Features

• Fits NV50AP2
• 1 1/4" x.083 RG
• Metal Cap
• 2.8m Count
• Electro Galv

Subjects:  1. Hardware    2. Fasteners    3. Nails    4. Collated Nails    5. Siding Nails    6. (Colated)   

Features

• Fits Hitachi NV50AP2 nailer
• 2" x.083 RG
• Metal Cap
• 2.8m Count
• Electro galvanized

Subjects:  1. Hardware    2. Fasteners    3. Nails    4. Collated Nails    5. Siding Nails    6. (Colated)   

Features

• BIM
• Wood/Nail blade
• 6 TPI
• 5 pack

Subjects:  1. (Recipracating)    2. (Sawsalls)    3. (Sawzalls)    4. Blades    5. Reciprocating Saw Blades    6. Wood-Cutting Blades    7. Multipurpose Cutting Blades   

Features

• 1 3/4"
• 7/16" crown
• 10m Count
• 16 Guage
• Fits N5008AC

Subjects:  1. Fasteners    2. Staples    3. Construction Staples    4. (Stapels)   

Features

• Hitachi exclusive 5 year warranty
• Powerful 15 amp, 2.8 hp motor
• Table tilts at 45 degree
• 900 RPM with 11 13/16" height cut
• Rack and pinion fence adjustment

Reviews (12)

Over priced under powered
I obtained this saw from one of my Doctors hobby shop.I got it for $610.00.At this pice it is worth the money.I am a one man shop building custom furniture.It is great for matching pannels. It is underpowered for production.I was a tool and die maker with General Motors in the 60's.I took the saw apart and rebuilt it.There is no vibration and it cuts streight as an arrow.If you find a used one and need a dedicated resaw this one is great for the small shop. It shoud come with a 3hp motor and the price shoud be under $2,000 with all the guide attachments.The quality is top notch, no complaints in that department.I use a 3" carbide skip tooth blade on the saw.I never take it off.Happy Sawing.

The resaw seems uderpowered at time, but overall a fine saw
I have owned the resaw for six months now. I have used the saw to resaw maple and birch. The saw cuts the 8" plus wood nicely. I knew the motor was underpowered when I bought the saw. My shop is a one man shop, with not many time restraints, so not to big a problem for me. The motor never stalls and the resaw runs smoothly

Well Built But Underpowered
I have had my Hitachi bandsaw for about 4 years and have used it extensively to make bookmatched panels in addition to ripping boards in the rough.When properly set up and adjusted, it has performed well but I have found it to be frustratingly slow in its cut rate when resawing 8" to 10" wide walnut or hard maple boards. It does provide adequate tension for the 3 inch blade, being approximately 16000 psi when the adjustment is against the stop (blade manufacturers recommend a minimum of 15000 psi).Note, many bandsaws cannot attain proper tension with a resaw blade of even 1.0 inch width.

The pluses of the saw is that it is well made and easy to setup and adjust (provided that you know what you're doing).The minuses are its price and the fact that it is underpowered (the motor should be a 240 volt unit of at least 3 hp). ... Read more

Subjects:  1. Saws    2. Band Saws    3. (Bandsaws)   

Features

• Hitachi exclusive 5 year warranty
• Powerful 2.5 HP motor
• Heavy-duty quick locking vise
• 80 tooth carbide blade included
• Tool-less angle adjustment

Subjects:  1. Saws    2. Cut-off Saws    3. (Cutoff)   

Features

• External brushes
• 7 1/4" cordless circular saw
• Safety ilumminates guide light
• Recip saw has tool-less blade change
• 2.0 amp/hour batteries

Reviews (1)

Ultimate cordless
I have the Dewalt 24 Volt saw and sawsall,they worked good for the first six months, after that I could not depend on them to go on jobs with me without wired tools as back up. I have had the Hitachi combo for few months and they are much better tools than the dewalt 24 volts. The saw has the biggest blade on the market( 7 1/4 "), it weighs less than my Porter cable electric saw, and it is very comfortable to use. It has a luminated cutting area also, it comes in handy when you are working indoors.
The sawsall is very compact and powerful, you can control the speed thru the trigger. The price of these tools are cheaper than the Dewalts and they are superior tools.
P.S. The Hitachi Green is a nice break from the yellow, red, and grey colored tools out there. ... Read more

Subjects:  1. Cordless Tools    2. Combo Packs    3. (Volt)    4. (V)   

Features

• 1" wide crown stapler
• Heavy Duty Construction
• Ergonmic Handle
• 2" capacity
• No jam nose

Subjects:  1. Air Tools    2. Staplers    3. Construction Staplers    4. (Staple Guns)   

Editorial Review

It was love at first sight when we opened the case--and once we had this drill in our hands, we've practically forsaken all others. It's one of the smallest we've seen, but don't be fooled by that--it's a tiger. It feels well-balanced in hand, even with the battery installed. You can't say that about many cordless drills. Of course, it has the 22-position clutch offered by most drills in its class today, and its compact size will get you in where other drills can't go. This tireless worker is accompanied by a handy set of bits and a great flashlight, powered by its own 14.4-volt battery. The multiposition head shines a super beam at the touch of a button. A rugged carry case houses the whole shebang, making this kit, dollar for dollar, a great deal. You'll love this drill. --Kris Jensen-Van Heste ... Read more

Features

• Key-less chuck and 22 stage clutch
• 7-piece kit includes drill, 2 batteries, charger, flashlight, bit set, and case
• Variable speed
• Electronic speed control to maintain RPM at all torque levels
• Maximum torque of 213 in/lbs

Reviews (10)

Very pleased with this kit
I was so glad I had this drill during the hurricane season in Fall 2004.The first big test beyond small in house projects.We installed and uninstalled steel hurricane shutters twice and thank God we did, the hurricanes came right through my city.Light weight and well balanced in your hand, never needed recharging during the job (over two hours) and torque control.I had to use the flashlight when we lost power and I had two charged battery packs.Very useful in an emergency.

Holding up to heavy use...
When I first saw this set I was impressed with how much there was for the price and the apparent high quality. But I decided to wait a while before writing the review to see how it performed in service. I recently completed most of the work on a 650-sq-ft addition to the house. The Hitachi started by drilling holes in the pad and setting concrete anchor screws through the sill plate and finished by driving hundreds of drywall screws. I even dropped it once onto concrete with no apparent damage. I now have very high confidence that this will be a long-lived tool as well as a good-looking and pleasant to use one. Highly recommended. (The work light is nice too.)

awesome little powerful drill
I am intermediate finish carpenter.I read an article in Popular Woodworking magazing on 14.4 cordless drills.They hit the nail in the head.The performance is awesome. For the money you get what you pay for and more.I recommend this little drill to anybody.I have it as second drill and I would never get rid off it. ... Read more

Features

• 3 1/4 inch blades
• 2 per package
• High speed tungsten steel
• For model p20sb

Reviews (1)

A must have item!!!
These are high quality steel blades made by the manufacturer just to fit the Hitachi planer. I have about four sets on hand with my planer. I like to have extra's in case they get dull you can quickly change to a new set. Plus, because they are steel they are easily resharpened at tool sharpening shops or if you have the right tools you can do it yourself!!! GREAT PRODUCT!! ... Read more

Subjects:  1. Planers    2. Knives    3. Knife    4. Blades    5. (Planners)    6. (Plainers)    7. (Surface Planers)   

Features

• Blade guide assembly for 1/2 inch, 3/8 inch, 1/4 inch blades

Reviews (1)

No installation instructions...
Although these blade guards weren't terribly difficult to install, it bothers me that they are sold and shipped without any instructions, cautions, diagrams, etc.This seems like a huge liability issue the first time someone gets hurt after installing these incorrectly.I recommend against anyone trying to install these unless you are absolutely sure how the work, and preferably have another saw to look at as a guide. ... Read more

Subjects:  1. Saws    2. Band Saws    3. Band Saw Attachments    4. (Bandsaws)   

Features

• Hitachi exclusive 5 year warranty
• Powerful 9 Amp high performance motor
• New ergonomic form-fit design
• Conveniently located reverse switch
• Trigger lock

Reviews (2)

Torque
If you want a drill with tons of torque, this drill is for you. I'm a big guy (fat) & I can really lean on this drill without stopping, or slowing it down much which is uncommon these days. Look at all the others & I don't think you can find one with more torque without spending alot more.

Very nice drill!
Very solid performance. Haven't had any trouble with mine. Really powerful. ... Read more

Subjects:  1. Drills    2. Pistol Grip Drills    3. (Drils)   

Features

• Easy to install and detach for portability
• Stabilize molding 3-4 feet long for smoother, more accurate cuts
• Designed for the Hitachi Compound Miter Saw Model C10FC

Reviews (2)

ok for cutting moderate lengths of molding.
The good points: 1) easy to install.2) Help stabilizes molding 3-4 feet long.3)Does not compromise the portability of the saw.

The bad points: 1) a little pricey for what you get.2) Marginally helpful when cutting a little off a 7-8 foot length of molding.For this you really need a larger add-on fence system.

In my opinion, this device should really be included with the saw as a standard feature.

Great wings
These table extension wings are exactly what was needed in the workshop that I purchased them for.Now two man jobs have become one.The wings for the Hitachi miter saw were easy to install and just complements the saw.Its a great addition. ... Read more

Subjects:  1. Saws    2. Miter Saws    3. Miter Saw Attachments    4. (Mitre Saws)    5. (Mitersaws)    6. (Mitresaws)    7. Work Support    8. Saw Stands   

Features

• Hitachi exclusive 5 year warranty
• Powerful 6.8 amp motor
• Easy to operate large trigger /stop button and forward/reverse changeover switch
• Easy-to-view change lever that switches between Impact and Rotation mode
• Synchronized two-speed transmission permits smooth shifting between low and high speed ranges

Subjects:  1. Drills    2. Hammerdrills    3. (Drils)    4. (Hammer Drills)   

Features

• Includes Oil Feeder (model 931848), Hex Wrenches (955857 & 943277), Wrenches (971109 & 872422) and Side Handle (956527), cold chisel (985231), scaling chisel (985232), and clay spade (985233)
• Crushes and grooves concrete, cuts asphalt, digs gravel roads
• Powerful 12.2 AMP motor for heavy duty demolition
• Automatic oiling system with unique "air-pressure oil control" enables extended use without oiling
• Auto-stop carbon brushes protect armature and extend tool life

Reviews (1)

"Just the one?"
"How did I get the Stone out of the mirror?"

"Ah, now, I'm glad you asked me that. It was one of my more brilliant
ideas, and between you and me, that's saying something. You see, only
one who wanted to find the Stone -- find it, but not use it -- would be
able to get it, otherwise they'd just see themselves making gold or
drinking Elixir of Life. My brain surprises even me sometimes.... Now,
enough questions. I suggest you make a start on these sweets. Ah! Bettie
Bott's Every Flavor Beans! I was unfortunate enough in my youth to come
across a vomitflavored one, and since then I'm afraid I've rather lost
my liking for them -- but I think I'll be safe with a nice toffee, don't
you?"

He smiled and popped the golden-brown bean into his mouth. Then he
choked and said, "Alas! Ear wax!"

Madam Pomfrey, the nurse, was a nice woman, but very strict.

"Just five minutes," Harry pleaded.

"Absolutely not."

"You let Professor Dumbledore in..."

"Well, of course, that was the headmaster, quite different. You need
rest."

"I am resting, look, lying down and everything. Oh, go on, Madam
Pomfrey..."

"Oh, very well," ... Read more

Subjects:  1. Rotary Hammers & Breakers    2. (Rotery)    3. (Roto)   

Features

• 30 day satisfaction guarantee and a limited one-year warranty on parts and labor
• Powerful 5.0 amp, 1.1 Horsepower motor
• Low profile head with conventional spindle lock
• Compact and lightweight design
• Slide switch for one touch auto-return

Reviews (1)

good buy
I use the Makita grinder of this same size a lot at work, but when I decided to buy my own for use in myshop I bought this Hitachi model.Honestly I only bought the Hitachi because it was cheaper, but now that I've put some miles on it I like it as much or more than the Makita.The Hitachi has a better locking slide power button and feels more powerful.The only negatives are that it is slightly heavier than the Makita and that it sounds a little rough on the shutdown.Oh yes the lock button for changing discs is an excellent idea that works well.If you plan to use the machine as a sander,as I often do, the Makita sanding pad, discs, and lock nut fit this machine. ... Read more

Subjects:  1. Grinders    2. Angle Grinders   

Features

• 1" arbor
• Polycrystalline diamond tips
• 8 tooth design
• Dust reducing technology
• Self sharpening

Subjects:  1. Blades    2. Miter Saw Blades    3. 12-inch Blades    4. (Mitre Saws)    5. (Mitersaws)    6. (Mitresaws)   

Features

• BIM
• 12"
• Wood/Nail blade
• 6 TPI
• 5 pack

Subjects:  1. Blades    2. Reciprocating Saw Blades    3. Multipurpose Cutting Blades    4. (Sawzalls)    5. (Sawsalls)    6. (Recipracating)   

Features

• Horizontal vise assembly

Reviews (1)

This is a MUST
With the 1.5" high fence on the Hitachi Miter Saw, this is a MUST.I felt very uncomfortable holding a tall 3" workpiece perfectly vertical and this vise assembly would have made it much easier. ... Read more

Subjects:  1. Saws    2. Miter Saws    3. Miter Saw Attachments    4. (Mitre Saws)    5. (Mitersaws)    6. (Mitresaws)   

Features

• 2 1/2-inch
• 15-gauge finish nails
• Electro galvanized
• 3,000 count
• Fits NT65MA and NT65MA2

Subjects:  1. Hardware    2. Fasteners    3. Nails    4. Collated Nails    5. Finish Nails    6. (Colated)