Editorial Review

Whether replicating trim for an old Victorian house or resawing four-by stock to build furniture, Delta's made-in-the-USA 14-inch band saw is striking for its overall smart design. For starters, the saw's 1-1/2-horsepower induction motor delivers impressive power, smoothly and quietly, so it's perfect for curve cutting, but the saw isn't going to bog down when ripping hardwoods, either. The saw's nine-spoke wheels deliver more accurate tension on the blade, minimizing vibration. The heavy-duty cast-iron trunnions likewise minimize vibration to the blade. The lower blade guide on this saw rests only 3/4 inch below the table, which greatly reduces deflection in the blade and provides cleaner cuts. The large 14-by-14-inch table provides plenty of support for workpieces. The smart features don't stop there. The saw's adjustment knobs are large and easy to operate. The hinged pulley cabinet makes it easy to access the wheel for blade adjustments and changes. The closed base reduces noise and keeps dust off the motor. To cap it off, the saw comes with fantastic extras, including a rip fence, for resawing, and a mobile base--an absolutely indispensable accessory for a woodworker with a small shop. A 1/4-inch platinum pro blade and4-inch and 2-inch dust connectors are also included. --Jon Groebner ... Read more

Features

• 2-year limited warranty on machines, parts, and accessories
• 1-1/2 horsepower induction motor provides cool, quiet power
• 9 spoke computer balanced wheels eliminate vibration under load
• Includes rip-fence, premium dust collectors, and mobile base
• Blade moves at 3,000 surface feet per minute for efficient cutting

Reviews (14)

3.5 stars
I ordered this saw from Amazon.It arrived in about a week.Everything was packed securely and there was no damage or dings or scratches on the bandsaw.Assembly was very simple and straight forward.Machine runs pretty well except for mild vibration even after adjustment/tune-up.I replaced the belt witha PowerTwist belt with mild improvement. The mobile base is excellent and very sturdy.Overall, I am happy with the saw, except for the following:

1.The dust collection assembly is a piece of plastic that is held in place with a small clip.Very cheaply made dust collection system and does not work well.

2.The rip fence which is made out of aluminum is not flatvertically and I can not get it to sit 90 degrees with the table.I am planning to contact Delta to get a new fence.

3.The bandsaw wheels were out of plane when arrived from the factory, but this can be adjusted.

I hope this review was helpful.

Fantastic machine--except...
The saw itself is nothing less than I expected from Delta. I received my 28-299A in 4 days; it went together well and runs flawlessly. My only complaint is with the unbelieveably cheap, plastic dust connector. It is thin and held in place with a spring clip which falls open in use because of the weight of the 4 inch adapter and collector hose. What on earth were the Delta design engineers thinking when they decided this was an acceptable feature for this saw? I have used the saw extensively and found guide blocks and thrust bearings very easy to adjust without tools. The blade tracks perfectly even after hours of continuous use. Come on Delta...improve the dust collection and make it equal in quality to the rest of the machine!

The Good, the Bad, the OOGLY..
The Good - made in USA, good fit/finish, quality materials.Overall, better materials than my Jet jointer.

The Bad - table was not flat (off by about 1/16th).I called Delta, the lady was clueless, thought I was talking about the width measurements...She did, however send me a new table.

The OOGLY - replacement table arrived, it is more warped than the original!Also in this category, the saw vibrates more than I would like.And the dust collector is useless; I replaced it with a flat, 6x6 adapter (4") by cutting two slots in the top of the adapter and adding a screw to hold the bottom.Works great with an 1100 cfm collection system.

Also, I installed the riser, but had some difficulty with the alignment pins - they are very soft, and don't fit that well.I finally had to file them down to get the riser installed.

Overall, not terribly impressed with this product. ... Read more

Features

• Easy-to-sharpen, non-skid tip
• Single-fluted cutting edge
• Multiple steps
• Full lifetime warranty

Subjects:  1. Drill Bits    2. Drill Bit Sets    3. (Drils)   

Features

• Easy blade changes
• Factory reconditioned to perform like new! Limit 1 per order
• Advanced micro height adjuster
• Soft start and electronic brake
• Variable speed adjustment

Features

• 1" diameter and 6" long
• Micro-groove point and cutting edges with extended spurs for faster, cleaner boring action
• Forged in one piece from Irwin's own special grade tool steel
• Heat-treated full length for extra overall strength
• For 1/4" and larger electric drills

Features

• Patented 3/4" blade design with sawing action cuts branches up to 3/4" diameter
• 22" blade for extended reach and level cutting
• Wrap-around foam-grip handle increases comfort and control
• Lock-on switch for continuous running
• Pre-hardened steel blades stay sharp longer and resist rust

Subjects:  1. Landscaping Tools    2. Hand Tools    3. Shears    4. Hedge Trimmers    5. Electric   

Features

• 3-1/2¿ overall length, 2-1/8¿ diameter, .375¿ round shank
• Bores precision holes at any angle
• Extra sharp cutting edges drill smooth, flat-bottomed holes
• Fit 3/8¿ drills and drill presses

Subjects:  1. Drill Bits    2. Forstner Bits    3. (Drils)   

Features

• Mount (pictured) sold separately
• Level & laser field calibration, audio indicator, & LCD readout
• Torpedo accurate at 1/2" at 50'; Laser accurate at 1/8" at 50'
• 650nm class II diode
• Calibrate to factory specs. vertically & horizontally (1/8 in. at50 ft.)

Subjects:  1. Zircon    2. (Zirkon)    3. Measuring & Layout Tools    4. Levels    5. Torpedo Levels    6. Line Lasers   

Features

• One-year warranty through the Dewalt factory or an authorized service center
• Compact size and weight, only 3.9 pounds
• DeWalt-built Series 3000 motor delivers 300 in./lbs. of maximum torque
• 3/8" keyless ratcheting chuck
• Dual range VSR and 0-400/0-1,400 rpm

Features

• Voltage drop calculations
• Grounding conductor, overload protection, NEMA starter sizes
• Works as a regular calculator
• Full one year warranty

Subjects:  1. Measuring & Layout Tools    2. Calculators    3. (Calculaters)   

Features

• Heavy-duty nylon pouch
• Automatic opening plier tool
• One-handed, push button plier access
• Spring tension
• 5 fully locking components

Reviews (1)

Good Tool
I have 3 nice multifunction tools and this one is my favorite.It is not too big but large enough to do some tough jobs.It is also well made.It works with one hand for the pliars which is nice also.It is a good basic tool. ... Read more

Subjects:  1. Hand Tools    2. Multi-tools    3. (Swiss Army Knives)    4. (Knife)    5. (Multitools)   

Features

• Heat treated full length for extra overall strength
• Includes 1/4, 5/16, 3/8, 7/16, 1/2, 9/16, 5/8, 11/16, 3/4, 13/16, 7/8, 15/16, and 1"
• Patented micro-groove point and cutting edge with extended spurs
• For all 1/4" and larger electric drills
• Bores two times faster, lasts three times longer

Features

• Limited lifetime warranty
• 12 tools including awl and Fiskars scissors
• Includes a carbide-coated sharpener for fish hooks and knives.
• Smooth non-pinching handles
• Weighs 8 ounces

Reviews (3)

Don't leave home without it
I work as a stagehand and have had this tool for about 7 years now and love it. I use it everyday and can see working without it. The fact that I can open it with one hand in just a snap of my wrist is amazing, it has been a true life saver when I am climbing light rigs upwards of 50 feet and can only have one had free to work. It's strong construction has proven itself to be a tool that I will carry till the day I retire. Many of my co-worker use other multi-tools and they have all said that mine is much better than the ones they carry and wish that they had bought a gerber instead. It's strong, easy to use, dependable, and worth the cost. In the end you get what you pay for.

A solid, sturdy tool...
I have owned my MP600 for six years and use it almost every day.The only damage or severe wear on the tool is when I discovered that the wire cutters should not be used to cut hard steel wire.(Electrical cable, they are just fine, but steel nicks the cutters.)

The pliers can extend one-handed and slide out as smooth as silk, locking into place with a solid "click".(This does take some practice and a little wear.)All of the fold-out tools lock quickly and easily.The tools, especially the file and scissors are top-notch.The fact that the knife blade is half straight, half serrated is not the best design, in my opinion, and I would gladly give up the awl to get separate blades.

I own the optional toolkit, and use it quite often.

Tool is a "Must have on your belt"
I have had my gerber scout for about a year and have been totaly impressed with it.I have used at most of my boy scout den meetings and at all of our campouts.From opening a can to cutting open a pant leg to treat an injury it has never let me down.Easy and quick to open on handed! it's wonderful. ... Read more

Subjects:  1. (Knife)    2. (Multitools)    3. (Swiss Army Knives)    4. Hand Tools    5. Multi-tools   

Features

• 17" overall length with a 12" twist, 7/8" diameter cutter and 5/16" hex shank
• For use in drilling applications where small nails and other foreign materials may be encountered
• Single twist type with single cutter and side lip
• Hollow center twist design for fast, continuous flow of chips
• Medium-fast screw pitch, heat-treated full length, guaranteed consistent Rockwell hardness

Subjects:  1. Drill Bits    2. Ship Auger Bits    3. (Drils)   

Features

• Dual tripod mounts built-in
• Factory reconditioned to perform like new! Limit 1 per order
• Remote-controlled, wireless, self-leveling system for easy operation
• Accurate to 1/8- inch over 100 feet
• Remote control lets single user aim the dot while standing next to the target

Reviews (3)

Excellent tool... especially at this price...
What a great tool. Paid for itself in one job. I'm a professional cabinet/fixture installer and I use this level on virtually every job. I can set it up in the middle of any room and have level reference points in 5 minutes. A process that used to take two of my guys up to an hour. The three speed remote is handy AND fun to use. I just carry it in my bags and can get a level reference point anywhere in the room in seconds. Anyone that's ever installed long runs of slatwall knows how handy that can be.

Some (minor) problems. The 9-volt battery constantly disconnects in the remote. Since the cover is screwed on (with a flat head no less) I always had to run back to my toolbox to open it. After a few trips... I crammed some packing foam in and it hasn't slipped since. Also... the switch on the remote is kinda "loose" and is easy to switch on accidentally. Not a big deal... just make sure the base unit is off when you pack it up. (Which you should anyway, moving these levels with the pendulum unlocked is bad for them)

A more critical problem is that the laser point will "spread out" over distance. This is typical of "cheaper" lasers. At about 100' the "dot" grows to about a one inch circle. Since I'm usually working in 10-15000 sq. foot stores... this can be a hassle. However, the center of the dot is always level... just calls for a keen eye.

This is a great tool. I tested it against a $3,000 rotating (spinning) laser level system at one job and only went slightly out of level (1/8" down over 200'). ...

I use a simple camera tripod for my level. ...The block threads right into the unit same as it would on a camera.

I also have a robo-tools 5 beam laser unit that I LOVE!

i will never build another deck without this baby!
i am a professional carpenter and let me tell ya, this tool is worth the investment. we have built 2 decks and sided 4 houses using this laser. now we wonder how we ever got by without it. the remote is a must as it enables one person operation. uses AA and 9v batteries.i would recommend this to anyone who wants to up their quality and speed of construction.

Really good product
This tool is a really good product for the money.Moreover, it allows one person to do the work of two. ... Read more

Features

• One-year warranty through the B&D factory or an authorized service center
• Automatic Feed Spool releases line as needed-no bumping required
• Powerful 4.3 amp motor for superior trimming perfomance in heavy weeds and grass
• Groom'N'Edge button rotates 180-degrees to convert from trimming to edging
• Edge guide for precise trimming and edging

Reviews (3)

Left hand grip breaks due to inferior quality part
The metal left hand grip is attached to the handle with a flimsy plastic part that breaks from the vibrations of normal use. Mine broke after about 3 years of infrequent use in the Northeast. I stored the unit in a dark garage, so UV could not have been a factor. They should have named it "Glass Hog" instead of "Grass Hog". The time and effort required to replace the part, plus the cost of the part plus shipping, makes it uneconomic to repair the trimmer. Black & Decker design their products to last for the 2-year warranty period but not much more.

Two in Less thanTwo Years
I've just returned my second B&D string trimmer for the same mechanical problem -- the spool flies off while in use.The grooves holding the spool onto the drive shaft eventually strip.I used this product approximately twice a month during the grass-cutting season (March through October)...not heavy use in my opinion.I can only recommend that you not waste your time on this product.

Great Deal
This is a great deal on this trimmer, I have seen it for 79-99 $ in stores and this is just what I need and with free shipping too! ... Read more

Features

• 1 year limited warranty
• Uses standard 18 gauge brad nails from 5/8- to 1-1/4-inch long
• Adjustable exhaust port and depth-of-drive
• Removable non-marring tip to protect delicate work
• Quick-release nosepiece for fast clearing of jams

Subjects:  1. Porter-Cable    2. (Portercable)    3. Air Tools    4. Nailers    5. Brad Nailers    6. (Nail Guns)    7. (Nailguns)   

Features

• 18" 3 in 1 deck
• 12.0 Amp motor for plenty of power in all cutting modes
• Individual lever adjusts height at each wheel from 3/4-to-2-3/4"
• No gas, oil or tune-ups make it effortless to start and maintain
• Assembly required

Subjects:  1. Landscaping Tools    2. Mowers    3. Electric Mowers    4. (Lawn Mowers)    5. (Lawnmowers)   

Features

• Push button handle release
• Diamond ground teeth
• One-year warrantee

Subjects:  1. Blades    2. Handsaw Blades    3. (Hand Saw)   

Features

• 7-1/2" overall length with a 4-1/2" twist, 1/2" diameter cutter and 7/32" hex shank, comes in a plastic pouch
• Heat-treated full length for added strength
• Coarse screw point for fast boring in all types of wood
• 7-1/2" overall length can bore through up to three studs

Subjects:  1. Drill Bits    2. Boring Bits    3. (Drils)   

Features

• Units stack and lock together to form a customized storage center
• Locking and removable self standing bins and removable dividers
• Keyhole slots for wall mounting
• Medium size: 19-5/8" x 3-3/4" x 6-7/8"

Reviews (1)

great tool
I bought 4 of these originaly with the advice of a friend, Imounted them inside my work van on the doors (I have a window lessvan) by mounting plywood then ataching them.I really didnt thinkthey would work out very well, but was I ever wrong!! Not only do theydo what they are suppose to do (organize screws and such) But theyDONT come open when you dont want them to.I was so impressed withthem that I bought another set for the side doors of my truck. If Ihad more places for them I'd buy more!The weight I ask them to holdis incredible, and they do it!

Willy

Carpenter contractor from

Racine Wi.

... Read more

Subjects:  1. Tool Storage    2. Tool Boxes    3. (Toolboxes)