Features

• Pin designed for delicate projects such as craft assembly
• Package includes 2,670 1/2" pins
• 23 gauge galvanized pin
• Convenient clam shell package

Subjects:  1. Accuset    2. (Acuset)    3. Fasteners    4. Collated Nails    5. Pinner Nails    6. (Colated)   

Reviews (1)

Quantity not as advertised
Although all the material on the website indicates there are 75 pieces per box, the shipment I received only had only 60 pieces per box.No big deal unless you are counting on a specific quantity. ... Read more

Features

• Pin designed for delicate projects such as craft assembly
• Package includes 2,670 5/8" pins
• 23 gauge galvanized pin
• Convenient clam shell package

Subjects:  1. Accuset    2. (Acuset)    3. Fasteners    4. Collated Nails    5. Pinner Nails    6. (Colated)   

Subjects:  1. Fasteners    2. Collated Nails    3. Framing Nails    4. (Colated)   

Features

• 500-pack
• Round head framing nails
• Fit Hitachi NR83A, NR90AC, Duo-Fast CN350
• Senco SN60, 1B003N, SN65, Makita AN8300
• Porter-Cable FR350, FR350MAG, and SN890RH

Reviews (1)

No complaints
Woo-hoo! Nails! I'm hardly a connoisseur of fasteners, but these nails worked just fine for me when I was nailing down deck boards. I don't recall any mis-fires that were caused by the nails (they were all my fault). The corrosion resistance seems good, too - a year later, the heads are still nice and shiny (I used the nails at a camp in the Adirondacks). So my advice is to try a 500-pack to see if you like them, and then load up on 'em if you do. ... Read more

Subjects:  1. Hardware    2. Fasteners    3. Nails   

Features

• 2-1/2 in. galvanized finish nail
• 15 gauge
• Fits the Botitch N60FN nail gun

Reviews (3)

Nails Jam with Porter-Cable nailer
Nails did not fit smoothly into Porter-Cable Model DA250B nailer, and they were un-usable due to constant jamming. The Porter-Cable nails supplied with the nailer worked great.

Great to do business with
I found the product to be of high quality and the delivery time was very fast and well pack. I used this product and very pleased with the proformance. It was a great experience doing business with the seller too.

Perfect!
These nails fit the Bostich gun perfectly. I never had a single problem with any nail bending or deflecting. Not one time did two nails come out at once. And they hold tight. :) ... Read more

Subjects:  1. Fasteners    2. Collated Nails    3. Finish Nails    4. (Colated)   

Subjects:  1. Cordless Tools    2. Fasteners    3. (Fastners)    4. Collated Nails    5. Finish Nails    6. (Colated)   

Features

• Finish nails used for base boards, cabinets, crown molding, and fascia
• Package includes 700 1-1/2" finish nails per clam shell
• 15 gauge non-galvanized angled finish nail.
• Accuset fasteners backed by Senco against manufacturer defects

Reviews (1)

Perfect for DeWalt and other brands
These nails work perfectly with my DeWalt D51275K 15 gauge angled finish nailer, and the size/shape of the reuseable plastic case they come in is handy for holding extra nails in the tool belt or even your back pocket.

Not mentioned in the Amazon description is the following included with the nails: "Fits SENCO SFN1, SFN30, SFN40; AccuSet A250FN; Craftsman 18432, 18442; DeWalt D51275K; Porter-Cable DA250A." There are 700 nails in the pack. The DeWalt can be finickey about nails, and it definitely likes these.

I purchased my nailer from Amazon, and at the time they were offering $25 off purchases over $199. To hit that number, the only thing I could think of was to get a variety of nails, so I added these AccuSet 1-1/2" nails, along with a pack of 2" nails and a pack of 2-1/2" nails to the shopping cart. So I got variety of nail sizes that work good with my nailer practically for free. Can't beat that. ... Read more

Subjects:  1. Accuset    2. (Acuset)    3. Fasteners    4. Collated Nails    5. Finish Nails    6. (Colated)   

Features

• Finish nails used for base boards, cabinets, crown molding, and fascia
• Package includes 700 assorted 1-1/2", 2" and 2-1/2" finish nails
• 15 gauge galvanized angled finish nail.
• Accuset fasteners backed by Senco against manufacturer defects

Subjects:  1. Accuset    2. (Acuset)    3. Fasteners    4. Collated Nails    5. Finish Nails    6. (Colated)   

Features

• 2-inch galvanized finish nails
• 15 gauge
• 4,000 per pack

Subjects:  1. Cordless Tools    2. Fasteners    3. (Fastners)    4. Collated Nails    5. Finish Nails    6. (Colated)   

Subjects:  1. Hardware    2. Fasteners    3. Nails   

Features

• Heavy duty design
• 1600 nails per pack
• Fit most other competitive heavy duty narrow crown staplers
• Convenient re-sealable storage box

Reviews (1)

Good Consistent Brad Nails
The packaging on this product makes it a great product.The strip of brads (about 25 to a strip), is held securely in place by a form fitted plastic container.The container (no top to it) slides into the box for a secure fit.The strips do not break into smaller ones or into individual brads, which would make loading the staple gun much more difficult.

Just open the bottom side of the staple gun, insert the strip of brads, close it, and you are back in business.

I use the staple gun with 1/4 inch hardwoods and plywoods, so the 9/16 inch will hold 3 pieces together.The gun does not have enough power to shoot the brad all the way down, but it does seat the brad more than half way, so an easy tap with the hammer secures the brad all the way down.This is really not a problem with me, for it is much easier than trying to drive a brad by hand without the staple gun, kind of small to handle without getting my thumb in the way.

Good price, good delivery and great packaging ensures a great product. ... Read more

Subjects:  1. Fasteners    2. Collated Nails    3. Brad Nails    4. (Colated)   

Features

• Blue tape
• Special adhesive provides resistance to leaving glue behind for up to seven days after being applied
• Controlled paper backing allows conformability

Reviews (1)

This is an terrible product!
We are disgusted with this tape!We used it to tape off our entire basement...a family room, 2 bedrooms and a bathroom.We followed the instructions perfectly and it still ripped off paint and drywall throughout our basement.Not only are we out the money used to buy this so called time saver, we have to spend days correcting what it did to our home!My husband and I have painted many rooms and projects throughout our 25 year marriage and we have never been so disgusted with a product!When speaking with friends about our dilemna, we found out that atleast 2 other couples experienced this same ordeal with this defective product! ... Read more

Features

• Finish nails used for base boards, cabinets, crown molding, and fascia
• Package includes 1,200 1-1/4" finish nails per clam shell
• 15 gauge non-galvanized angled finish nail.
• Accuset fasteners backed by Senco against manufacturer defects

Subjects:  1. Accuset    2. (Acuset)    3. Fasteners    4. Collated Nails    5. Finish Nails    6. (Colated)   

Features

• Outstanding bond strength
• Excellent Water-resistance
• Ideal for Exterior Applications
• Strong Initial Tack-Fast Set
• Excellent Sandability

Reviews (5)

Quality glue in too large a quantity...
I have been buying and using this glue for years now and I am here to say that it is an absolutely great performer. Though I have used polyurethane glues and epoxy (I have yet to try the new Titebond III), this Titebond II is the glue I turn to 99% of the time. It has never let me down in any application - I build mainly indoor furniture and jigs.

Once cured, the strength of this glue is consistently stronger than the wood around it. I have had good luck with letting it dry and scraping the squeeze-out away with a sharp chisel and/or a flexible putty knife. After sanding I have had no problems with splotchiness in finishes.

My only concern with buying it in this gallon size is the potential for waste.I made the mistake of buying too much of this glue at once a few years ago and learned the lesson that it will go bad over time.Now I always buy this glue in smaller bottles unless I know it will be used within a year.

I highly recommend this glue!

I'm Stuck on This Glue !!
This glue has all the features that I am looking for in such a simple application, yet very critical to the final product if it fails!!It applies smooth and tacky, giving enough working time to allow for final adjustments.Just enough tackyness to allow for a fit to stick without moving until the clamps can be applied. If too much glue was applied, the water cleanup is important to avoid excess sanding before final staining process.Just a damp cloth will remove the excess glue and will not leave a "glue residue" on the wood surface.

The weatherproof feature allows use of this glue on both indoor and outdoor projects.It is excellent for that bird house, bat house or garden gnome that is exposed to the outdoor elements, but not continuously exposed to water.

The gallon size makes this the most economical buy.The large mouth bottle makes refilling the application glue bottle very simple and easy to do WITHOUT having to use a funnel.

No problems, no issues, just a great sticky product that holds!

This is the best glue for money you can buy.
I've used more expensive glues before and stopped. This glue is just as good. There's plenty of working time. And best of all it's sandable. Feel comfortable creating joints without dowel or biscuits with Titebond II. ... Read more

Subjects:  1. Fasteners    2. Glue    3. Wood Glue   

Reviews (3)

Nails work in Paslode
I have bought several boxes of these nails and haven't had any problem with them in my Paslode air nailer.They are heavy and when I orded two boxes they bounced around in the packing box and split apart some so now I order one box at a time. They come in a reasonable amount of time.

B/g framing nails
Hello, complaint about the b'g framing nails ,they jam up the nailer and they won't line up in the guide ,the nails have tape to hold together ,your pic shows the thin wire which holds them together.looks like the tape builds up and keeps them from lining up in the track,I got some the bostitch nails with the thin wirefrom a friend and they work great ,so i think the b/g nails are junk even though I have used about half a box ,shoot a few ,stop unjam and shoot.eleminate the nails with the tape for the bostitck nailer.ThankPaul A. Salyers

photo is wrong
These are great nails except the photo shows wire collated instead of paper strip nails ... Read more

Subjects:  1. Fasteners    2. Collated Nails    3. Framing Nails    4. (Colated)