on the gears and after another five minutes it slipped again.

It's back in its box ready to be returned.

Delta sure went cheap on this one.

Excellent for hollow grinding
The unlisted dimensions are 12 inches wide by 7 1/2 inches deep by 6 inches high.It was slightly larger than I expected.The wheel is very absorbant so water can be added slowly to the wheel itself even while it runs.This is not a common grinder but is a sharpener and requires patience and some skill.It makes an excellent hollow grind as described in another review.It does not cut quickly.The tool posts could be sturdier.The allen wrench fits the screw heads rather sloppily.These two points are why I gave it 4 stars instead of 5.Amazon.com had the best price anywhere with free shipping.It was well worth the money.I am very happy with this tool. ... Read more

Subjects:  1. Grinders    2. Bench Grinders   

Features

• Two-year limited warranty on machines, parts, and accessories
• Adds roll-away portability to Delta 37-195 6-inch Jointer
• Steel construction for durability
• Foot-operated lever provides easy raising and lowering of base
• Inside dimensions 13-1/2 by 18-1/2 inches for a custom fit

Reviews (2)

Must for small shop
Just the best device to move your equipment.
With out them I could not have the machines because there would not be enough room in my basement shop and I do not wish to heat another space.
They are over priced for what they are but to some of us a necessity. Good quality and function.

Delta Mobile base for 37-195 6" Jointer
I would absolutely recommend any mobile base for any tool, if you have a small shop (in your garage etc).I have one on my table saw and it is great.I can push the saw out into the middle of my garage when cutting large pieces and put it in the corner when I am done.They just make your small shop seem bigger because of the versatility. ... Read more

Subjects:  1. Mobile Bases    2. Jointers   

Features

• 3-inch diameter for sanding large, sweeping curves
• Aluminum oxide abrasive for long lasting, efficient sanding
• 120 grit for efficient sanding with finer finish
• 6 pack

Reviews (1)

Perfect Fit
I like using the finer grits to smooth the edges around the pattern marks.And the large diameters are great for gentle curves.

With thin pieces you can flip these over to keep from wasting part of the sleeve.And theyare tall enough to stack several items together if you are making more thanone part.

I used these on a drawer divider project.I stacked up to fourcurved dividers together at one time to get the same shape on each of them. ... Read more

Subjects:  1. Sanders    2. Sleeves    3. Sand Paper    4. (Sandpaper)   

Features

• Fits Delta 14" band saws and others requiring 93-1/2" blades
• 1/4" wide by 93-1/2" long
• Cuts down to 5/8" radius
• Heat-treated teeth for superior performance
• 6 teeth per inch

Subjects:  1. Blades    2. Band Saw Blades    3. (Bandsaws)   

Features

• Fits Delta 36-220 10-inch compound miter saw
• Standard equipment replacement for an exact fit
• Installs easily using built-in spring clamp

Subjects:  1. Saws    2. Miter Saws    3. Miter Saw Attachments    4. (Mitre Saws)    5. (Mitersaws)    6. (Mitresaws)   

Features

• No more unannounced visitors driving up to your home or office
• Indoor receiver chimes when you drive past the sensor in your driveway
• Unlike other driveway motion detection systems, Driveway Monitor does not get false alarms from pedestrians, animals, or shadows
• Easy installation - just mount the sensor next to your driveway on the included stake and plug the receiver into any electrical outlet inside your home

Reviews (4)

does product do what it saids?
excellant item purchased 3months ago works 99% of time very happy with results.

Detection is a problem
I've had my unit for about a year. I'm 80% pleased with the product. I have the detector set on high, but sometimes miss the incoming vehicle. I have tried different locations and angles without much change. The distance is about 600 feet from the receiver. It seems like the dector needs to be set at a higher sensitive level.

Good range, but unreliable detection
I've had this unit for 6 months now, always trying to adjust it and put it in different locations, high and low, far and away to get a reliable signal when someone arrives in the driveway. Range does not seem to be a problem. I have the unit currently about 600 ft. from the receiver in the house. However, detection does seem to be a problem. Even with the jumper setting adjusted to high sensitivity (I think the range is then 11-15ft. away), I have to get within about 2-3 feet of the unit with a vehicle to get it to detect. If it detects, the chime immediately goes off in the house. And I also think the speed of the vehicle travelling by the unit has something to do with it. It's about a 50/50 hit whether or not it actually detects the vehicle. I'm going to try the company themselves (1yr. warranty) to see what the problem is. I WANT it to work. ... Read more

Features

• Secures bowls and bases for turning without using mounting holes
• Adjustable to fit a variety of diameters
• Reversible jaws are stepped to fit a variety of projects
• Cast iron for durability and vibration resistance

Reviews (1)

Really a good chuck but ...
The chuck is really well made and the wrench moves the jaws very smoothly.Unfortunately I have to return it.Not because the chuck has any faults,but rather because the description and the professional reviewer failed to tell me that the jaws are adjusted individually,rather than concentrically with one turning of the wrench.Now that's a good feature if you are working with blanks that need that.But my needs were stricly for round concentric bowl use,and I wanted to be able to ensure the bowl blank was centered with one tightening operation. The picture shows the T-wrench and one adjustment socket.No hint that the chuck has independent adjustments.By the way,the Delta label on the box indicates the independent adjustment.So should Amazon's description.

So,if that's what you need,it is a solid product,just what you'd expect from Delta. That's why I gave it 4 stars.Couldn't give it 5 without actually using it,and since I'm returning it,I couldn't do that. ... Read more

Features

• Fits Delta 31-460 Belt and Disc Sander and others requiring a 6-inch disc
• Adhesive-backed for easy installation
• Aluminum oxide abrasive for long lasting, efficient sanding
• 100 grit for efficient stock removal with a finer finish
• 2 pack

Subjects:  1. Sanders    2. Discs    3. Sand Paper    4. (Sandpaper)   

Features

• 5" long to fit Delta and other standard scroll saws
• Plain end design for smaller entry holes when cutting inside the workpiece
• Precision ground tooth design for smoother, more accurate cuts
• Contains six each of all three sizes of PGT blades

Subjects:  1. Blades    2. Scroll Saw Blades    3. (Scrollsaws)   

Features

• 2 pack
• 80 Grit
• 8" diameter
• Aluminum oxide abrasive
• Fits Delta 31-34- belt and disc sander and others requiring 8" discs

Subjects:  1. Sanders    2. Discs    3. Sand Paper    4. (Sandpaper)   

Features

• Fast, safe, easy to use
• Patented magnetic design holds knives in proper position for easy installation
• Allows faster and more accurate adjustment and replacement of blades

Reviews (1)

This jig is not always the best way to go
My joiner is an old 4 1/8 inch Craftsman. It runs pretty good but the knives are not easy to set. This jig seemed to be just the thing but there are two short comings I found:

1. When the jig is lined up with the knife at top dead center, the screws holding the knife in place are not accessible. So the jig has to be moved forward enough to get the knives to rotate just a bit. By this time, the knives are to high. With this set up, no amount of tweeking got both knives parallel and at the same height.

The way I tested whether the knives were parallel was to join a piece of scrape (3/4 x 3 1/2). This joined edge (3/4) was placed on the cast iron saw table and a square was used to see if the 3 1/2 side was 90 degrees to the table. I never had a test run where this was the case.

Another way I came up with was a ruler. The ruler was placed on the infeed side with the "6" on the very edge, side closest to the fence. Then the cutter was rotated until the steel blade hit the ruler. The contact point on the ruler was noted. In my case, this was about 7 1/16 on the ruler. Then the ruler was moved to the other end of the knive and the process was repeated. Most of the time I could not detect a difference so maybe my machine is the real problem.

2. The magnets were not strong enough to pull up the knives every time. Sure, the jig would stick to the cast iron table but the knives would often stay put. I used a spare rare earth magnet to pull the knives up to the jig magnets. Once in place, the knives would stay put most of the time. I ended up making another little tool with the magnet screwed to a scrap piece of wood. This was used to pull the knives up to the jig magnet.

So, I'll keep the tool as it came by way of UPS and sending it back would not be free. But I would be very careful about recommending the jig. ... Read more

Subjects:  1. Jigs    2. Knife-Setting Jigs   

Features

• Two-year limited warranty on machines, parts, and accessories
• 1/5-hp induction motor for smooth, quiet power
• Slow speed wet wheel allows sharpening hardened cutting tools without damaging temper
• Includes sliding angle jig that sharpens double angle tools.
• Adjustable tool rest to compensate for wheel wear

Reviews (8)

A disappointment from Delta
I loosing faith in delta slowly but it is happening. this grinder looked and sounded OK for my purposes. But the slow wheel wobbles side to side so much it is not worth the aggravation. I tried Truing it, Shimming it and reversing the wheel. All to no effail. upon Reversing the wheel I noticed that the wheel shaft is machined to small creating the wobble. there is nothing that can be done. I am disappointed in delta For this design

Works exactly as advertised.
When this unit is used properly, dry wheel for grinding and wet wheel for honing, this tool does a more than adequate job.When honing, using the entire wheel by sliding the blade across the surface using using moderate to moderately strong, even pressure eliminates the need for frequent dressing.Cleaning could be easier and the guide could stand some improvement, but overall this is a very good tool, especially considering the price.I got what I paid for.

I expected much better from Delta
I havd owned this grinder for about six months and I am ready to throw it in the trash. To start with, the wheel is too soft and requires frequent trueing.This is particually a problem when you have to stop and true while working on a blade because it changes the grinding angle. The rpm's are too slow. With soft wheel and the low rmp's it can take over a hour to grind a blade. Cleaning up is also a problem. You have to take the wheel well off to clean out the residue of the wheel, which is considerable because the wheel is so soft.

I can turly say I can find nothing redeeming about this tool! ... Read more

Subjects:  1. Grinders    2. Bench Grinders   

Features

• Fits Delta 12-inch and 16-inch band saws and others requiring a 82-inch blade
• 3/8-inch wide, cuts down to 1-3/8-inch radius
• 6 teeth per inch for fast cutting
• High carbon steel for long-lasting sharpness
• Tension-tested for strength and quality assurance

Subjects:  1. Blades    2. Band Saw Blades    3. (Bandsaws)   

Features

• Spans area between fence rails to support workpieces
• Laminated surface for durability and easy movement of material
• Fits saws with Delta 52-inch Unifence for a complete installation
• Shelf: 3/4 by 15 by 40 inches

Reviews (1)

DELTA 34-998
THIS ITEM COMES WITH NO HARDWARE.
IT SHOULD AT LEAST COME WITH MOUNTING HDW FOR THE SHELF.
... Read more

Subjects:  1. Fences    2. Table Saw Fences    3. (Tablesaws)   

Features

• 2-inch diameter for sanding larger curves and contours
• Aluminum oxide abrasive for long lasting, efficient sanding
• 150 grit for efficient sanding with finer finish
• 6 pack

Subjects:  1. Sanders    2. Sleeves    3. Sand Paper    4. (Sandpaper)   

Features

• Built-in width of cut scale for quick set up
• Cuts dadoes and grooves from 1/8" to 13/16"
• Carbide-tipped for long lasting sharpness and durability
• 7" diameter/ 5/8" arbor hole to fit most 10" table saws
• Adjustable for exact sizing of dadoes

Reviews (2)

Saw Arbor Length
I purchased this blade with the purpose of using it on a Delta 10 inch table saw.What I found was that the arbor on my saw was not long enough to accomodate this type of dado blade.Delta should state either the minimum arbor length or model numbers that this blade will work on.In my case I had to go with a 6" stack dado with the maximum cutting width of 1/2".

quick and reliable adjusting dado.
With the delta adjustable dado, changes for cuts are quick, easy and reliable. No "settling for" the measure with the stacked dado. Adjustments are accurate for the cut "needed". Numbered settings, ie, 1/8" to 13/16" are accurate and quickly made. One negative usually associated with adjustable blades , the bevell cut as compared to the squared cut of the stack dado, doesn't exist with the Delta Adjustable. Quality, especially for the price, is outstanding. Carbon tips hold sharp edge through many cuts of hardwoods. I am very satisfied with the Delta Adjustable Dado. ... Read more

Subjects:  1. Blades    2. Table Saw Blades    3. Dado    4. (Tablesaws)   

Features

• High-speed steel for a sharp edge
• Fits Delta 22-675, 22-676, 22-680, and 22-681 15-inch Planers
• Three pack

Subjects:  1. Planers    2. Knives    3. Knife    4. Blades    5. (Planners)    6. (Plainers)    7. (Surface Planers)   

Features

• Two-year limited warranty on machines, parts, and accessories
• Adds roll-away portability to Delta 12-inch Band Saws and 50-330 Universal Base
• Steel construction for durability
• Foot-operated lever provides easy raising and lowering of base
• Inside dimensions 22-1/2 by 32 inches for a custom fit

Subjects:  1. Mobile Bases    2. Sanders    3. Shapers    4. Universal Bases