Features

• Highest quality steel and carbide
• Create great lettering
• 1/4" shank
• 1/2" cutter diameter
• 1/4-cutter height

Subjects:  1. Routers    2. .25-inch Shank Bits    3. (1/4)   

Features

• Standard tooth style
• Fit Black & Decker 9443, Delta 28-160, 28-180
• 56-1/8" blade length
• 1/8" blade width
• 14 teeth-per-inch tooth pitch

Features

• Highest quality steel and carbide
• Make eye-catching coves or veins
• 1/4" shank
• 3/8" cutter diameter
• 3/16" radius

Subjects:  1. Routers    2. .25-inch Shank Bits    3. (1/4)   

Features

• Fast, smooth cuts with less drag and minimal waste
• The original thin kerf professional carbide saw blade
• Hand-tensioned and balanced
• C-9 carbide teeth with 54 Rockwell hardness plate for excellent durability
• Teeth are top beveled and face beveled

Subjects:  1. Blades    2. Miter Saw Blades    3. 10-inch Blades    4. (Mitre Saws)    5. (Mitersaws)    6. (Mitresaws)    7. Table Saw Blades    8. (Tablesaws)   

Features

• Highest quality steel and carbide
• For lettering veins or chamfered edges
• 1/4" shank
• 1/2" cutter diameter
• 90-degree cutter angle

Features

• Solid brass
• Perfect for template and pattern work
• 51/64" outside diameter
• 5/8" inside diameter
• 15/64" barrel length

Subjects:  1. Routers    2. Templates   

Features

• Hook tooth style
• Fit Laguna LT16, LTSEC, and similar imports
• 124" blade length
• 1/2" blade width
• 3 teeth-per-inch tooth pitch

Subjects:  1. Blades    2. Band Saw Blades    3. (Bandsaws)   

Features

• Built-in tape for easy set up
• Pre-drilled to fit Delta table saws
• 28" right, 12" left capacity for a variety of applications
• Hairline pointer allows easy, precise reading of distance
• Three-point locking system for parallel alignment to blade to 1/64"

Reviews (3)

Exaclty what I expected!
Replaced the outdated fence system that came with my Rockwell saw.I had to drill 4 new holes as the Delta/Rockwell spacing is not the same.Added new left and right extension tables.Install was less than 3 hours...2 hours building extensions.After a couple minutes of calibration, cutting to within 1/64" is repeatable.I choose this model over the universal fence as the color matches my saw.I highly recommend this fence.

Exaclty what I expected!
Replaced the outdated fence system that came with my Rockwell saw.I had to drill 4 new holes as the Delta/Rockwell spacing is not the same.Added new left and right extension tables.Install was less than 3 hours...2 hours building extensions.After a couple minutes of calibration, cutting to within 1/64" is repeatable.I choose this model over the universal fence as the color matches my saw.I highly recommend this fence.

Great Fence -Easy to Install and Use
I have an older Delta contractor saw in my garage workshop.I replaced the original fence with the beisemeyer 28in fence.It was straight forward to install.All the needed hardware was provided and the holes in the bars matched the holes in the saw table.Aligning the fence with the miter slot was simple.I just turned one of the set screws. The replacement, including removing the old fence, took about an hour.

The fence is just a pleasure to use complared to the old fence. No more using the tapemeasure to adjust the fence spacing to the saw blade. Also no more measuring twice to check that the fence was parallel to the miter slot.I just position the hairline over the tape reading desired andit is ready to cut.

The fence slides easyly over the table and locks in place by light operation of the locking lever.I am very pleased with it. ... Read more

Subjects:  1. (Tablesaws)    2. Fences    3. Table Saw Fences   

Features

• For heavy duty applications, 1/2" drills are recommended
• High speed hole saw with a handy, built-in arbor
• Cut wood, plastic, or any machinable metal including tool steel and stainless
• Instructions for safe and efficient use and longer tool life
• For small diameter holes, or larger holes in light material; can be used with 1/4" or 3/8" drills

Subjects:  1. Drill Bits    2. Hole Saw Bits    3. (Drils)   

Features

• 4-3/4" x 9" x 1-1/2"
• Mounts directly to power drill
• Removes paint and varnish from contoured surfaces

Subjects:  1. Painting Supplies    2. Paint Strippers & Removers   

Features

• 80 Grit
• 1-1/2" x 12"
• Fits Bosch model 1278VSK Compact Belt Sander
• 3 Pack

Features

• Skip tooth style
• Fit Boice Crane 800, All Sears 12"
• 80" blade length
• 3/16" blade width
• 4 teeth-per-inch tooth pitch

Features

• Hook tooth style
• Fit Duro 3022, Powermatic 141, 143
• 95" blade length
• 1" blade width
• 3 teeth-per-inch tooth pitch

Features

• Highest quality steel and carbide
• Produce strong, 1/2" deep, rabbeted joints
• 1/2" shank
• 1-3/8" cutter diameter
• 1/2" cutter height

Features

• Cuts through tough materials including nail embedded wood
• Retains tough sharpness longer than the competition
• Bi-metal construction, shatterproof
• 5 pack

Reviews (1)

lenox plaster master blade
blade is great for cutting lath & plaster & rock lath does'nt were out easily but the blades could be thicker so they don't bend as easy. ... Read more

Subjects:  1. Blades    2. Reciprocating Saw Blades    3. Multipurpose Cutting Blades    4. (Sawzalls)    5. (Sawsalls)    6. (Recipracating)