Editorial Review

This is a rough-and-ready stand that will accommodate virtually any miter saw, but it's the oversize wheels that let you cart your saw practically anywhere--even up and down stairs--that really make it a winner. Built-in rollers support longer stock and are smooth right out of the box. The aluminum fence comes with a stop for easy duplicate cuts, and a stock-lift inhibitor keeps your cut piece from picking up after the cut. Sturdy steel legs adjust to your preferred work height, and when you're done, the stand folds quickly and easily, ready to roll. It's 84 pounds without a saw, but you'd never know it. -- Kris Jensen-Van Heste ... Read more

Features

• Folds and unfolds quickly to roll on and off of job site for quick set up
• Aluminum adapter rails accommodate any manufacturer's saw
• Aluminum fence for added support of longer materials
• Adjustable steel support legs for increased stability
• Adjustable steel rollers facilitate correct alignment of longer stock

Reviews (68)

What in the @#%!
Do you have to pay extra for all of the required parts?And do you have to pay even more for the instructions?Amazon, what is wrong with your company?I would highly suggest not to buy anything from amazon that is suppose to come in more than one piece.This looks like a nice stand, however, right now it is just a big paperweight as I can't even mount the saw to the stand.Do yourself a favor, buy elsewhere!

Delta is now Black&Decker
Being a profesional builder, I have used Delta products for years, they have been dependable tools. Recently I found out I could no longer get parts for my Delta tools because these parts are no longer being manufactured. Seeems that when Black & Decker bought out Delta, they decided not to provide any more service to existing Delta products. I've owned a few B&D tools before and can tell you they just don't last. I will not be buying B&D/Delta tools any longer.

Great once assembled.Fence may not work with 12" saws.
Now that it's assembled, I really like this thing.It's sturdy, easy to work, and easier for moving my 12" miter saw than it was to carry the saw in my arms.Best of all, once you drop the legs, the saw is ready to use -- no need to work from the floor or set-up a makeshift table or clamp the saw down or hassle with additional supports for long boards.

Mine arrived in good shape with all parts and instructions.The manual can also be downloaded from Amazon before you order.

The extension fence was a key reason for choosing this stand.It turns out that the fence cannot, normally, be used for larger saws such as my 12" DeWalt.(The cover of the manual shows two setups - one with a smaller saw and one with a larger saw - note the absence of the fence with the larger saw.)Aluminum supports are included that clamp across the top of the frame and bolt to the larger saws.Besides accommodating wider saws, the supports hang past the front and back of the frame to support deeper saws.The added depth requires that the saw be mounted toward the center of the frame so that the supports won't interfere with the wheels when the stand is folded.The trade-off is that it makes the mounting location for one of the fence brackets inaccessible.

Fortunately, my saw is no deeper than the frame.I used a hack saw to cut the aluminum supports to the depth of the frame so that I could mount the saw toward one end without interfering with the wheels.I managed to just clear the fence bracket location, but I still had to give up the clamp on the other side.This probably won't work if you have a sliding miter saw with a very deep base.(It's not so simple as just moving the saw to the end away from the wheels.)

Otherwise, there were a couple of spacing issues that were easily solved by using extra washers.I had to replace four self-threading screws that instead de-threaded, and I had to get four longer bolts after adding washers to raise the fence to the level of my saw base.

While not described in the manual, I was able to insert my own 12" x 14" tray under the fence.The frame has lips and predrilled holes to make this a simple addition. My shop vac fits neatly under the stand during use. ... Read more

Subjects:  1. Stands    2. Saw Stands    3. Miter Saws    4. (Mitre Saws)    5. (Mitersaws)    6. (Mitresaws)    7. Work Support   

Features

• Easy, bolt-together assembly
• Fits Delta 22-540 and 22-560 Planers for proper working height
• Converts bench top unit into a floor unit to free up workbench space
• Steel construction for durability and stability
• Plastic feet for stability

Reviews (6)

Great product if all the parts came together
I ordered it and when it came the box was opened and parts were missing. I figured maybe atleast they would have put it back in the box or UPS wouldn't deliver it but i was wrong. I have called and are suppose to recieve the parts. We'll see when i get them. Other then that I like delta products very much.

optional stand
Delta is now offering a free stand with a purchase of a model no. 22-565 planer. Thisis for your information only. You may want to review this situation. If this stand is the same one your offering, then my review is that this is a strong durable stand at a good price. Easy to assemble and smart looking.
Regards
Thomas a Lawrence

Great Stand -- Solid as a rock
I bought this stand for my 12 1/2" Delta 22-560 planer and it's great.It was super easy to assemble and it's rock solid.The working height is about perfect.

I considered building my own stand but a woodworking show vendor recommended this stand and he was right.If you have a 12" or 12-1/2" Delta planer, this is a great platform for it.The top is some kind of MDF but and it's hard as a rock.If you have another brand of planer and it fits on this top, I suspect it would be easy to drill mounting holes for it. The Delta 22-560 is 23 5/8" x 21 1/2" (L x W) and there's a couple of inches to spare in each dimension on the stand. I'd imagine most portable planers in the 12" to 13" class will fit.

Apparently there is also a mobile base specifically made for this stand (Delta PN:50-323) but I've not seen it in person. Since my shop is on the small side, I may buy the mobile base as well.

I will add an adjustable height roller table to use as an out feed surface and that should complete the planer workstation in my shop. ... Read more

Subjects:  1. Planers    2. Planer Stands    3. (Planners)    4. (Plainers)    5. (Surface Planers)   

Features

• Easy, bolt-together assembly
• Universal stand for use with a variety of machines
• Converts bench band saw to floor model unit, freeing up workbench space
• Steel construction for durability and stability
• Plastic feet for stability

Reviews (3)

Universal is right!
I purchased this stand for my belt/disc sander and it fits perfectly.I also discovered it is just right for my bench top drill press so I purchased another.Nice and sturdy with convenient storage underneath.

Very sturdy universal stand
I was so pleased with how rigid the stand supported my Craftsman planer; I drove right back to the store and bought three more. Heavy-duty construction reduces vibration and the possibility of injury while working with large pieces of stock. I could support my truck on one of these. Assembly is a no brainer. You get what you pay for. (QUALITY) As for holes not matching up to some machines, a drill takes care of that.

Wrong stand for 9" Band Saw
Directions provided with stand describe mounting 8" and 10" band saws. Front page includes

28-180 8" Band Saw 28-185 8" Band Saw 28-160 10" Band Saw

Does not include 28-150 9" Band Saw. Haven't found a set of holes that match up. Stand will not mount saw using 4 bolts as required. ... Read more

Subjects:  1. Stands    2. Saw Stands    3. Band Saws    4. (Bandsaws)   

Features

• Easy, bolt-together assembly
• Fits Delta 43-505 Router/Shaper for proper working height
• Converts bench top unit into a floor unit to free up workbench space
• Steel construction for durability and stability
• Plastic feet for stability

Subjects:  1. Stands    2. Shapers   

Features

• Fits Delta 40-530, 40-540, and 40-560 Scroll Saws to convert to floor stand models
• Mounts saw at a comfortable working height for easier use
• Pre-drilled for easy mounting of saw
• Simple, bolt-together assembly for easy set up

Subjects:  1. Stands    2. Saw Stands    3. Scroll Saws    4. (Scrollsaws)   

Features

• Converts bench saw into floor unit for a more permanent shop set up
• Heavy gauge steel construction for durability
• Easy bolt together assembly and pre-drilled mounting holes for quick set up
• Includes plastic feet for stability
• Fits Bench Saw models 36-540 and 36-550

Reviews (4)

I like it
I found this table very easy to assemble.It is very solid and compact.It will be easy to store and transport.So far so good!!

adequate, but not ideal
The picture does not match the stand - mine is black, and has only one bolt at each anchor point.There were no instructions in the box, but it wasn't hard to figure out.You have to do the bolts up _really_ tight for it to be rigid (I used two wrenches).However, it does hold my saw quite well.I would have preferred rubber feet, as the plastic ones don't offer much friction -- when ripping a board the whole stand sometimes slides across the floor.It's also quite expensive for what it is, especially when you compare to the price of the saw itself.

So Bad, it's almost funny
I purchased the Delta 36-519 steel stand for my table saw
in October of 2001. When I received it, at first I thought
they sent me the wrong stand. No that was the stand alright.
Here is why you may wish to consider avoiding buying this
stand. The stand pictured above is gray and it has two bolts
for each support upper and lower. Mine had one bolt per
support. That in itself would not be a major problem but what
is the problem is that the metal they used is around the
thickness of cheap sheet metal. If you put the stand together
and pick it up it shakes like jello.
The person that wrote the reveiw that liked the stand may have
bought it when perhaps it once was the stand pictured above or
of a better quality. ... Read more

Subjects:  1. Stands    2. Saw Stands    3. Table Saws    4. (Tablesaws)    5. Work Support   

Features

• Fits Delta 31-750 and 31-780 benchtop sanders
• Converts benchtop sander into floor unit for more stationary use
• Supports sander at a comfortable working height
• Heavy gauge steel construction provides a stable base for more accurate results
• Easy bolt-together construction for quick set up

Subjects:  1. Stands    2. Sanders   

Features

• Fits Delta 40-540 and 40-560 Scroll Saws to convert to floor stand models
• Mounts saw at a comfortable working height for easier use
• Pre-drilled for easy mounting of saw
• Simple, bolt-together assembly for easy set up

Reviews (1)

Stand for Delta scroll saws
Instructions for assembly were non-existent. The parts diagram,which was also to serve as the assembly directions, was unclear as towhich sites were to use lock washers in assembling. While there are provisions for the installation of casters, they would only allow the use of the type of casters which are made for the Performax Sander stands. These casters are very sturdy; can lock either/or both wheel rotation and caster direction; and they are expensive... ... Read more

Subjects:  1. Stands    2. Saw Stands    3. Scroll Saws    4. (Scrollsaws)    5. Work Support   

Features

• Designed for use with Delta 46-700 Wood Lathe for a custom fit
• Converts bench lathe to floor model unit, freeing valuable workbench space
• Holds lathe at a comfortable working height
• Heavy-gauge steel construction for durability and stability
• Simple bolt-together construction for easy set up

Subjects:  1. Stands    2. Lathes    3. (Laths)