Features

• Supports and clamps workpiece at proper angle
• 12 clamp mounting positions
• Adjustable miter gage for angled work
• Large rear handle for a safe, comfortable grip

Reviews (6)

43-188 sled
The sled is great but the holdowns are the problem, as they dont release fully and if you adjust they dont hold enough!!!! I went to tigthen one down ad the aluminumm frame broke!!! too bAD fro a poorly designed clamps. I think China has influxed into Delta and ruined what was our best line of tools. (sigh)

Essential
This was one tough item to get.Nobody had it in stock, possibly becuase they can't make them fast enough.When I finally got it, I needed to diassemble it to clean all the packing oil off of it, then I cleaned it with my table saw top conditioner to stop it from rusting. After reasembling it and checking it for square and put it to use,It is completely beyond me why this tool is not shipped with ALL shapers!I agree that I would have bought another manufactures before Delta, but not because of quality (I am a Powermatic fan). There is no safer way to shape small objects then this jig!If you are new to the world of woodworking and have a shaper, it should be without question that you need this jig!Not just so you will be able to count to ten in the morning but because quality and speed are also dramatically increased!It is a shame I can't give it 6 stars.

Here is an option
I saw Norm Abrams use this jig on TV. The New Yankee workshop on their web site refer you to Eagle America, which at the time of this posting has it for half again as much money as here at Amazon. Shopping mania steps in, only momentarily, thanks to Amazon reviews, you realize this is not a high-end piece of gear. I guess cheaply made is the word I am looking for.
Ok so here is the problem, how do you do coping cuts in the end of a rail, and not have the piece walk away from the bit? (The bit tends to push the piece away from the fence line.) A sled seems like a great idea, that way the piece is not sliding across a surface, but rather riding on top of the sled.
The problem in using this for routing is that it raises the work piece 3/8", and that forces you to adjust the bit in your router 3/8 inch out of the collar, to make up for the thickness of the sled. With shapers and their increased capacity for higher cuts it isn't much of a problem, but for routing, that is a major limitation. Net result is less safety, and more vibration.
So that takes me to what I really want to tell you about, and that is the Delta 34-928 Deluxe Miter Gauge, and the 34-568 Miter Gauge Clamp. The clamping presses down on the rail that fits in your miter slot, and the work slides along the table surface. That gives you the deepest setting for your bit. Additionally, if you needed to make a pass using the same bit on a piece that you didn't want to put in the sled, you wouldn't have to change settings.
Delta offers this miter gauge and clamping kit with their cheesy miter gauge. What is interesting, and not explained, (I had to do some digging) is that the top of the line, deluxe gauge 34-928 works with the 34-568 clamp as well. That way you are getting the best miter gauge, with stops at all of the popular settings, and according to Delta guaranteed accuracy. The real bonus is that if you buy the two pieces separately, it is cheaper, even with the Deluxe, than it is to buy the cheesy one in the combo kit. (Prices always change, so check it out to see what is current.)
I have to be honest with you, I ordered the gauge, and clamp over 8 weeks ago, and still have not received them. I keep updating the order because I still want it. Even though it has been stating that it "usually" ships within 24 hours. What will happen is that 10,000 of them will arrive by ship, then their will be a glut. At least I will get a fresh one. :-)
I will update this review once I get my hands on it. From what I see from the clamp kit review, it does a good job. I'm not complaining about Amazon, I think their service is tops, just thought I would shed some light on the subject. Hope this helps.
... Read more

Subjects:  1. Jigs    2. Sliding Miter Jigs    3. (Sliding Mitre Jigs)   

Features

• Fits Delta 43-505 Router/Shaper to accommodate 1/2-inch shaper cutters
• Allows a wider variety of operations to be performed, including panel raising
• Installs easily in arbor assembly for quick set up

Subjects:  1. Shapers    2. Shaper Attachments   

Features

• Fits Delta 43-505 Router/Shaper for increased work surface
• 3/4" x 35-7/8" x 23-7/8" table supports larger projects
• Fiberboard construction for strength and stability
• Installs easily for quick set up

Subjects:  1. Shapers    2. Shaper Attachments   

Features

• Fits Delta 43-505 router/shaper table
• Trimmable for a custom fit to the bit or cutter for reduced chipping and splintering
• Constructed from plastic for easy trimming, will not damage cutters
• Fits cutters from 1/2- to 2-7/8" in diameter
• Replaces standard insert

Subjects:  1. Shapers    2. Shaper Attachments   

Features

• All-in-one design for convenient changing from shaper cutters to router bits
• Accepts 1/2" bore shaper cutters and 1/4-and 1/2" router bits
• Includes wrenches
• Fits Delta 43-355 wood shaper

Reviews (1)

Better than buying an expensive router table!
If you already have the Delta Shaper this stub spindle fits
(43.355) then you're already half way there!This item lets you use both 1/2" spindle shaper cutters and 1/4" or 1/2" router bits
Fit and finish of the accessory was very, very good.No idea if it is made offshore, but given Delta's track record the last few years it wouldn't surprise me.Nonetheless, it it a well made accessory and given the amount of machining to make it the price
Amazon charges is quite reasonable.

The stability and usability of the Delta shaper is far superior
to any router table setup I've seen yet.This accessory will let
you leverage your collection of router bits and avoid the high cost of seldom used shaper cutters.

Amazon was a little slower than usual getting me this item, but
then hardly any other online tool source could even order it!Kudos to Amazon for getting me this fine addition to my tool collection. ... Read more

Subjects:  1. Shapers    2. Shaper Attachments   

Features

• Large hand grip for comfortable, postitive control
• Provides greater cutting accuracy for end and angle cutting
• Clamps the workpiece securely for safer operation
• Sliding table design supports workpiece for a smooth sliding action
• 120-degree swing for a variety of angle cuts

Subjects:  1. Shapers    2. Shaper Attachments   

Features

• Set of three matched knives
• Cuts cove and bead moulding profile
• High-speed steel for durability and long lasting sharpness
• Installs easily on cutterhead with existing set screws
• Fits Delta moulding cutterheads

Subjects:  1. Profile Knives    2. (Shaper Cutters)    3. (Profile Blades)    4. (Knife)   

Features

• 1/2" diameter, 2-1/2" capacity under the nut
• Installs easily in place of standard spindle
• Tapered shaft is notched for a slip-free fit
• Fits Delta heavy-duty wood shapers 43-445, 43-455, and 43-460

Subjects:  1. Shapers    2. Shaper Attachments   

Features

• 3/4" diameter, 3-1/4" capacity under the nut
• Included as standard spindle on heavy duty wood shapers
• Tapered shaft is notched for a slip-free fit
• Fits Delta heavy-duty wood shapers 43-445, 43-455, and 43-460

Subjects:  1. Shapers    2. Shaper Attachments   

Features

• Set of three matched knives
• Cuts 3/16" triple bead profile
• High-speed steel for durability and long lasting sharpness
• Installs easily on cutterhead with existing set screws
• Fits Delta moulding cutterheads

Subjects:  1. Profile Knives    2. (Shaper Cutters)    3. (Profile Blades)    4. (Knife)   

Features

• 3/4" diameter
• Installs easily in place of standard spindle
• Tapered shaft is notched for a slip-free fit
• Fits Delta heavy-duty wood shapers 43-445, 43-455, and 43-460

Subjects:  1. Shapers    2. Shaper Attachments   

Features

• Adapts shaper for use with router bits
• Includes 1/4" and 1/2" collets for use with a wide variety of bits
• Installs easily in place of standard spindle
• Fits Delta heavy-duty wood shapers 43-445, 43-455, and 43-460

Subjects:  1. Shapers    2. Shaper Attachments   

Features

• Accepts 1/2" bore shaper cutters
• Includes mounting hardware and wrench
• Fits Delta heavy-duty shapers

Subjects:  1. Shapers    2. Shaper Attachments   

Features

• Fits Delta 43-188 sliding shaper jig
• Adds extra clamping power to the sliding shaper jig
• Installs easily into pre-drilled mounting holes
• Quick-release design for easy adjustment
• Flip lever clamp for quick clamping

Reviews (1)

Other Use
According to Delta, this clamp may also be used on the miter gage for 10" saws; especially usefull when crosscutting. ... Read more

Subjects:  1. Shapers    2. Shaper Attachments   

Features

• Set of three matched knives
• Cuts wedge tongue profile
• High-speed steel for durability and long lasting sharpness
• Installs easily on cutterhead with existing set screws
• Fits Delta moulding cutterheads

Subjects:  1. Profile Knives    2. (Shaper Cutters)    3. (Profile Blades)    4. (Knife)   

Features

• Optional bushings available to fit a variety of spindle diameters
• Made of tough yet transparent Lexan for protection with visibility
• Mounts on spindle directly above cutters
• Ball bearing hub allows the guard to move independenly from spindle
• 6-1/2" outer diameter, 3/4" inner diameter

Subjects:  1. Shapers    2. Shaper Attachments   

Features

• 1/2" diameter, for use with cope cutters
• Installs easily in place of standard spindle
• Tapered shaft is notched for a slip-free fit
• Fits Delta heavy-duty wood shapers 43-445, 43-455, and 43-460

Subjects:  1. Shapers    2. Shaper Attachments   

Features

• Includes 7 common sizes from 3/4" to 1-1/8" diameter
• Fits 1/2" shaper spindle
• Spaces shaper cutters to create the desired profile
• Sizes available to match a variety of applications

Subjects:  1. Shapers    2. Shaper Attachments   

Features

• Optional bushings available to fit a variety of spindle diameters
• Made of tough yet transparent Lexan for protection with visibility
• Mounts on spindle directly above cutters
• Ball bearing hub allows the guard to move independenly from spindle
• 4-1/2" outer diameter, 3/4" inner diameter

Subjects:  1. Shapers    2. Shaper Attachments   

Features

• For use with Delta Shaper Cutter Sets 42-001 to 42-003
• Provides a guide for shaping irregular and curved edges
• Guides workpiece for a consistent cut
• Ball bearing construction for smooth movement
• Fits 3/4" spindles

Subjects:  1. Shapers    2. Shaper Attachments