Features

• JACK hand saws feature a triple ground tooth configuration
• Quick-Grip clamps are made with high-tech resin and heat-treated bars for strength and durability
• Marples chisels feature a beveled edge for use in multiple applications

Subjects:  1. Hand Tools    2. Tool Sets   

Features

• Heat treated full length for extra overall strength
• Includes 3/8", 1/2", 5/8", 3/4", and 1" and 6" drill bit extension, plus pouch
• Patented micro-groove point and cutting edge with extended spurs
• For all 1/4" and larger electric drills
• Bores two times faster, lasts three times longer

Subjects:  1. Drill Bits    2. Drill Bit Sets    3. (Drils)    4. Hex Shank Drill Bits    5. Drills   

Features

• 7-1/2" overall length with a 4-1/2" twist, 9/16" diameter cutter and 5/16" hex shank, comes in a plastic pouch
• Heat-treated full length for added strength
• Coarse screw point for fast boring in all types of wood
• 7-1/2" overall length can bore through up to three studs

Subjects:  1. Drill Bits    2. Boring Bits    3. (Drils)   

Features

• Full lifetime warranty
• Made of high grade alloy steel
• Adjusting screw
• Made in USA
• Quick release

Subjects:  1. Locking-Jaw Pliers    2. Hand Tools    3. Pliers   

Features

• Fine point
• Permanent on most hard to mark surfaces
• # 1 permanent marker in the world

Subjects:  1. Measuring & Layout Tools   

Features

• Soft-Grip beveled handle
• Heat treated bar
• Double threaded screw thread

Subjects:  1. Clamps    2. Bar & Pipe Clamps   

Features

• Thin kerf
• Construction carbide tips
• Face ground teeth
• Fully hardened plate

Features

• Heat treated full length for extra overall strength
• Includes 1/4, 5/16, 3/8, 7/16, 1/2, 9/16, 5/8, 11/16, 3/4, 13/16, 7/8, 15/16, and 1"
• Patented micro-groove point and cutting edge with extended spurs
• For all 1/4" and larger electric drills
• Bores two times faster, lasts three times longer

Features

• Black Oxide
• High Speed Steel
• Fractional Straight Shank
• Jobbers Length
• 118 Degree tip

Subjects:  1. Drill Bits    2. Drill Bit Sets    3. (Drils)   

Features

• 17" overall length with a 12" twist, 7/8" diameter cutter and 5/16" hex shank
• For use in drilling applications where small nails and other foreign materials may be encountered
• Single twist type with single cutter and side lip
• Hollow center twist design for fast, continuous flow of chips
• Medium-fast screw pitch, heat-treated full length, guaranteed consistent Rockwell hardness

Subjects:  1. Drill Bits    2. Ship Auger Bits    3. (Drils)   

Features

• Full lifetime warranty
• 4-1/4" max. jaw opening; 2-pack
• Quick-Grip Micro Bar Clamps have positive locking action to hold work tight
• Ideal for clamping small and odd shapes securely for home, crafts or hobby work
• Quick-Grip Micro Bar Clamps can also be used as spreaders

Reviews (2)

Pressure?What pressure?
Unlike the previous reviewer I felt that these delivered very little clamping pressure.I own several of the larger Irwin clamps and compared to them this is one very disappointing clamp.I'll keep the two I've got for special situations where a little clamping will do, but certainly will not buy any more.

Good clamps, but there are better on the market!
These are handy little Quick-Grip micro clamps have a lot of gripping power for their small size and weight.The ability to use them as aspreader clamp (by reversing the front clamp pad) is a nice feature.I usemine for building small models and the odd little project.These would begreat if you are also into crafts, as they are much easier to use thansmall c-clamps and generally weigh less.The best feature of this productis its ability to quickly adjust/clamp/release single-handedly.The yellowcolored rubber jaws are great, dissipating the pressure over a large areaso as not to damage your work, and best of all, glue will not readilyadhere to them.I've exerted tremendous force with these clamps and havenever had one slip or flex/deform under pressure.I have four of these inmy shop and find them very useful.

Why did the Quick-Grip Micro's onlyreceive 4 stars you might ask?The answer is simple - the Jorgensen micro"E-Z Hold II Mini Bar/Spreader Clamp" is a superior clamp in myopinion, because it has a greater capacity, is less expensive, and best ofall, the front clamp pad is adjustable so you can "balance" theclamp on your project if need be.The E-Z Hold II mini will do everythingthe Quick-Grip micro's will, only quicker, because, unlike the Quick-Grip,the front pad on the E-Z Hold doesn't require any tools to remove or adjustit.This feature makes the Jorgensen E-Z Hold the superior"small" clamp. ... Read more

Subjects:  1. Clamps    2. Bar & Pipe Clamps    3. Spreader Clamps   

Features

• One-hand operation with a pistol grip advance and quick release trigger
• Swivel head and serrated jaw
• Easily clamps multiple surfaces with over 600 pounds of force
• Non-marking removable pads

Reviews (1)

Another great Clamp
As with the entire quick grip products the features that should entice you to buy and use the Quick-Grip 5912ADV 12" Advantage Power Clamp are the ease of adjustment and the fact that it won't mar even the softest of wood yet still provide ample force for your project. The screw adjustment makes it even easier to make finer adjustments. People with low hand strength or hand pain can use the trigger ratchet used for the adjustment with ease.It only requires a firm squeeze just over the pressure used for scissors ... Read more

Subjects:  1. Clamps    2. Bar & Pipe Clamps   

Features

• Round beachwood head
• Ash handle to absorb shock
• Head diameter of 4" around

Subjects:  1. Hand Tools    2. Hammers    3. Mallets   

Features

• Precision tensioned and balanced plate for an accurate and true cut
• Construction Micro grain carbide teeth for longer life
• Thin kerf for fast cuts
• Fully hardened plate runs truer longer
• #400 grit diamond ground teeth for faster, cleaner cuts

Subjects:  1. Blades    2. Circular Saw Blades   

Features

• Soft-Grip beveled handle
• Heat treated bar
• Double threaded screw thread

Subjects:  1. Clamps    2. Bar & Pipe Clamps   

Features

• 25lb
• Representing the standard for excellence
• Permanent bright line

Subjects:  1. Measuring & Layout Tools    2. Chalk Lines    3. (String Box)    4. Work Support   

Features

• 5-gallon mixer
• Fits 3/8" drill for blending paint perfectly
• Mixes driveway coatings, adhesives & other heavy materials including drywall mud

Features

• Easy-to-sharpen, non-skid tip
• Single-fluted cutting edge
• Multiple steps
• Full lifetime warranty

Subjects:  1. (Drils)    2. Drill Bit Sets    3. Drill Bits    4. Brad-Point Bits   

Features

• Kurt Busch signature series
• Adjusting screw
• Made of high grade alloy
• Made in USA

Subjects:  1. Hand Tools    2. Pliers    3. Plier Sets   

Features

• Original thin kerf
• C-3 carbide-tipped teeth
• Specially engineered heat vents prevent warping
• Hardened plate runs truer and avoids warping

Subjects:  1. Blades    2. Circular Saw Blades