Features

• Made of compressed Beech wood
• For use with any plate joiner
• Adhere with water-based glues
• One year warranty, one year free service contract, 30 day no-risk trial

Subjects:  1. DeWalt    2. (De Walt)    3. Biscuits    4. (Biscuts)   

Features

• True to size in length and thickness. Clearly embossed brand name "Lamello"
• 100% Harvested Beechwood
• Defect rate of .0013% (Would find one defective biscuit out of 13,000) means No waste
• Surface designed to allow uniform glue allocation-High tensile strength
• Flat ends: guarantees excess glue remains inside the groove.Cross ribs for easy insertion

Subjects:  1. Lamello    2. (Lamelo)    3. Biscuits    4. (Biscuts)   

Features

• One Year Warranty
• 5 amps; 10,000 rpm motor
• Six cutting depths: 0, 10, 20, A, B, and max
• Antislip rubber pins for better operating control
• Adjustable fence flips for 45-degree setting

Reviews (10)

You do get what you pay for
Almost since the moment this thing came out of the box, I wished I had spent the extra money to get the Porter Cable 557. As other reviewers have pointed out in their colorful fashion, the 2 main failure points of this tool in my opinion are: 1. The fence very poorly designed. While trying to buscuit boards for a table top, the fence (which I thought I had tightened to the point of near over tightening) gradually slipped across 7 buiscuits, each cutting at it's own special height. Very dissapointing! So I re-aligned it and tried again on scrap. This time really reefing the fence lock down. Slipped again. Thrird time I used some channel locks for leverage to tighten the fence. Worked fine with no slippage. #2 problem: The dust port (as mentioned in other reviews also) is awful. Cutting red oak, ash, and cherry with the bag *OFF* allowing material to free flow (since it was plugging up with the bag on) the unit would only get through 1-2 cuts without jamming up. The problem was a baffle in the middle of the dust port. While it is probably there for strength, it catches the shavings and proceeds to completely block the chute every time! I solved this one with a rotary tool and cut the baffle out and it works fine now.The other more minor complaints like the noise and ergonomics are minor compared to these major problems. There is no easy solution I can see for the fence problem. Save your coins a little longer and buy the Porter Cable. Just don't buy the PC biscuits for either machine as they have over a 40% failure in the batch of 1000 I just bought!!

Good Basic Jointer
I purchased this as a first plate jointer to get some experience with how they can be used in my projects.I haven't experienced the issues with noise that several reviewers have noticed.Considering many of these jointers can go for double the money, and that my projects are relatively basic, this seemed to be a good match.I think this is a great unit for beginners or as a backup unit.

It's ok for the money
The noise is aweful. There's something to be said by doing things silently with fine handtools. Then there's doing things with good power tools and smooth running motors. Then there's my sons push mower that ejects plastic balls within plastic that clicks and clatters. This motor is maybe more annoying than a plastic mower.
It does the basic job, it's cheap. If you're not doing many joints or are sticking to the basics it's fine maybe give it another star for limited use. Or get a 557 for twice as much, do more, and not be annoyed by that aweful motor. ... Read more

Subjects:  1. Freud    2. (Frued)    3. Plate Joiners    4. (Jointers)    5. (Biscuit Joiners)    6. (Biscut)    7. (Cutters)   

Features

• Joins 1-1/2-inch wide material
• Full strength thickness
• Re-sealable storage tube
• 175 biscuits per tube

Features

• Fits slots cut by all standard plate joiners
• Compressed beech wood
• Swells when used with water-based glues to "lock" joints
• 1,000 pack

Reviews (2)

They're biscuits, they work, they're reasonably priced
What more can I say?

Bikits Bikits Bikits
I have been using the Porter-cable plate joiner for about4 months. I ran out of the Porter-cable biscuits right inthe middle of a project on a sunday afternoon. My regular shop was closed so I bought a "generic" brand of biscuits at the local mega home destruction center just to finish the day. What a mistake. Most of these things did not fit due major variations in thickness and poor quality. Most would split when tapped into place.I ended up throwing away 2/3 rds of these defective biscuits.I have never had any problems with the Porter-Cable biscuits. These are always high quality, consistent thickness and much stronger. My daughter says they taste better also ! ... Read more

Subjects:  1. Biscuits    2. (Biscuts)   

Features

• 7/8" arbor hole, 4" diameter blade for smooth, fast cuts
• Replacement blade for Porter Cable's model 556 plate joiner
• 12 carbide teeth for precision cutting of standard biscuit slots cleanly and accurately
• Easy attachment and removal for quick, hassle-free applications
• Sharpen blade again for longer tool life

Reviews (1)

Does what it says it does
The blade replaces easily, and the old one can be resharpened. Enough said ... Read more

Subjects:  1. Porter-Cable    2. (Portercable)    3. Blades    4. Plate Joiner Blades    5. (Biscuit Joiners)    6. (Biscut)    7. (Cutters)   

Features

• Made of compressed Beech wood
• For use with any plate joiner
• Adhere with water-based glues
• One year warranty, one year free service contract, 30 day no-risk trial

Subjects:  1. DeWalt    2. (De Walt)    3. Biscuits    4. (Biscuts)   

Features

• Compressed hardwood biscuits
• Bag of 50 splines

Subjects:  1. Biscuits    2. (Biscuts)    3. Plate Joiners    4. Plate Joiner Attachments    5. (Biscuit Joiners)    6. (Biscut)    7. (Cutters)   

Features

• Compressed hardwood biscuits
• Bag of 50 splines

Subjects:  1. Biscuits    2. (Biscuts)    3. Plate Joiners    4. Plate Joiner Attachments    5. (Biscuit Joiners)    6. (Biscut)    7. (Cutters)   

Features

• Compressed hardwood biscuits
• Box of 1000 splines

Subjects:  1. Biscuits    2. (Biscuts)    3. Plate Joiners    4. Plate Joiner Attachments    5. (Biscuit Joiners)    6. (Biscut)    7. (Cutters)   

Features

• Compressed hardwood biscuits
• Bag of 50 splines

Subjects:  1. Biscuits    2. (Biscuts)    3. Plate Joiners    4. Plate Joiner Attachments    5. (Biscuit Joiners)    6. (Biscut)    7. (Cutters)   

Features

• Compressed hardwood biscuits
• Box of 1000 splines

Subjects:  1. Biscuits    2. (Biscuts)    3. Plate Joiners    4. Plate Joiner Attachments    5. (Biscuit Joiners)    6. (Biscut)    7. (Cutters)   

Features

• Replacement blade for the JS100 or JS102 joiner
• Six tooth replacement blade
• Kickback Reducing Design
• Covered by Freud's limited lifetime warranty

Subjects:  1. Blades    2. Plate Joiner Blades    3. (Biscuit Joiners)    4. (Biscut)    5. (Cutters)    6. Plate Joiners    7. Plate Joiner Attachments   

Features

• 7/8" arbor hole, 2" diameter blade for smooth, fast cuts
• Replacement blade for Porter Cable's model 557 plate joiner
• 4 carbide teeth for precision cutting of Face Frame (FF) biscuit slots in stock as narrow as 1-1/2 inches
• Easy attachment and removal for quick, hassle-free applications
• Sharpen blade again for longer tool life

Subjects:  1. Porter-Cable    2. (Portercable)    3. Blades    4. Plate Joiner Blades    5. (Biscuit Joiners)    6. (Biscut)    7. (Cutters)   

Features

• 7/8" arbor hole, 4" diameter blade for smooth, fast cuts
• Replacement blade for Porter Cable's model 557 plate joiner
• 6 carbide teeth for precision cutting of standard biscuit slots cleanly and accurately
• Easy attachment and removal for quick, hassle-free applications
• Sharpen blade again for longer tool life

Subjects:  1. Porter-Cable    2. (Portercable)    3. Blades    4. Plate Joiner Blades    5. (Biscuit Joiners)    6. (Biscut)    7. (Cutters)   

Features

• Compressed hardwood biscuits
• Box of 1000 splines

Subjects:  1. Biscuits    2. (Biscuts)    3. Plate Joiners    4. Plate Joiner Attachments    5. (Biscuit Joiners)    6. (Biscut)    7. (Cutters)