Features

• Designed to double as plumb bob
• 100' chalk cord reel with 4 oz. Blue chalk combo
• Precision made, self-chalking reel provides sharp, clear line every time
• Slide-fill opening for no mess chalk refills
• 4 oz. plastic squeeze bottle of blue chalk with no-spill snap cap; practically damage proof

Reviews (1)

Handy Tool
This line-snapper is a handy tool for use when you need to record a removable line on walls for painting, or floors for tiling.

Be careful when first using this tool after applying the chalk.I would perform a few practice snaps to make sure the chalk doesn't clump.I had a clumping problem with the chalk the first few times I used this line-snapper.

Also, be aware that for any appreciable length, this is a two-person operation. ... Read more

Subjects:  1. Measuring & Layout Tools    2. Chalk Lines    3. (String Box)    4. Marking Tools   

Features

• 301 lbs. capacity, stable 2-step stepstool
• Easy to set-up or fold down for convenient and lightweight carrying
• Stands upright on its own when folded
• Slim width takes up minimal storage space in home
• Four skid resistant foot pads

Reviews (1)

Great little step stool!
I've had this stool for a couple years & am constantly suprised at the uses I am able to find for it.It is very stable & folds up easily to a very slim silhouette - easy for putting away in a closet. ... Read more

Subjects:  1. Ladders    2. Step Ladders    3. (Stepladders)    4. (Latters)   

Features

• For use with the Quick-Vise
• Features a unique, locking vise system for maximum portability
• Quick release locking mechansim
• Non-marring jaw pads
• Over a quarter ton of clamping pressure

Features

• 10" curved jaw with wire cutter, 7" straight jaw and 6" long nose
• Dual durometer grips are made of a no-slip rubberized material
• Cushioned handles make it easier to apply additional pressure
• Greasy, oily hands won't slip

Subjects:  1. Hand Tools    2. Pliers    3. Plier Sets   

Features

• Industrial-grade metal clasps provide added strength for heavy loads
• Small, lightweight and strong; zippered for secure transport
• Padded handle features reinforced stitching for extra strength
• Extra-wide opening provides easy access to all tools
• 600D Polyester is durable and virtually maintenance free

Subjects:  1. Tool Storage    2. Tool Bags    3. (Toolbags)   

Features

• 6 hole sizes
• Easy-to-sharpen, non-skid tip
• Single-fluted cutting edge
• 3 flatted shank
• Full lifetime warranty

Subjects:  1. Drill Bits    2. Drill Bit Sets    3. (Drils)    4. Brad-Point Bits   

Features

• Industrial grade metal clasps
• Kurt Busch signature series
• Made of 600D polyester
• Wide mouth opening
• Heavy duty stitching

Subjects:  1. Tool Storage    2. Tool Bags    3. (Toolbags)   

Features

• Non slip rubberized grip
• Convenient wire cutter
• Involute jaw curve
• Adjusting screw gives exacting pressure
• Guarded release helps keep work safe and fast

Reviews (1)

Get a Grip With a Vise Grip
This size vise grip is very useful as a small pipe wrench when working with <3/4" threaded pipe.I have also used mine to turn rounded nuts that a regular wrench can no longer grip.I have used it as a weldingclamp, a pipe vise (clamped in my workmate), a nail puller and a substitutefaucet handle.

This is a durable and versatile tool that you willconstantly find new uses for.It does require a second hand to activatethe release if you have it screwed down really tight.

Man cannotsurvive without an assortment of Vise Grips! ... Read more

Subjects:  1. Hand Tools    2. Pliers    3. Locking-Jaw Pliers   

Features

• 25lb
• Representing the standard for excellence
• Temporary line

Subjects:  1. Measuring & Layout Tools    2. Chalk Lines    3. (String Box)    4. Work Support   

Features

• Powder Coated (gray) steel
• Everything you need to organize your space off the floor
• Holds 300 pounds per shelf if properly installed into studs
• Tight mesh design allows for small parts to be placed on shelf
• Shelving can be cut to fit any space

Reviews (1)

Great product but some important information is missing
Here are the important bits:
- The shelf width is 48"
- The shelf depth is 16"
- The uprights (i.e. the vertical rail into which the shelf brackets are attached) are 25" tall which gives you a little less than 2' of space between your two shelves if you mount them at the extreme top and bottom of each upright
- This set is really 2 separate units each with 2 shelves.The picture just happens to show one unit mounted right on top of the other.
- The Amazon parts list is incorrect.This item comes with 4 uprights and not 2.

I have two of these kits installed in my garage and they're great.They installed fairly easily with just a drill, a level, and some other small tools.I can only assume that the 300 lbs. max load per shelf is accurate because mine are totally loaded up with full cans of paint, washer fluid and other heavy items and they're showing no signs of sagging or pulling away from the wall.

You can buy most of the various bits and pieces of this system at certain hardware and home stores, but you'll be paying a lot more.The 16" shelf brackets alone (8 are included) usually cost $4-5 each. ... Read more

Subjects:  1. Rubbermaid    2. (Rubber Maid)    3. Hardware    4. Shelving Hardware   

Features

• 10" curved jaw with wire cutter, and 5" curved jaw with wire cutter
• Dual durometer grips are made of a no-slip rubberized material
• Cushioned handles make it easier to apply additional pressure
• Greasy, oily hands won't slip

Subjects:  1. Hand Tools    2. Pliers    3. Plier Sets   

Features

• 18" long, 1/2" diameter, .370" shank
• Hole in flute (head) makes it easy to pull wires through hole in wall
• Boring action is faster, smoother, cleaner in most every material encountered in wiring installations
• Longer flute section for deeper boring
• Special flute finishing process assures quick chip removal, no clogging, no binding

Subjects:  1. Drill Bits    2. Boring Bits    3. (Drils)   

Features

• Black oxide coating for added corrosion resistance
• High speed steel for smooth, fast drilling
• 18-piece set to cover a wide range of applications
• Case with rubberized grip and sliding latch
• Sliding latch design provides added security

Subjects:  1. Drill Bits    2. Drill Bit Sets    3. (Drils)   

Features

• Improved features for an overall 50% greater load capacity than the closest competitor
• Rubberized non-slip handle for positive clamping grip
• Beveled handle for applying more torque
• Heat-treated for 33% less bar deflection
• New handle design for easier torque and reduced operator fatigue

Subjects:  1. Clamps    2. Bar & Pipe Clamps   

Features

• 7-1/2" overall length with a 4-1/2" twist, 1" diameter cutter and 5/16¿ hex shank, comes in a plastic pouch
• Heat-treated full length for added strength
• Coarse screw point for fast boring in all types of wood
• 7-1/2" overall length can bore through up to three studs

Subjects:  1. Drill Bits    2. Boring Bits    3. (Drils)   

Features

• 17" overall length with a 12" twist, 1" diameter cutter and 5/16" hex shank
• For use in drilling applications where small nails and other foreign materials may be encountered
• Single twist type with single cutter and side lip
• Hollow center twist design for fast, continuous flow of chips
• Medium-fast screw pitch, heat-treated full length, guaranteed consistent Rockwell hardness

Subjects:  1. Drill Bits    2. Ship Auger Bits    3. (Drils)   

Features

• Set includes 2 each of: 1.5", 2", and 4" Handi-Clamps
• Versatile enough to tackle most clamping tasks
• Constructed of high-tech resin and a heat-treated bar for strength and durability
• Non-marring pads to protect workpieces

Subjects:  1. Clamps    2. Bar & Pipe Clamps   

Features

• 17" overall length with a 12" twist, 1/2" diameter cutter and 5/16" hex shank
• For use in drilling applications where small nails and other foreign materials may be encountered
• Single twist type with single cutter and side lip
• Hollow center twist design for fast, continuous flow of chips
• Medium-fast screw pitch, heat-treated full length, guaranteed consistent Rockwell hardness

Subjects:  1. Drill Bits    2. Ship Auger Bits    3. (Drils)   

Features

• Made of high-speed steel for positive fastening and durability
• 4 magnetic nut setters in most popular sizes
• 21 contractor grade insert bits and 4 double-end power bits
• Powerful magnetic bit case with rubberized grip and sliding latch
• 30-piece driving set for secure hardware attachments

Subjects:  1. Screwdriver Bits    2. Screwdriving Sets    3. (Screw Drivers)   

Features

• Full lifetime warranty
• 11", with a jaw adjustment of up to 4", and a throat depth of 2 5/8"
• Adjusts to the correct opening
• Locks with one hand
• Easily adjusted to various sizes

Reviews (1)

Your Price
This is the best tool for tempory clamping of items to be welded drilled,or bonded up to 5" across clamped area.

...I would like to find spring kits for my six pair I use all the time at my work I have not been able to find a dealer in Phoenix who carries the springs. Any help welcome.

Thank you,

Michael Forbes ... Read more