Features

• Enlarged handle
• Double threaded screw thread

Subjects:  1. Clamps    2. C-Clamps   

Features

• 7-1/2" overall length with a 4-1/2" twist, 3/4" diameter cutter and 5/16" hex shank, comes in a plastic pouch
• Heat-treated full length for added strength
• Coarse screw point for fast boring in all types of wood
• 7-1/2" overall length can bore through up to three studs

Subjects:  1. Drill Bits    2. Boring Bits    3. (Drils)   

Features

• Soft-Grip beveled handle
• Heat treated bar
• Double threaded screw thread

Subjects:  1. Clamps    2. Bar & Pipe Clamps   

Features

• Thin kerf design
• Hardened plate
• Specially engineered heat vents
• Unique shoulder design
• C3 carbide tips

Subjects:  1. Blades    2. Circular Saw Blades    3. 6.5-inch Blades    4. (1/2)   

Features

• Full lifetime warranty
• U-shaped jaws
• Adjusting screw gives exacting pressure
• Guarded release helps keep work fast and safe
• Powerful locking mechanism

Subjects:  1. Hand Tools    2. Pliers    3. Locking-Jaw Pliers   

Features

• 5lb
• Representing the standard for excellence
• Permanent bright line

Subjects:  1. Measuring & Layout Tools    2. Chalk Lines    3. (String Box)    4. Work Support   

Features

• Six popular sizes
• Includes 3/8", 1/2", 5/8", 3/4", 7/8", and 1" and rack
• Patented micro-groove point and cutting edge with extended spurs
• For all 1/4" and larger electric drills
• Bores two times faster, lasts three times longer

Reviews (1)

Another boring review
Sorry I couldn't resist. These bits are an old standby. They work great insoft materials like wood and plastic. Speedbor is very accurate. If you hita nail they get dull fast but you can resharpen them. Even if you don'tyou're not out much. I know a lot of guys that use these for making custombits. maybe they grind a taper on them for candle holders or they cut theshanks for stubby bits. The list goes on and on. I threw away my rack. Iwrapped the bits in rubber bands so they would stay together. The wholebunch fits nicely in my Makita box. A must have item. ... Read more

Subjects:  1. Drill Bits    2. Drill Bit Sets    3. (Drils)    4. Boring Bits   

Features

• Easy-to-sharpen, non-skid tip
• Single-fluted cutting edge
• Multiple steps
• Full lifetime warranty

Subjects:  1. Drill Bits    2. Drill Bit Sets    3. (Drils)   

Features

• Includes 10WR, 6LN, 7WR, 10LW, 7LW, 5WR, and 12LC
• Hardened tooth design allows grip from any angle
• Made from a high grade alloy steel which is heat treated for maximum toughness and durability
• Quick release button which removes pressure immediately

Subjects:  1. Hand Tools    2. Pliers    3. Plier Sets    4. Tool Sets   

Features

• Both Vise-Grips have a wire cutter
• Adjusting screw for exacting pressure
• Made of high grade alloy steels
• Rubbermaid lunch cooler included

Subjects:  1. Work Support    2. Bench Vises    3. (Vices)   

Features

• Set includes 1/4", 1/2, 3/4", and 1" chisels
• Beveled edge
• Cellulose acetate butyrate is designed for firm gripping and robust work as well as delicate work
• Sturdy neck and bolster for strength and shock absorption
• The long sturdy tang keeps the handly firmly attached to the blade

Reviews (1)

photo error
This photo no correspond to the product. The item is a simple blue chip set but more expensive. ... Read more

Subjects:  1. Hand Tools    2. Wood Chisels    3. (Chisells)   

Features

• 1" diameter and 6" long
• Micro-groove point and cutting edges with extended spurs for faster, cleaner boring action
• Forged in one piece from Irwin's own special grade tool steel
• Heat-treated full length for extra overall strength
• For 1/4" and larger electric drills

Features

• Made in USA
• Made of high grade alloy steels
• Adjusting screw gives exacting pressure
• Guarded release helps keep work fast and safe
• Tray included

Subjects:  1. Hand Tools    2. Pliers    3. Locking-Jaw Pliers    4. Plier Sets    5. Tool Sets   

Features

• Full lifetime warranty
• 8", 3 1/8" jaw width, 1 3/4" throat depth
• Locks to work with powerful grip
• Makes bread pan corners, and can crimp, double crimp
• Stretches upholstery webbing

Reviews (1)

More Uses Than You'd Think
Vise-grip products are pretty sturdy and can take a lot of abuse.The sheet-metal tool is no exception.It not only will clamp and hold a wider surface area than other grips, you can use it to get a nice, crisp fold ina variety of metals.Sheets that are longer than the jaw of the tool arenot a problem--you can just move the tool along and there is no buckle orfold between the placements.

I'm a tinsmith, and I use this tool prettyregularly.There are more expensive such tools around, with compoundaction, etc., but unless you use such a tool professionally and/or onextremely heavy-duty material, this is the best bang for the buck.And,once you have one, you'll wonder how you went so long without it. ... Read more

Subjects:  1. Locking-Jaw Pliers    2. Hand Tools    3. Pliers   

Features

• Thread sizes: 6-32 NC, 8-32 NC, 10-24 NC, 10-32 NF, and 1/4"-20 NC
• 5/8" Hexagon dies
• Plain die stock 5/8" hex
• T-Handle tap wrench

Reviews (1)

A really great Tap and Die set
I have had this same exact set for over ten years and have never broke one. HANSON makes the taps and dies for SNAP-ON so you know they are quality! ... Read more

Subjects:  1. Drill Bits    2. Boring Bits    3. (Drils)   

Features

• 7-1/2" overall length with a 4-1/2" twist, 7/16" diameter cutter and 7/32" hex shank, comes in a plastic pouch
• Heat-treated full length for added strength
• Coarse screw point for fast boring in all types of wood
• 7-1/2" overall length can bore through up to three studs

Subjects:  1. Drill Bits    2. Boring Bits    3. (Drils)   

Features

• Full lifetime warranty
• Single spur design
• Coarse screw point
• Full length heat treatment
• Solid center design

Subjects:  1. Drill Bits    2. Ship Auger Bits    3. (Drils)   

Features

• Built to last a lifetime
• Locks on to three sides of a hex fastener
• Tremendous force can be applied without marring or slipping off the fastener
• Adjusts to over 16 different standard and metric wrench sizes
• Jaw tips are knurled for better gripping, includes a wire cutter

Subjects:  1. Hand Tools    2. Pliers    3. Locking-Jaw Pliers   

Features

• 3-1/2¿ overall length, 2-1/8¿ diameter, .375¿ round shank
• Bores precision holes at any angle
• Extra sharp cutting edges drill smooth, flat-bottomed holes
• Fit 3/8¿ drills and drill presses

Subjects:  1. Drill Bits    2. Forstner Bits    3. (Drils)