Features

• FREE SHIPPING!

Features

• Cuts 16 gauge mild steel and 18 gauge stainless
• Also cuts spiral pipe
• Metal doors and metal studs
• Portable

Reviews (4)

Kett , Model K442 16-gauge variable speed shears
For a living , I work with sheets of copper , aluminum , and sheet metal. I started out useing air shears. Then went to a better pair of air shears. They worked ok. But taking the compressor , hoses , etc. to every job site got old in a hurry. Not to mention that the compressor didn't quite keep up with the air shears. After 50+ copper roofs , I thought I would try electric shears. So I did my reserch. These Kett shears were my choice. Let me tell you. These Kett shears make the air shears look sick. No comparison. The Kett shears are variable speed , and very powerfull. Lots of power to spare. No heavy air hose to drag and catch on things. No compressor and hoses to lugg around. Etc. , Etc.. I would recommend these shears to anyone who wants a good quality pair of shears. I rated these shears at a "5" , and now I know why the others had also rated them at a "5". The metal box (an option) is a little big for the shears , but it works. The box is very well built , and is worth the money.

Like a Hot Knife Thru Butter
Wish I would have purchased this Kett shear months ago.Can't believe the speed and smoothness of the cut.Quite a time saver!

the best tool for the job
I do a lot of diffrent types of things from autobody to home repair and I have used kettshears at the ship yards before this pair beets them all cts through steel like butter and is the best tool for auto restro ... Read more

Subjects:  1. Kett    2. (Ket)    3. Shears   

Features

• Heads easily changed
• Total cutting capability
• Fast adjustment
• Easy-change heads
• Cuts 18-gauge sheet metal

Reviews (2)

so far not so good
The first time I used this tool with the nibbler attachment I had a problem with the metal shavings galding to the punch.I have to use tapping compound to keep this from happening. I build metal building and use thistool on rather light,26 and 29 gage sheet metal.I am going to contact thecompany and see if they have any suggestions.

Good Quality at a resonable price
I would highly recommend this tool for the do-it-yourselfer who wants a professional quality tool to do sheet metal cutting on a not so regular basis. It is made to much the same standards as Ketts commercial productsbut at half the cost. ... Read more

Subjects:  1. Kett    2. (Ket)    3. Shears   

Features

• Portable
• Lightweight
• Pistol grip
• Cuts over 150 inches / minute
• Leaves sheets cool and burn free

Reviews (4)

This shear is great!!!
I purchased this shear for a school shop. We have put it through all the paces in the shop.It hasn't faultered once and doesn't show any signs of wear. We have cut 14 all the way down to 22 gauge steel and have not had any issues with it.I talked to several shop owners who use the Kett shears for various materials.None of them had any complaints about the shear.I would talk to people in your area about shears and see what they are using.I am more than impressed with the one I purchased.

buy a dewalt
My new Kett KE440 shears quit after one hour of use.Motor wasn't getting juice, loose wire.It took Kett an unreasonably long time to turn around the warranty repair, and they had to be called once and asked where is it.Seems the product quality is low, and the people aren't too concerned about their buyers.Buy a DeWalt, I did.

Kett KE440 14-Gauge Power Shears A nice addition to my tools
I read the only review of this product before I ordered mine.. and the previous reviewer seems not to like his... so with a slight amount of trepidation I ordered a shear of my own.... ( I already own the 18 guage version and the 16 gage additional head) I am currently working on a project covering skateboard ramps with 14 guage steel to protect them from the elements... I didn't think my 16 guage shear was going to be long for this world using it on the heavier metal...So I got this one... It is doing an awe-inspirng job.... I have used in the past the shears with two jaws... like the Bosch and the Dewalt....and for doing tight radius' they are great... but these cut straight lines effortlessly and will do larger radii quite well. On a skate ramp 5 foot radii would be tight... I am thoroughly satified with these shears and would highly recomend them to anyone...The Variable speed option is great.... I didn't think I would care about it....I would however ..based on my previous experience with Kett products, get a spare set of teeth(jaws?) because surprizes happen... All in all I'm very happy.. I would also reccomend the metal case... It's a handy place to keep your spare cutters and the grease... ... Read more

Subjects:  1. Kett    2. (Ket)    3. Shears   

Features

• 3 piece shear blade set
• Fits K442

Subjects:  1. Kett    2. (Ket)    3. Shears   

Subjects:  1. Kett    2. (Ket)    3. Shears   

Features

• K200 kett shear with carrying case
• Double-cut shears
• Cut sheet metal in straight or contour lines at 108 inch per minute
• Also cuts plastic or formica up to 3/32 inch thick

Reviews (1)

good tool...........btu a little rough
i am a cabinet installer and counter top fabricator.i bought this shear for trimming laminates......the trimmer head does chip out a little when trimming p/lam.it does trim well but i cannot say that it is top notch..it will do the job for you......and is great for metal.....btu with all p/lambe careful ... Read more

Subjects:  1. Kett    2. (Ket)    3. Shears   

Features

• Nibbler attachment for the K200 shears
• Works great for corrugated material
• Works great for curved cuts or installing switch & lamp boxes
• Fast adjustments

Subjects:  1. Kett    2. (Ket)    3. Shears   

Features

• Doesn'twarp or bend
• Quick and quiet
• No hardened or burred edges
• Straight or contour lines in 180 inches/minute
• Fast adjustments

Reviews (1)

Good product
Cuts like a hot knife through butter. Great for heavy studs. ... Read more

Subjects:  1. Kett    2. (Ket)    3. Shears   

Features

• FREE SHIPPING!

Features

• Punch for nibbler attachment
• Fits Kett 1020K

Subjects:  1. Kett    2. (Ket)    3. Shears   

Features

• Die for nibbler

Subjects:  1. Kett    2. (Ket)    3. Shears   

Features

• Cuts 1/2-inch fiber-cement, siding, and backer board
• Electric variable-speed 5.5 amp motor for powerful cutting action
• Snip-action cutting creates no dust at all
• Heavy-duty steel shear head built to last

Reviews (4)

Cement Board Kutter
Used the shear to cut 1/4" cement board for flooring underlay, it cut like going through butter.I was even able to do some simple cut-out around vent holes.If you are cutting cement board, buy or rent this tool, it makes cutting cement board a breeze with no airborne dust.I have used an abrasive blade and cutter in the past, this is the only way to go cutting cement board.The pins used to hold the blade can be abused; they work great as long as you let the shear do the work.

Kett and Porter Cable Shears (same difference)
I own a set of the Kett and the Porter Cable siding shears.They appear to be exactly the same.In fact I've replaced the blades in the Porter Cable with the Kett replacement set. You get the center and both side blades for less than you pay for just the PC center blade.
They both have the same problem. The bolts that hold the blades in are constantly breaking,and can be a pain to replace.

the kett 193
I DO EXTERIOR TRIM I ONLY DID 6 HOUSES APROX- 2500 PCS OF HARDIPLANK CUT AND MY SET IS ALL READY SITTING IN THE SHOP BROKE ... Read more

Subjects:  1. Kett    2. (Ket)    3. Shears   

Features

• 3 piece shear blade set center, left, right blades for K200

Subjects:  1. Kett    2. (Ket)    3. Shears   

Features

• Handy metal carrying case
• Fits Kett 16 gauge variable power shears (K442)
• Also fits Kett 14 gauge electric power sheers (KE440)

Subjects:  1. Kett    2. (Ket)    3. Shears   

Features

• FREE SHIPPING!