Features

• Self-centering jig
• Fold-over tabs for thicker doors
• Mounting holes secure the jig
• 2-1/8" hole saw
• 1" hole saw

Reviews (1)

Good valuable tool for door lock installations
This little gadget works very well in helping to install locks in standard-sized doors.Simply screw the guide onto the door edge and drill the two holes for the locks with the included hole saws.However, the hole saws supplied are not that great.They will dull pretty quickly.Anyway, for the inexpensive cost this set is a pretty good value. ... Read more

Subjects:  1. Jigs    2. Lock-Boring Jigs   

Features

• Full lifetime warranty
• Single-spur design
• Coarse screw point
• Full length heat treatment
• Solid center design

Reviews (1)

well worth the price
I have had several sets of auger bits that only lasted a few uses before becoming so dull they wouldn't drill at all. These bits are great. A little more expensive, but worth it if you use them a lot. ... Read more

Subjects:  1. Drill Bits    2. Drill Bit Sets    3. (Drils)    4. Ship Auger Bits   

Features

• Standared 1" length
• High quality S2 steel
• 20 bits included
• Bit container

Subjects:  1. Drill Bits    2. Drill Bit Sets    3. (Drils)    4. Screwdriver Bits    5. Insert Tips    6. (Screw Drivers)   

Features

• Standard 1" length
• High quality S2 steel
• Pro-Pak bit container made from shatter-resistant materials; one-hand ergonomic design
• 20 bits included

Subjects:  1. Drill Bits    2. Drill Bit Sets    3. (Drils)    4. Screwdriver Bits    5. Insert Tips    6. (Screw Drivers)   

Features

• Full lifetime warranty
• Jet point tip
• High speed steel
• Self-centering tip
• Three flatted shank on 3/16-inch and above

Subjects:  1. Drill Bits    2. Drill Bit Sets    3. (Drils)    4. Brad-Point Bits   

Features

• Black Oxide Coating
• High Speed Steel
• 15 Piece Set
• Case with rubberized grip and sliding latch

Subjects:  1. Drill Bits    2. Drill Bit Sets    3. (Drils)   

Features

• Includes 1/4, 5/16, 3/8, 7/16, 1/2, 9/16, 5/8, 11/16, 3/4, 13/16, 7/8, 15/16, and 1" and rack
• Patented micro-groove point and cutting edge with extended spurs
• For all 1/4" and larger electric drills
• Bores two times faster, lasts three times longer
• 13 Popular Sizes

Reviews (2)

These are a great value for the money
I picked these up at a local hardware store and have been generally pleased with the purchase.They are pretty decent quality for a surprisingly low price.The cutting action is fairly clean with the usual tearout expected from this type of bit.Of course they are just spade bits, best suited to rough carpentry and home improvement tasks - but many times even us woodworkers don't want or need to use a forstner bit!I haven't had need to use every bit in this kit yet, but I was impressed with the array Irwin includes here.For the price I paid, I probably won't bother resharpening when the time comes.

By the way, shop around!I paid less than half the price shown here for the exact same set.

Great product at a great price
Nice job Irwin. These bores are fantastic. I've used them with my Milwaukee cordless and they do a great job. I've used them when cutting holes for electrical cords in furniture that did not have them, and for desks that I needed to run keyboard and mice cables through the top. They cut a perfect diameter hole in whatever you need them to. So far, they have not needed resharpening, and I've used the 1 inch piece at least 20 times. Very well made. ... Read more

Subjects:  1. Drill Bits    2. Drill Bit Sets    3. (Drils)    4. Boring Bits   

Features

• 18" long, 9/16" diameter, .370" shank
• Hole in flute (head) makes it easy to pull wires through hole in wall
• Boring action is faster, smoother, cleaner in most every material encountered in wiring installations
• Longer flute section for deeper boring
• Special flute finishing process assures quick chip removal, no clogging, no binding

Reviews (1)

An old standard that keeps on working.An essential !!
I've been using these for years in the satellite tv, alarm, and the electrical industry.The 18" length is just ideal for drilling from outer walls into the interior, through top and bottom wall plate studs into walls.These are fast drilling and long lasting.I have them in 1/4, 5/16, 3/8 and 1/2" diameters.The 5/8's will be ideal for standard sheathed cable.

Just ordered two more. ... Read more

Subjects:  1. Drill Bits    2. Boring Bits    3. (Drils)   

Features

• 12 hole sizes
• Easy-to-sharpen, non-skid tip
• Single-fluted cutting edge
• 3 flatted shank
• Full lifetime warranty

Reviews (1)

Great for it's designed purpose..
The unibit is fantastic for putting holes in thinner material. A plus is the hole will be deburred on the side you are drilling from. When drilling stainless steel (my experience was with 1/8" 316 ss) be careful toreduce RPM as each step goes through. It can work harden the materialeasily, and ruin the bit. A definate "MUST HAVE" for working withelectrical enclosures and panels as well as sheet metal. Just don't throwaway your normal twist drills. ... Read more

Subjects:  1. Drill Bits    2. Drill Bit Sets    3. (Drils)    4. Brad-Point Bits   

Features

• Jet point tip keeps your drill bit sharper longer
• Self-Centering tip which gives you a clean fast start
• Three flatted shank which gives your chuck a better grip

Subjects:  1. Drill Bits    2. Drill Bit Sets    3. (Drils)   

Features

• Full lifetime warranty
• Jet point tip
• High speed steel
• Self-centering tip
• Three flatted shank on 3/16-inch and above

Subjects:  1. Drill Bits    2. Drill Bit Sets    3. (Drils)    4. Brad-Point Bits   

Features

• Self-centering jig
• Fold-over tabs for thicker doors
• Mounting holes secure the jig
• 2-1/8" hole saw
• 1" hole saw

Subjects:  1. Jigs    2. Lock-Boring Jigs   

Features

• Kurt Busch signature series
• Impact resistant case
• Used in both hand tools or power tools
• 30 piece set

Subjects:  1. Drill Bits    2. Drill Bit Sets    3. (Drils)   

Features

• Split point tips prevents walking
• High-speed steel for faster, smoother drilling and driving
• Drills through wood, metal, and plastic
• 20-piece set for a wide range of drilling/driving operations
• Storage case with rubberized grip and sliding latch

Subjects:  1. Drill Bits    2. Drill Bit Sets    3. (Drils)    4. Screwdriver Bits    5. Screwdriving Sets    6. (Screw Drivers)   

Features

• 6 hole sizes
• Easy-to-sharpen, non-skid tip
• Single-fluted cutting edge
• 3 flatted shank
• Full lifetime warranty

Subjects:  1. Drill Bits    2. Drill Bit Sets    3. (Drils)    4. Brad-Point Bits   

Features

• 18" long, 1/2" diameter, .370" shank
• Hole in flute (head) makes it easy to pull wires through hole in wall
• Boring action is faster, smoother, cleaner in most every material encountered in wiring installations
• Longer flute section for deeper boring
• Special flute finishing process assures quick chip removal, no clogging, no binding

Subjects:  1. Drill Bits    2. Boring Bits    3. (Drils)   

Features

• Black oxide coating for added corrosion resistance
• High speed steel for smooth, fast drilling
• 18-piece set to cover a wide range of applications
• Case with rubberized grip and sliding latch
• Sliding latch design provides added security

Subjects:  1. Drill Bits    2. Drill Bit Sets    3. (Drils)   

Features

• 7-1/2" overall length with a 4-1/2" twist, 1" diameter cutter and 5/16¿ hex shank, comes in a plastic pouch
• Heat-treated full length for added strength
• Coarse screw point for fast boring in all types of wood
• 7-1/2" overall length can bore through up to three studs

Subjects:  1. Drill Bits    2. Boring Bits    3. (Drils)   

Features

• 17" overall length with a 12" twist, 1" diameter cutter and 5/16" hex shank
• For use in drilling applications where small nails and other foreign materials may be encountered
• Single twist type with single cutter and side lip
• Hollow center twist design for fast, continuous flow of chips
• Medium-fast screw pitch, heat-treated full length, guaranteed consistent Rockwell hardness

Subjects:  1. Drill Bits    2. Ship Auger Bits    3. (Drils)   

Features

• 17" overall length with a 12" twist, 1/2" diameter cutter and 5/16" hex shank
• For use in drilling applications where small nails and other foreign materials may be encountered
• Single twist type with single cutter and side lip
• Hollow center twist design for fast, continuous flow of chips
• Medium-fast screw pitch, heat-treated full length, guaranteed consistent Rockwell hardness

Subjects:  1. Drill Bits    2. Ship Auger Bits    3. (Drils)