Features

• 6 sizes most commonly used for pipe tap & entrance-carbide tipped
• Arbor adapter
• 2 arbors
• 1 spare pilot drill
• Plastic carrying case

Subjects:  1. Drill Bits    2. Hole Saw Bits    3. (Drils)    4. Drill Presses    5. Drills   

Features

• 1-1/4" diameter and 6" long
• Micro-groove point and cutting edges with extended spurs for faster, cleaner boring action
• Forged in one piece from Irwin's own special grade tool steel
• Heat-treated full length for extra overall strength
• For 1/4" and larger electric drills

Features

• 7-1/2" overall length with a 4-1/2" twist, 3/4" diameter cutter and 5/16" hex shank, comes in a plastic pouch
• Heat-treated full length for added strength
• Coarse screw point for fast boring in all types of wood
• 7-1/2" overall length can bore through up to three studs

Subjects:  1. Drill Bits    2. Boring Bits    3. (Drils)   

Features

• Easy-to-sharpen, non-skid tip
• Single-fluted cutting edge
• Multiple steps
• Full lifetime warranty

Subjects:  1. Drill Bits    2. Drill Bit Sets    3. (Drils)   

Features

• 3-1/2¿ overall length, 2-1/8¿ diameter, .375¿ round shank
• Bores precision holes at any angle
• Extra sharp cutting edges drill smooth, flat-bottomed holes
• Fit 3/8¿ drills and drill presses

Subjects:  1. Drill Bits    2. Forstner Bits    3. (Drils)   

Features

• 1" diameter and 6" long
• Micro-groove point and cutting edges with extended spurs for faster, cleaner boring action
• Forged in one piece from Irwin's own special grade tool steel
• Heat-treated full length for extra overall strength
• For 1/4" and larger electric drills

Features

• Heat treated full length for extra overall strength
• Includes 1/4, 5/16, 3/8, 7/16, 1/2, 9/16, 5/8, 11/16, 3/4, 13/16, 7/8, 15/16, and 1"
• Patented micro-groove point and cutting edge with extended spurs
• For all 1/4" and larger electric drills
• Bores two times faster, lasts three times longer

Features

• 17" overall length with a 12" twist, 7/8" diameter cutter and 5/16" hex shank
• For use in drilling applications where small nails and other foreign materials may be encountered
• Single twist type with single cutter and side lip
• Hollow center twist design for fast, continuous flow of chips
• Medium-fast screw pitch, heat-treated full length, guaranteed consistent Rockwell hardness

Subjects:  1. Drill Bits    2. Ship Auger Bits    3. (Drils)   

Features

• 7-1/2" overall length with a 4-1/2" twist, 1/2" diameter cutter and 7/32" hex shank, comes in a plastic pouch
• Heat-treated full length for added strength
• Coarse screw point for fast boring in all types of wood
• 7-1/2" overall length can bore through up to three studs

Subjects:  1. Drill Bits    2. Boring Bits    3. (Drils)   

Features

• Cuts through tough materials including nail embedded wood
• Retains tough sharpness longer than the competition
• Bi-metal construction, shatterproof
• 5 pack

Subjects:  1. Blades    2. Reciprocating Saw Blades    3. Wood-Cutting Blades    4. (Sawzalls)    5. (Sawsalls)    6. (Recipracating)   

Features

• Includes: 1/2", 3/4" and 1" bits
• Bores two times faster, lasts three times longer
• Micro-groove point and extended spurs for faster, cleaner boring action

Subjects:  1. Drill Bits    2. Drill Bit Sets    3. (Drils)   

Features

• Set of two knives
• High speed steel knives
• Knives precisely positioned with two pin system
• Accurately ground, matched pair

Features

• 57-mm overall length
• Ideal for hinges and large diameter boring
• 10-mm by 26-mm shank
• Left-hand rotation
• 22-mm boring diameter

Subjects:  1. Drill Bits    2. Boring Bits    3. (Drils)   

Features

• 40-mm overall length
• Fits Nottmeyer
• For bit with 10-mm shank
• Right-hand rotation
• M8 shank thread

Features

• Highest quality carbide
• Up to three times longer lasting, ultra clean finish on laminates
• 1/2" shank
• 7/16" cutter diameter
• 1" cutter height

Subjects:  1. Routers    2. .50-inch Shank Bits    3. (1/2)   

Features

• 57-mm overall length
• Ideal for hinges and large diameter boring
• 10-mm by 26-mm shank
• Left-hand rotation
• 32-mm boring diameter

Subjects:  1. Drill Bits    2. Boring Bits    3. (Drils)   

Features

• 30-mm boring length
• Drill blind holes
• 10-mm by 20-mm shank
• Left-hand rotation
• 5-mm boring diameter

Subjects:  1. Drill Bits    2. Boring Bits    3. (Drils)    4. Brad-Point Bits   

Features

• Set of two knives
• High speed steel knives
• Knives precisely positioned with two pin system
• Accurately ground, matched pair

Features

• Top quality construction
• Use with slot cutters
• 5/16" inside diameter
• 1-1/4" outside diameter
• 5/16" depth of cut

Reviews (1)

Just awful quality
These are awful bearings. I've ordered several different sizes of these and returned them all. They all arrived with suface rust on the bearing, some had metal filings or sharp edges left on the machining and in some the bearings were sick and turned roughly. Pay the extra money and go with a better brand, like Whiteside or Amana or just about anybody else. ... Read more

Subjects:  1. Routers   

Features

• Solid carbide
• Make rail & stile joints with standard profile
• Single knife
• 2 knives required for block
• 1-5/8" cutter profile