Features

• Laser cut blade bodies and expansion slots
• Kickback reducing design
• Tri-metal brazing
• Covered by Freud's limited lifetime warranty

Subjects:  1. Freud    2. (Frued)    3. Blades    4. Miter Saw Blades    5. 10-inch Blades    6. (Mitre Saws)    7. (Mitersaws)    8. (Mitresaws)    9. Table Saw Blades    10. (Tablesaws)   

Features

• Wood case
• Five piece cabinet door set
• 1/2-inch shank
• Use withtable mounted router
• Includes 99-512 panel bit

Reviews (1)

Great bits!
I purchased this set and they cut perfectly. Every router bit I own is made by freud. There bits cut very smoothly and they are well built. This set includes 5 bits, a matched set of rail and style bits, a glue joint bit, a raised panel bit (99-512 instead of the one that reguraly comes with the set)Bits cut so smooth that you hardly have to sand. have used other name brand bits and the freud outperform the others 10 to 1. Great bits and very well made. ... Read more

Subjects:  1. Freud    2. (Frued)    3. Routers    4. Router Bits   

Features

• Impervious to chemical attack
• 1/2-inch diameter, 8-degree angle, 1/4-inch shank
• Ground carbide with titanium for long life
• Anti-kickback design
• Computer balanced for vibration free operation speeds over 22,000 rpm

Reviews (2)

This is a great bit
I used this bit in a 2.25hp router (and Porter-Cable guide bushing) to make some dovetails with a jig.Cuts in quartersawn white oak were super smooth, with hardly any tear-out.I also used this bit in a router table setup, again with a 2.25hp router, and the cuts were just as impressive.

Overall this is a very high quality bit at a very good price.I highly recommend it!

Freud dovetail bit, 1/2" shank
What can I say?? Fantastic bit, extremely sharp, cut through redquartersawn oak with no chip out at the ends - One of the nicest bits I'veused. ... Read more

Subjects:  1. Freud    2. (Frued)    3. Routers    4. .25-inch Shank Bits    5. (1/4)   

Features

• Kickback reducing design
• Individually computer balanced
• Precision ground for the smoothest cuts
• Covered by Freud's limited lifetime warranty

Subjects:  1. Freud    2. (Frued)    3. Routers    4. .50-inch Shank Bits    5. (1/2)   

Features

• Wooden storage box
• 1/4-inch shank
• A 3/8-inch bearing is also included to convert all three bits to beading bits
• Cut all composition materials, plywood, hardwood and softwood
• Can be used on hand-held and table-mounted routers

Subjects:  1. Freud    2. (Frued)    3. Routers    4. Router Bits   

Features

• Kickback reducing design
• Individually computer balanced
• Precision ground for the smoothest cuts
• Covered by Freud's limited lifetime warranty

Subjects:  1. Freud    2. (Frued)    3. Routers    4. .50-inch Shank Bits    5. (1/2)   

Features

• Impervious to chemical attack
• 1-1/2-inch diameter, 1/2-inch radius, 1/4-inch shank
• Ground carbide with titanium for long life
• Anti-kickback
• Vibration free operation for speed over 22,000 RPM

Reviews (1)

Great quality
I'm slowly going through and replacing many of my cutting tools with Freud products.Every Freud saw blade and router bit has held its edge better than other maker's products.Freud tools cost more, but since I get to leave them on the saw longer, it's worth it to me.I wish they made drill bits! ... Read more

Subjects:  1. Freud    2. (Frued)    3. Routers    4. .25-inch Shank Bits    5. (1/4)   

Features

• Covered by Freud's limited lifetime warranty
• 3/8" wood chisel
• Chrome vanadium steel
• Hardwood handles with steel hoops
• Overall length approximately 10"

Subjects:  1. Freud    2. (Frued)    3. Hand Tools    4. Wood Chisels    5. (Chisells)   

Features

• Impervious to chemical attack
• 2-1/2-inch diameter, 1-inch radius, 1/2-inch shank
• Ground carbide with titanium for long life
• Anti-kickback
• Computer balanced for vibration free operation speeds over 22,000 RPM

Reviews (1)

Great quality
I'm slowly going through and replacing many of my cutting tools with Freud products.Every Freud saw blade and router bit has held its edge better than other maker's products.Freud tools cost more, but since I get to leave them on the saw longer, it's worth it to me.I wish they made drill bits! ... Read more

Subjects:  1. Freud    2. (Frued)    3. Routers    4. .50-inch Shank Bits    5. (1/2)   

Features

• 10 inch 24tip, 5/8 inch arbor
• Excellent for framing
• Expansion slots cut vibration
• Anti-kickback
• Thin kerf, flat tooth, long life

Reviews (1)

Freud's TK206,10', 24 tooth saw blade
An excellent saw blade, especially for benchtop or contractor saws. Its thinner cutting profile reduces the work required by the saw without affecting the quality of the cut. The wood will need to be cleaned up onthe cut edge,(jointer), but this is a small price to pay when ripping thickhardwoods. It is also one of the lower priced saw blades and Freud onlyputs out quality stuff.Freud's teflon coated 24 tooth blade, (TK206R, Ithink, can't find an I.D. on my blade or package), is an even betterchoice, no pitch to clean. The red teflon really works. ... Read more

Subjects:  1. Freud    2. (Frued)    3. Blades    4. Miter Saw Blades    5. 10-inch Blades    6. (Mitre Saws)    7. (Mitersaws)    8. (Mitresaws)    9. Table Saw Blades    10. (Tablesaws)   

Features

• Kickback reducing design
• Individually computer balanced
• Precision ground for the smoothest cuts
• Covered by Freud's limited lifetime warranty

Subjects:  1. Freud    2. (Frued)    3. Routers    4. .50-inch Shank Bits    5. (1/2)   

Features

• Precision machined for best results
• Premium high speed steel
• Covered by Freud's limited lifetime warranty

Subjects:  1. Jointers    2. Knives    3. (Knife)    4. Blades    5. Planers    6. Knife    7. (Planners)    8. (Plainers)    9. (Surface Planers)   

Features

• Perma-SHIELD coating reduces friction
• 8-inch, 40 TPI combination, 5/8-inch arbor
• Perfect balance between ripping & crosscutting
• Large gullets & flat top teeth for ripping
• High tooth count & ATB ground teeth needed for crosscutting

Reviews (18)

Excellent combo blade!
I've been using the chrome version of this blade on my old (ancient) Jet contractor's saw for about 3 years and couldn't be happier.It leaves a super-smooth, glue-ready surface when ripping soft- or hardwood stock, and equally fine surfaces on crosscuts.My saw is tuned properly, I use a link belt to reduce vibration, and for ripping always use a featherboard just in front of the blade to maintain proper position of the stock.

I showed this blade off at a recent woodworker's gathering of about 30 people, and they were definitely impressed.Can't imagine that it'd be possible to get a much better surface than the LU84 provides.On my humble 1.5HP saw, though, I don't use it for ripping really thick stock.Firmly believe a good 24-tooth ripping blade is the way to go there.

LU84R011 blade
I purchased this blade a few weeks ago and put it on my new Hitachi C10FL table saw. I've always had good experience with Freud products and this blade isn't much of an exception. It is a hefty piece of steel and overall well made. The carbide teeth are THICK which will allow many resharpenings. It is a GOOD blade, but NOT "excellent". For general purpose use that will give acceptable results it certainly lives up to its manufacturer ratings for various types of cuts in different material. A few important points to note, however. There is splintering on the end of a cross cut, I suspect this is mostly due to the flat top grind raker tooth as my "low budget" Lowes bought Freud combo blade with all ATB teeth leaves a cleaner cross cut. The Teflon coating seems to be more of a hindrance than a blessing. It is not perfectly flat in all places, and seems to clog the anti vibration slots in the blade body. Also, the coating has worn off where the arbor washers contact it - I carefully sanded the coating away in this area. The blade does not vibrate at all, and I feel stiffeners aren't necessary though they can't hurt I'm sure. Although I am not sorry I bought this blade, I will be purchasing either a Forrest blade or two separate blades - rip and crosscut in order to get the perfect result for each type of cut. My recommendation would be to go with the LU84M011 blade instead - doesn't have the unhelpful Teflon coating and is ten dollars cheaper.

Really impressed
Just received this blade and mounted it in my Ryobi BT3100.
Using it to cut 3/4 solid oak, 3/4 oak veneer plywood, pine, both cross cut and ripping, it's hard to imagine anything better. Quiet, splinter free. Now I want a couple more for my chop saw and a spare. Everything I've purchased from Freud has been a worthwhile investment. And NO this has not been a paid commercial :-). ... Read more

Subjects:  1. Freud    2. (Frued)    3. Blades    4. Miter Saw Blades    5. (Mitre Saws)    6. (Mitersaws)    7. (Mitresaws)    8. Table Saw Blades    9. (Tablesaws)   

Editorial Review

Are expensive router bits worth the cost? Because of the features found in these Freud bits--long-lasting micrograin carbide/titanium tips, tri-metal brazing, and an antikickback design-- our answer is a resounding yes. Each Freud bit is computer-balanced to run vibration- and chatter-free at speeds well in excess of the typical 22,000 rpm of most routers. These bits have a high shear angle that produces less tear-out and chatter marks, leaving a cross-grained cut that requires little or no sanding. Multiaxis grinding helps ensure the proper relief angle on cutting edges regardless of how the bit is oriented. This nine-piece set includes a nice variety of bits and is ideal for the beginning woodworker. --Tim Block ... Read more

Features

• Can be used on handheld and table-mounted portable routers
• Nine-piece starter set with wood case
• 1/4-inch shank
• Solid carbide tipped for long lasting sharpness
• Bits will cut all composition materials, plywood, hardwood, and softwood

Reviews (2)

Espectacular!!!
Realmente la calidad de estas "Router Bits" es excepcional. El balanceo es perfecto y el filo es inmejorable. Recomiendo esta marca pues la relación precio/prestaciones es muy buena.

No complaints
This is exactly as advertised - the ideal starter set.I bought this set along with my Porter-Cable "Ultimate Router Workshop."The bits are very sharp, sail through wood, and leave a smooth finish. ... Read more

Subjects:  1. Freud    2. (Frued)    3. Routers    4. Router Bits   

Features

• Covered by Freud's limited lifetime warranty
• 6" brass back gents saw
• 15 teeth per inch for the smoothest, most intricate cuts
• Made in England of the finest Sheffield steel
• "TaperGround" to reduce blade binding

Reviews (1)

Nice saw
This is a great saw for for small cutting jobs.I feel that I have more control and get more presice cuts with this saw than with the typical larger size dovetail saw.It has a good balance to it.I find the quality to be excellent and the hole in the blade is great for hanging it up. ... Read more

Subjects:  1. Freud    2. (Frued)    3. Hand Tools    4. Hand Saws    5. (Handsaws)   

Features

• Kickback reducing design
• Individually computer balanced
• Precision ground for the smoothest cuts
• Covered by Freud's limited lifetime warranty

Subjects:  1. Freud    2. (Frued)    3. Routers    4. .50-inch Shank Bits    5. (1/2)   

Features

• Kickback reducing design
• Individually computer balanced
• Precision ground for the smoothest cuts
• Covered by Freud's limited lifetime warranty

Subjects:  1. Freud    2. (Frued)    3. Routers    4. .50-inch Shank Bits    5. (1/2)   

Features

• Laser cut blade bodies and expansion slots
• Kickback reducing design
• Perma-SHIELD coating
• Covered by Freud's limited lifetime warranty

Reviews (2)

Teflon Coating is a nice feature.
This is the first Teflon Coated blade I purchsed, and not the last. It offers a great cut in my Delta Contractor saw. It compares to blades costing twice as much. Highly recomended if you're using a smaller HP saw. O-clearance inserts help too.

Performs well on low powered saws
I reccomend this product to a hobbiest with a 1 HP saw. It gave me very clean cross cuts. It requires much less feed pressure than any other blades I've used. If you want quality cuts from a low powered saw, this is theblade for you. ... Read more

Subjects:  1. Freud    2. (Frued)    3. Blades    4. Circular Saw Blades   

Features

• Kickback reducing design
• Individually computer balanced
• Precision ground for the smoothest cuts
• Covered by Freud's limited lifetime warranty

Subjects:  1. Freud    2. (Frued)    3. Routers    4. .25-inch Shank Bits    5. (1/4)   

Features

• Use with shaper cutters for template work
• Allows you to make arched cathedral doors

Subjects:  1. Freud    2. (Frued)    3. Shapers    4. Shaper Attachments