Features

• 1-1/4 inch bore
• Molding-master shaper system set
• 5 7/16 in. maximum diameter
• 1-7/8 inch height

Subjects:  1. Profile Knives    2. (Shaper Cutters)    3. (Profile Blades)    4. (Knife)   

Features

• Unparalleled versatility from 40 pairs of interchangeable high-speed steel profiles plus blank knives that can be ground to custom shapes
• Interchangeable knife systems offer remarkable safety and simplicity
• 4 3/4 in. maximum diameterEach knife is precisely positioned in the cutterhead--no need to painstakingly match the projection of one knife with the other
• Knives are locked into a dovetail-shaped channel in the cutterhead
• Solid wedges with 2 set screws fill the the channel after the knives are in place so there's no chance of the cutter leaving the cutterhead

Subjects:  1. Shaper Cutters    2. (Knives)    3. (Blades)   

Features

• 1/4-inch shank
• 15/64-inch cut diameter
• 1-inch cutter length
• 1/4-inch ply thickness
• Solid carbide bit

Subjects:  1. Routers    2. Router Bits   

Features

• 1/2-inch shank bevel & radius kitchen set
• Includes carbide tipped bits
• All your door and drawer needs
• Comes in hardwood case

Subjects:  1. Routers    2. Router Bits   

Features

• 1/2-inch shank
• Downshear action
• 3/4-inch cutting diameter
• 3/4-inch bearing
• 1-inch cutting length

Subjects:  1. Routers    2. .50-inch Shank Bits    3. (1/2)   

Features

• Fast and efficient straight cuts
• 1/2-inch shank
• 31/64-inch cutter diameter
• 1-inch cutter height
• Fast efficient production

Subjects:  1. Routers    2. .50-inch Shank Bits    3. (1/2)   

Features

• 1/4-inch shank
• 31/64-inch cut diameter
• 1-inch cutter length
• 1/2-inch ply thickness
• Fast, efficient production

Subjects:  1. Routers    2. .25-inch Shank Bits    3. (1/4)   

Features

• Fast efficient production
• 1/4-inch shank
• 23/32-inch cut diameter
• 1-inch cutter length
• 3/4-inch ply thickness

Subjects:  1. Routers    2. .25-inch Shank Bits    3. (1/4)   

Features

• 1/2-inch shank
• 15/64-inch cut diameter
• 3/4-inch cutter length
• 1/4-inch ply thickness
• Solid carbide bit

Subjects:  1. Routers    2. .50-inch Shank Bits    3. (1/2)   

Features

• 1/2-inch shank standard kitchen set
• Includes carbide tipped bits
• All your door and drawer needs
• Comes in hardwood case

Subjects:  1. Routers    2. Router Bits   

Features

• Design for rails on full-sized doors
• Use with (444-015) Small Panel Frame
• 3 templates in set
• Carving size, 22-1/4" by 4-3/4"

Subjects:  1. Routers    2. Templates   

Features

• 7/8-inch cutter height
• 1/2-inch shank ogee set
• Use stock from 3/4 to 7/8-inch thick
• Produces precise joints in hard or softwood
• 1-3/4-inch cutter diameter

Reviews (1)

One of the best door sets
I purchased this set which included free ogee raised panel bit.I have found the bits to extremely sharp and wel made.The low friction coating (Jesada White) is pleasing to the eye and enables a smooth cutting action.Even on end grain cuts, the bits produce a wonderfully finish. ... Read more

Subjects:  1. Routers    2. Router Bits   

Features

• Create six profiles with each bit
• 1/2" shank
• 1/4, 3/8, and 1/2" radius cuts
• Highest quality steel and carbide

Subjects:  1. Routers    2. Router Bits   

Features

• Three straight & 10 dovetail bits
• Cut every Leigh joint
• Hardwood case included

Reviews (2)

More Info
DO NOT POST THIS REVIEW... it's intended for your staff...

Suggestion:Provide more information about the Jesoda 600-502 product...for example, are the shanks1/4"3/8"1/2"or combination thereof...are they carbide tip'd, etc.

Worth the extra dough, and then some
I can't say I bought these as a set but it would have saved me some dough if I did. I probably own 35-40 Jesada bits, and as many again from other manufacturers. I've tried many brands - CMT, Whiteside, Amana, MLCS, PC, and even foolishly chucked up a Craftsman bit for a good two minutes before it burned up. Jesada makes a big deal about their carbide and their grinding and sharpening process. I know my first reaction was that this was some kind of fancy sales pitch, but now that it's a few years down the road from that first impression, I'll stand by them and say that Jesada bits really stand up. They come to you sharp as sin and keep the edge longer than anything else I've found. I recently did an enormous blanket chest out of 5/4 Honduran Mahogany (if you've worked with it, you probably know why this is significant) and cut 112 dovetails with a fairly dated bit without having a single one splinter on me. They are admittedly pricey up front, but my experience is that bad tools make bad work, and bad work doesn't make for many return customers. ... Read more

Subjects:  1. Routers    2. Router Bits   

Features

• 1/2-inch shanks
• Eight piece set
• Six dovetail & two straight bits
• Perfectly suited to your Incra or Jointech jig
• Hardwood carrying case included

Subjects:  1. Routers    2. Router Bits   

Features

• 1/2-inch shank
• Three bit set
• Includes 1/4, 3/8, and 1/2-inch radius bits
• 3/8-inch bearing included
• Convert each bit to a beading bit

Reviews (1)

Super Roundover Bits!
These bits have Jesada's typical mirror-finish on the cutting edges.They cut clean and fast in my Dewalt 2hp plunge router.The guide bearings can be removed with the supplied allen wrench.They even had an extra machinescrew in the kit.If you want quality, heavy-duty, long cutting bits, buyJesada! ... Read more

Subjects:  1. Routers    2. Router Bits   

Features

• Design for upper panels on full-sized doors
• Use with (444-005) Large Panel Frame
• 2 templates in set
• Carving size, 30-3/16" by 6-1/2"

Subjects:  1. Routers    2. Templates   

Features

• 45-degree cutter angle
• Use with stock from 3/8 to 11/16-inch
• 1/2-inch shank
• 2-inch cutting diameter
• 23/32-inch cutter height

Subjects:  1. Routers    2. .50-inch Shank Bits    3. (1/2)   

Features

• 7/8-inch cutter height
• 1/2-inch shank standard set
• Use stock from 3/4-inch to 7/8-inch thick
• Produces precise joints in hard or softwood
• 1-3/4-inch cutter diameter

Subjects:  1. Router Bits    2. Routers   

Features

• Fits all routers with a 1-3/16-inch baseplate hole
• Includes two locknuts
• 5/16-, 3/8-, 7/16-, 1/2-, 5/8-, 3/4-, 51/64-, and 1-inch outside diameters
• 15/64-inch barrel length
• Solid brass

Reviews (5)

So-SoRouter Guides
I just recieved my Jesada 10 pc. router guide kit, and was somewhat disappointed.I was expecting them to come in a case to protect the softer metal they're made of, and on opening the kit, I found that the threads on the guides were somewhat tight, which is not a good thing when you're trying to put them on a router in fairly close quarters.I haven't checked them for accuracy of dimension, but hopefully, they got that part right.There is also some left over solder on the insides of the guides.Also, there is some tarnishing starting on the brass already. I think Jesada needs to look at their finishing process on this item very hard. This surprises me because I just got one of Jesada's raised panel shaper cutters, and it's great - does a fine job, and is very smooth.

No Quality Control Here
This was the first item I have purchased from Jasada, and I have since cancelled all other items from this company.Of the 8 templates in the set, 6 had defective threads and were unusable. I ordered them following other reviews, but beware, there is obviously no quality control process.

Great quality but fall short on size information and storage
My wife bought this set for me last Christmas from my wish-list.I chosethese guides over other brands because of Jesada's reputation for quality,they are made of brass and won't rust, and all of them have a 1/4 inchbarrel length.(Other brands vary in length.) They are indeed a qualityproduct.But I do think they should have the size printed on the guide(they don't) and come with a fitted storage tray.(I would have preferredto give them 4 1/2 stars due to these complaints, but that score is notavailable on the ranking system. ... Read more

Subjects:  1. Routers    2. Templates